CERTAIN REPAIR TO INTERNAL ROAD INCL ROAD SIDE DRAIN AND FOOTHPATH AT VARIOUS UNITS AREA UNDER AGE BR I GE RANCHI

Amount

Preparation of Black top surface by brushing with wire brushes for removing cake mud etc, sweeping with brooms and finaly fanning the cleaned surface with comprsed air to remove all loose, dirt etc and apply evenly primming/tack coat with paving bitumen VG -10 at the rate 5 Kg per 10 Sqm complete all as directed.

M&L for bituminous premix asphaltic semi-dense concrete 40mm compacted thickness with 5.5% binder content prepared in hot mix plant using paving bitumen VG-30 by weight of total mix, rolled, spreading with mechanical paver machine and compacted to required camber and gradient complete, rolling with vibratory / static power roller of capacity 8 to 10 ton complete all as directed.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like n exc 10cm wide on roads pavments with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicatot machine all as per manufacturers instruction complet all as specified and directed.

S&F Road stud reflective type of metal body alloly with PAMA strip lens reflector with MS stud of suitable size fixed with adhesive as per manufacturers instructions complete all as directed. Make: Model no DA-972 of Dark Eye of equivalent of 3M/Sun Eyez/ M/s Texla Plastic & Metal Pvt Ltd / M/s Automat Road Safety Pvt Ltd.

S&F Soalr road stud made of aluminium alloy , 100% water proof with high efficiency mono crystalling solar panel 2.4 V/ 0.30 watt , one Ni-Mh or Ni-Cd rechargable battery (1.2v/1600MA), six super bright LEDs with 10000 to 18000 mcd, bearing weight of 10 tonnes (appx) fixed as per manufacturer's instructions complete all as directed. Make: Model DHRUV of Dark Eye or equivalent of 3M/ Sun Eyez/ M/s Texla Plastic & Metal Pvt Ltd/ M/s Automat Road Safety Pvt Ltd.

Demolition of brick wk masonry built in cement mortar incl all quoins arches pillars etc complete all as directed.

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius built in CM 1:6 complete all as directed.

M & L, 10mm thick rendering on fair faces of brick work/concrete surfaces of wall in CM (1:4) making surfaces finished even & fair complete all as directed.

M & L preparation of new plastered surface of wall and applying three coats of white wash complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level) complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving exc 15cm thick (below or above ground level) complete all as directed.

M&L 75mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in Sub-base of floor complete all as directed.

M &L for Sand filling under floors or in foundations including watering and consolidation complete all as directed.

M & L machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laid over sand cushioning complete all as directed.

M&L Providing, cement concrete type B0 1:2:4 (12.5 mm graded stone aggreate) as in coping etc similar work complete all as directed.

M&L for 100mm thick cement concrete type B2 1:2:4 (40mm graded aggreate) complete all as directed.

M&L for reinforced concrete pipes 300mm dia bore, class NP-2, laid and jointed complete all as directed.

M&L for reinforced concrete pipes 450mm dia bore, class NP-2, laid and jointed complete all as directed.

M&L cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in foundation complete all as directed.

Demolition of cement concrete (reinforced) Concrete of any description and in any position not otherwise specifically provided for complete all as directed.

M&L for RCC (Nominal Mix) Type B1 ,1:2:4 using 20 mm graded stone aggregates as in Columns, pillars, piers, posts and struts etc complete all as directed.

Use & waste formwork to sides and soffits, sides of pillars, posts, struts, piers, columns and stanchions including fair finished surface complete all as directed.

M&L TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as directed.

All as per above item but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as directed.

Dismantling structural steel work in cluding doors, gates but excluding framed truss etccomplete all as directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W(Gde E-250) quality-A complete all as directed.

M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165 complete all as directed.

M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described complete all as directed.

M&L for Plain cement Concrete C2,1:3:6 (40mm graded stone aggregate) as in surface channels and drains complete all as directed.

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc complete all as directed.

M & L for RCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc complete all as directed.

Use & waste form work to soffits of suspended slab such as floor or roof slab, chajjas and similar work not exc 200 mm thick (Horizontal or sloping) for flat rough finished complete complete all as directed.

HIND CONSTRUCTIONS

Sabitri Jhunu Enterprise

M/S Manoj Kumar Sinha

M/s Kundu Enterprises

M/S ABHAY KUMAR AND BROTHERS

M K Enterprises

Nand Lal and Sons