Karnataka

AOC

Works

Buildings

Construction of Muslim Samuday Bhavan at Bheemalli village in Chittapur Taluka under MLA LAD for the year 2024-25 (for CAT-I Bidders only)

Rural Development and Panchayat Raj Department

RDPR Division Office Kalaburgi | Kalaburagi, Karnataka

Amount: ₹4.9 LCloses: 23 Apr 2026Closed

Timeline

Published9 Apr 2026
Closed23 Apr 2026
Awarded—

Bids

1 Bid23 Apr 2026

#	Company	Amount	Status
1	Sagar ₹4.7 Laccepted-aoc	₹4.7 L	accepted-aoc

Tender Value

₹4.9 L

EMD Value

₹6,500

Closing Date

23 Apr 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

SHAMSUNDAR KALEKAR

Mobile Number

Work Description

Construction of Muslim Samuday Bhavan at Bheemalli village in Chittapur Taluka under MLA LAD for the year 2024-25 (for CAT-I Bidders only)

Tender Information

Tender ID

RDPR/2025-26/BD/WORK_INDENT24261

Reference Number

RDPR/2025-26/BD/WORK_INDENT24261

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Kalaburgi

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

Required1.Reserved Category Certificate

Required2.Valid Domicile Certificate

Required3.The Tenderer shall have valid class IV and above KPWD Licence

Required4.To qualify for award of this contract, Each tenderer in its name should have in the last five year 2021-22 to 2025-26 Achieved in at least ONE FINANCIAL years annual turnover not less than amount put to tender attach certificated from CA on Letter Head in all classes of civil engineering construction works only with UDIN No. otherwise bid will be directly Disqualified or Rejected

Required5.To qualify for award of this contract, Each tenderer in his name should have in the last five year ie 2021-22 to 2025-26 Satisfactorily completed, as prime contractor, Any One work of value not less than 25 percent work on amount put to tender attach certificate by not below rank of Executive Engineer with Indent No from eProcurement Portal

Required6.Annexure1 As per Attached Bid document should be given on Rs.100/- Stamp Paper with notary

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Financial bids of the technically qualified bidders only will be opened

Right of acceptance or rejection of any or all tenders with or without any reasons is reserved with the undersigned or any concerned higher officers of the Department

Conditional tender will not be Considered

Tender processing amount will not be refundable

Contractors should have to upload the scan copy of all necessary qualification documents, and submit the original documents certificates while tender opening evaluation for verification

The Photos and Video graphs should be taken before commencement, during execution and after completion of the work in presence of nodal officers

The liquidated damage for whole of the works are Rs. 0.10 percent per day the maximum amount of liquidated damages for the whole of works is 10 percent of final contract price

The agency shall furnish affidavit stating that existing commitments furnished by him are true. If found false action shall be taken as per law

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund

The Item Rates quoted shall include cost of Royalty charges on construction materials and other taxes as per the prevailing Government Orders at the time of execution and including cost and conveyance of all materials, curing, loading and unloading, with all leads and lifts, labour, hire charges of all machineries and equipments and all incidental charges etc complete necessary for completion of work. All the Items shall be executed as directed by the Engineer-in-charge of the work

The field laboratory shall preferably locate, adjacent to the site with the required amenity as per the clause

Self declaration of machineries are not accepted

The work should be completed within the stipulated period from the date of agreement and The date of agreement itself is the date of commencement of the work

Third party inspection is mandatory for all the works in this programme

The Tenderer shall obtain the work done certificate in the prescribed form from the competent authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate / Certificates shall be produced whenever required

Executive Engineer has authority to accept or reject any tender without assigning reason

Tenderer must submit his present accurate postal address and phone / cell phone number

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final

The bidder must submit 5 years Profit and loss account obtained from Chartered Accountant (CA) Only

The Furnished E.M.D. will be released only after successfully execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier

Before tendering for the works the tenderer may inspect the site personally

The successful tenderer shall maintain the work during the defect liability period of 365 Days from the date of completion of the work

The Tenderer shall have valid KPWD license

Other details and instructions shall be seen and fallowed as per the bidding documents KW

The Road / Building constructed under this programme shall be of high standard

Bidders should upload only prescribed documents for this work. If Unnecessary documents uploaded by the bidder then tender will be directly rejected and further correspondence will not be entertained declaration should be uploaded on bidders letter head duly signed

The work should be completed as per detail notification attached

All Rates included with all lead, lifts, loading and unloading charges, cost and conveyance of all materials, labour, equipments incidental Charges, etc., complete. and as per specification and directions of the Engineer incharge of the work

Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work if work is awarded Graduate / Diploma Engineer Civil 1 Nos. & Literate Assistant Any Degree Passed 1 Nos

All Terms and Conditions as per Bid Document

Incorrect Bid Capacity submitted by the Bidder will not be considered and the bid will be rejected

Bidders should upload only prescribed documents for this work if unnecessary documents uploaded then bid will be directly rejected

Profit and Loss Account / Audit Report Last 5 Year

Latest Income Tax

Name of the Equipment Machineries All machinery Documents are RC Book will be verified from E Vahan website

Arbitration Clause 24, As per Govt. Order LAQ LAC 198 2024 Dated 16.11.2024 (a)incorporations of Arbitration clauses in the Government Contractors / Tender in Exercise of the power conferred under the Section 21 of General Clauses Act, 1897 the Circular No.LAW 273 LAC 2012 (p) dt:10.01.2014 regarding incorporation of Arbitration in contract/tenders etc., is withdrawn with immediate effect

33.Payments 33.1 Payments shall be adjusted for deductions for advance payments other than recoveries in terms of contract and taxes, at source, as applicable under the law. The Employer shall as far as possible, pay the Contractor within 60 days of submission of bill. The contractor shall be liable to pay liquidated damages for shortfall in progress. For progress beyond the agreed programme, payment is subject to availability of the grants. (GOVERNMENT ORDER NO: FD 678 EXP-12/2023 BANGALORE, DATED:06.06.2025)

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹6,500

Important Dates

Last Activity

23 Apr 2026

Published

9 Apr 2026

Download Ends

23 Apr 2026

BOQ Preview

•

Construction of Muslim Samuday Bhavan at Bheemalli village in Chittapur Taluka under MLA LAD for the year 2024-25.

•

Providing and laying in position Reinforcement Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. T...

•

Centering Charges for Column 70% with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments ncidental Charges etc., complete and as per specification a...

•

Centering Charges for beam with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments ncidental Charges etc., complete and as per specification and dir...

•

Centering Charges for Slab with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments ncidental Charges etc., complete and as per specification and dir...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled

•

including making plaster groves (excluding cost of cement concrete a...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

•

fine sand) on concrete surface / ceilings including rounding off corners

•

wherever required smooth rendering, providing and removing s...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:

•

4 fine sand) to brick masonry including rounding off corners wherever

•

required smooth rendering, providing and removing scaffolding, in...

•

Providing and laying in position Cement Concrete for levelling course for

•

all works in foundation. The granite/trap/basalt crushed graded coarse

•

aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 80mm wide top rail and stiles 100mm wide as per dr...

•

Providing and fixing in position Mathi / Nandi wood fully panelled shutters

•

for windows with stiles and rails of 25mm. thick, 75mm wide in two halves with panels of 20mm thick including cost of materi...

•

Providing and fixing bright finished brass hanging type floor door stopper

•

with necessary screws, etc. complete. with all lead, lifts, loading & unloading charges, cost and conveyance of all materials...

•

Providing and fixing chromium plated brass handles of 100/125 mm with

•

necessary screws etc. completewith all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equ...

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

•

coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to

•

required colour or shade, with necessary screws etc...

•

Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete.with all lead, lifts, loading & unloading charges, cost and conveyance of ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Bid Document 38 Works 23 April 2026.zip

Tender Document • 5.52 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Sagar

₹4.7 Laccepted-aoc