Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.4 CrAdmitted-Finance | ₹5.4 Cr | L1 | Admitted-Finance |
| 2 | L2₹5.6 Cr+₹10.4 L (1.92%)Admitted-Finance | ₹5.6 Cr+₹10.4 L (1.92%) | L2 | Admitted-Finance |
| 3 | L3₹5.6 Cr+₹13.2 L (2.43%)Admitted-Finance A 1 BLOCK A ASTHA APRTMENT BHOJUBEER NEAR CIRCUIT HOUSE VARANASI UTTAR PRADESH 221002 UDYAM UP 75 0008931 | VARANASI | UTTAR PRADESH | 221002 | ₹5.6 Cr+₹13.2 L (2.43%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | KHAN ENTERPRISES L2 | GANGA ELECTRICALS L1 | M/S Grid Power Systems L3 |
|---|---|---|---|---|---|---|
| 0.00Installation of 250 KVA/400 KVA, 11/0.4KV T/F Replacement of Jarjar/Damaged AB Cable and other System Improvement Works at various Substations under EUDC-I, Prayagraj under the fund grant by AIIB 2023-24, including loading, unloading & Carriage of materials from Store Center Naini to working site and vice-versa. In the direct supervision of EE, EUDD-RB/Naini/KD/KB, Praygraj | ||||||
| 1.00 | Erection, grouting, plinthing,earthing & Painting of 11 Mtr. long STP Double pole including fixing of all necessary clamps, other accessories like Top channel, base channel, Pin insulator with pin etc. and its grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr. with cement, coarse sand & brick blast in ratio 1:4:8 and 12 mm thick plastring around the plinth in ratio 1:2:4 with 12 mm thickness curing of plinth should be done properly for 11 KV line (Grouting, plinthing & required materials like Clamps, Stone pad, nut & bolt, M.S. Channel, Base Channel, M.S. Brasing Angle etc. as per site requirment will be arranged by the contractor and STP, Earthing Rod with G.I. wire, pin insulator with pin and Disc Insulator with Fitting will be provided by the department.) | 80 | No. | 39,700 ₹31,76,000 | 38,999 ₹31,19,920 Lowest | 39,900 ₹31,92,000 |
| 2.00 | Erection, grouting, plinthing,earthing & Painting of 11 Mtr. long STP Single pole including fixing of all necessary clamps and its grouting in ratio 1:4:8, cement, stone grit & coarse sand, (Grouting,& all required materials will be provided by contractor except 11 Mtr STP) | 40 | No. | 11,840 ₹4,73,600 | 10,999 ₹4,39,960 Lowest | 11,900 ₹4,76,000 |
| 3.00 | Construction of T/F Plinth of size 1.5x1.5x1.25 mtr on a padding 0.25m deep in the Ground, in ratio 1:5:10 cement, sand and brick ballast on the top of padding brick work of Ist class bricks of 0.95m height and 0.35 meter thick wall will be constructed. Rest wall should be 0.23 mtr thickness, brick work will be in ratio 1:4 cement and sand. In the hollow portion the sand should be filled from ground level upto 15 cm below from the top of plinth, cement, sand and ballast should be placed in ratio 1:24 and 2 nos. Channels of size 50x100x1500 mm be grouted in the concrete. The T/F Plinth should be plastered on all sides by 12 mm thick in 1:6 Cement and Morter. (All materials will be provided by the conctractor at his own cost.) | 32 | No. | 35,870 ₹11,47,840 | 34,999 ₹11,19,968 Lowest | 36,050 ₹11,53,600 |
| 4.00 | Repairing of Existing T/F Plinth (All materials will be provided by the conctractor at his own cost.) | 8 | No. | 19,950 ₹1,59,600 | 19,699 ₹1,57,592 Lowest | 20,050 ₹1,60,400 |
| 5.00 | Construction of retaining wall, fabrication and erection of wiremesh fencing 5' height with locking arrangement including grouting of fabricated MS Angle 40x40x5 mm, Painting of fencing and support with all material around 11/0.4 kV Substation with D.P. Box of size 2x (5+3x2) Sq.mm.. The fencing shall be made of 50x25 mm 10 SWG rectangular type of wiremesh. Wiremesh shall be fixed on panel made of 40x40x5 mm MS Angle Iron. The wiremesh on panel will be supported by 25x3 mm MS Flat on all the bracings diagonally and 40x5 mm MS Angle iron horizontally at the centre of the panel. The panel will be jointed by bolts and nuts of appropriate size with each other and on the main support of the corner. (All materials will be arranged by the conctractor at his own cost.) | 1,920 | RMT | 3,134 ₹60,17,280 | 3,099 ₹59,50,080 Lowest | 3,150 ₹60,48,000 |
| 6.00 | Installation & commissioning of T/F 250 KVA along with HT/LT connections including DO, GO & 11 KV TPMO set Complete in all respect At DP. (All materials will be provided by the conctractor at his own cost. Only T/F will be provided by the Department.) | 80 | No. | 39,750 ₹31,80,000 | 39,599 ₹31,67,920 Lowest | 39,950 ₹31,96,000 |
| 7.00 | Installation & commissioning of T/F 400 KVA along with HT/LT connections including DO, GO & 11 KV TPMO set Complete in all respect At DP. (All materials will be provided by the conctractor at his own cost. Only T/F will be provided by the Department.) | 40 | No. | 39,750 ₹15,90,000 | 39,599 ₹15,83,960 Lowest | 39,950 ₹15,98,000 |
| 8.00 | Chemical pipe Earthing of Transformer body and neutral by lowering of GI pipe of size 1.50” dia 20’ deep, connecting with GI Strip of size 50x6 mm with clamp. (All materials will be preovided by the conctractor at his own cost.) | 324 | Job | 14,427 ₹46,74,348 | 14,099 ₹45,68,076 Lowest | 14,500 ₹46,98,000 |
| 9.00 | Installation,grouting and commisioning of L.T. tailes unit 1 no 500 amp and 3 no 300amp for each teansformer with cubical Box at dp/land. (All materials will be arranged by the contractor at his own cost.) | 120 | Job | 59,650 ₹71,58,000 | 59,099 ₹70,91,880 Lowest | 59,950 ₹71,94,000 |
Tender Value
₹5.7 Cr
EMD Value
₹11.3 L
Closing Date
11 Oct 2023, 2:00 pmClosed
Superintending Engineer
Superintending Engineer, E.U.D.C.-1, 57, George Town, Prayagraj
Refer to Tender Description
2023_PVVNV_834479_1
18/SE/EUDC-I-Pra/2023-24
Open Tender
Electrical Works
Lump-sum
90 days
Prayagraj
Please refer Tender documents.
2 documents required · 2 mandatory
₹11,800
Yes
Account Number-0012002100504911
₹11.3 L
Yes
14 Oct 2023
2 Sept 2023
11 Oct 2023
2 Sept 2023
11 Oct 2023
2 Sept 2023
Amount
Installation of 250 KVA/400 KVA, 11/0.4KV T/F Replacement of Jarjar/Damaged AB Cable and other System Improvement Works at various Substations under EUDC-I, Prayagraj under the fund grant by AIIB 2023-24, including loading, unloading & Carriage of materials from Store Center Naini to working site and vice-versa. In the direct supervision of EE, EUDD-RB/Naini/KD/KB, Praygraj
Erection, grouting, plinthing,earthing & Painting of 11 Mtr. long STP Double pole including fixing of all necessary clamps, other accessories like Top channel, base channel, Pin insulator with pin etc. and its grouting in ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr. with cement, coarse sand & brick blast in ratio 1:4:8 and 12 mm thick plastring around the plinth in ratio 1:2:4 with 12 mm thickness curing of plinth should be done properly for 11 KV line (Grouting, plinthing & required materials like Clamps, Stone pad, nut & bolt, M.S. Channel, Base Channel, M.S. Brasing Angle etc. as per site requirment will be arranged by the contractor and STP, Earthing Rod with G.I. wire, pin insulator with pin and Disc Insulator with Fitting will be provided by the department.)
Erection, grouting, plinthing,earthing & Painting of 11 Mtr. long STP Single pole including fixing of all necessary clamps and its grouting in ratio 1:4:8, cement, stone grit & coarse sand, (Grouting,& all required materials will be provided by contractor except 11 Mtr STP)
Construction of T/F Plinth of size 1.5x1.5x1.25 mtr on a padding 0.25m deep in the Ground, in ratio 1:5:10 cement, sand and brick ballast on the top of padding brick work of Ist class bricks of 0.95m height and 0.35 meter thick wall will be constructed. Rest wall should be 0.23 mtr thickness, brick work will be in ratio 1:4 cement and sand. In the hollow portion the sand should be filled from ground level upto 15 cm below from the top of plinth, cement, sand and ballast should be placed in ratio 1:24 and 2 nos. Channels of size 50x100x1500 mm be grouted in the concrete. The T/F Plinth should be plastered on all sides by 12 mm thick in 1:6 Cement and Morter. (All materials will be provided by the conctractor at his own cost.)
Repairing of Existing T/F Plinth (All materials will be provided by the conctractor at his own cost.)
Construction of retaining wall, fabrication and erection of wiremesh fencing 5' height with locking arrangement including grouting of fabricated MS Angle 40x40x5 mm, Painting of fencing and support with all material around 11/0.4 kV Substation with D.P. Box of size 2x (5+3x2) Sq.mm.. The fencing shall be made of 50x25 mm 10 SWG rectangular type of wiremesh. Wiremesh shall be fixed on panel made of 40x40x5 mm MS Angle Iron. The wiremesh on panel will be supported by 25x3 mm MS Flat on all the bracings diagonally and 40x5 mm MS Angle iron horizontally at the centre of the panel. The panel will be jointed by bolts and nuts of appropriate size with each other and on the main support of the corner. (All materials will be arranged by the conctractor at his own cost.)
Installation & commissioning of T/F 250 KVA along with HT/LT connections including DO, GO & 11 KV TPMO set Complete in all respect At DP. (All materials will be provided by the conctractor at his own cost. Only T/F will be provided by the Department.)
Installation & commissioning of T/F 400 KVA along with HT/LT connections including DO, GO & 11 KV TPMO set Complete in all respect At DP. (All materials will be provided by the conctractor at his own cost. Only T/F will be provided by the Department.)
Chemical pipe Earthing of Transformer body and neutral by lowering of GI pipe of size 1.50” dia 20’ deep, connecting with GI Strip of size 50x6 mm with clamp. (All materials will be preovided by the conctractor at his own cost.)
Installation,grouting and commisioning of L.T. tailes unit 1 no 500 amp and 3 no 300amp for each teansformer with cubical Box at dp/land. (All materials will be arranged by the contractor at his own cost.)
Earthing of L.T. Cubical box by M.S. earthling rod and connecting with G.I. Strips of size 50x6 mm with clamp for neutral & L.T. cubical box body. (Only M.S. Earthing rod with G.I. Wire will be provided by the Department and all other required materials will be provided by the contractor at his own cost.)
Laying of 3.5x400/3.5x240sqmm L.T. cable from T/F to L.T. Cubicle Box and from LT Cubical Box to LT Line with proper lugging and tagging with the help of copper Z/L Clamp. (Only L.T. Cable will be provided by the Department and all other required materials will be arranged by the contractor at his own cost.)
Laying of 1x630/ 1x400/1x240 sqmm /1x70 sqmm L.T. cable from T/F to L.T. Cubicle Box and from LT Cubical Box to LT Line with proper lugging and tagging with the help of copper Z/L Clamp. (Only L.T. Cable will be provided by the Department and all other required materials like as Alu. Lug,Z/L Clamps etc. will be arranged by the contractor at his own cost as per site requirement.)
Hanging of 3x120+1x95+1x16/3x95+1x70+1x16 sqmm LT ABC on already existing/erected pole complete in all respect .(all required material for hangging of AB cable like dead end clamp ,pearcing connecter,suspension clamp with i-hook ,LT DB box and others required materials will be provided by the contractor as per site requirement, only LT AB cable will be provided by the department)
Hanging of XLPE 3X120/3X185/3x70 sq mm existing & Newly Constructed 9/11 Mtr. Long STP/ Rail pole with the help of Turn-buckle & stay wire at each pole. (except XLPE cable and stay wire all required material will be provided by contractor)
Erection & grouting of stay Rod with Cement, Sand and Bricks ballast in ratio 1:4:8 and fastening the stay wire with pole and stay rod nozzling.
Stringing of ACSR Dog/Weasel conductor for nuetral wire for LT ABC to be replaced / installed
Dismantling of existing 11/0.4 KV Distribution T/F 250KVA
Dismantling of existing jarjar/damaged AB Cable
Fixing H.S. type 11 kv 3x70 sqmm outdoor box cable joints & end terminations.(All Material to be provided by contractor).
Supply of T/F Trolley for 630 KVA T/F along with its all accessories and carriage of 630 KVA T/F and 11 kv cable from store and installation of 630 KVA T/F on Trolly with making all connections complete in all respect.(Only 630KVA t/f and 11 kv cable will be provided by department,and trolley along with allaccessories to be provided by contractor)
Delta pipe earthing of power transformer with the help of 3 no GI PIPE 2" diameter 80 mtr long. In all 2 no boaring for Delta earthing must be up to water level. Connection of Nutral and body with 50x8 mm GI strip as per norms.( required materials like gi pipe, Clamps, , nut & bolt, Gi strip as per site requirment will be arranged by the contractor)
Trimining of tree branches.
KHAN ENTERPRISES
M/S Grid Power Systems
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .