SPL REP MES INSLTN OR CONVERSION OH LINE TO UNDERGROUND CABLES AND CONNECTED MISC ITEMS OF WK AND SPL REP MES INSLTN FOR REP OF OLD CI/GI PIPE LINE AND ALLIED WK AT PEDONG ALGARAH AP ALGARAH DALAPCHAND AND TEESTA TCP MIL STN UNDER GE 867 EWS

Amount

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 70 Sqmm, 3.5 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers, complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 50 Sqmm, 3.5 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers, complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 35 Sqmm, 3.5 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers, complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 25 Sqmm, 3.5 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers, complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 10 Sqmm, 2 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers, complete all as specified and as directed.

Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for foundation and getting out including forming bottom surface to required level or slope, complete all as specified and as directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and as directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and as directed.

Supply and lay DWC Cable duct pipe of size 40 mm dia confirming to IS : 16205 part 24 for laying of LT cables etc complete with all accessories, complete all as specified and as directed.

Supply and lay DWC Cable duct pipe of size 63 mm dia confirming to IS : 16205 part 24 for laying of LT cables etc complete with all accessories, complete all as specified and as directed.

Supply and lay DWC Cable duct pipe of size 75 mm dia confirming to IS : 16205 part 24 for laying of LT cables etc complete with all accessories, complete all as specified and as directed.

M & L GI tube light grade for passing through cables under the floor, along the wall of 50 mm bore dia and fixed to the poles/walls with suitable size of MS clamps and nut and botls/ washers etc including taking down old GI tubing, complete all as specified and as directed.

M & L GI tube light grade for passing through cables under the floor, along the wall of 25 mm bore dia and fixed to the poles/walls with suitable size of MS clamps and nut and botls/ washers etc including taking down old GI tubing, complete all as specified and as directed.

Dismantiling/taking out old unserviceable LT insulator any size, any type from poles, complete all as specified and as directed.

S & F for pin type insulator porcelain vitreous white/ brown or green including one galvanised mild steel spindle two GI washer and one GI nut 100mm height, 65mm dia for 1100 Volt grade, complete all as specified and as directed.

S & F for Sackle type insulator porcelain vitreous white/ brown or green including one galvanised mild steel straps of size 31 x 5 mm, washers insulator bolt of 14 mm dia and nuts complete of size 100 mm hight and 115mm dia of working pressure 1100 volts grade, complete all as specified and as directed.

S&F in repair cable route marker of size 100 mm x 100 mm x 5mm thick with GI plate with inspection threon bolted / welded to 35 mm x 35mm x6 mm angle iron 60 cm long and fixing the same in ground as required for LT cable, complete all as specified and as directed.

S&F in repairs Busbar Chambers 8 way 100 Amps outdoor type (IP 65/66) pole mounted including provision of fixing on pole by means of suitable size of clamps with nut and bolts OR provision of fixing on 50 x 50 x 6mm thick angle iron frame work upto height of 0.9mtr above ground level including necessary connection, complete all as specified and as directed. Make Havells cat part No IHBC010004 or equivalent make of SMC/Hencel.

S&F Busbar Chambers 4 way 100 Amps outdoor type (IP 65/66) pole mounted including provision of fixing on pole by means of suitable size of clamps with nut and bolts including necessary connection including taking down of old u/s bus bar, complete all as specified and as directed. Make Havells cat part No IHBC010004 or equivalent make of SMC/Hensel

M & L for Plain Cement Concrete (1:3:6) mix type C2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass-concrete etc for pole, stay etc, complete all as specified and as directed.

M & L for Plain Cement Concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregae) as in copping including necessary formwork, weathering, slightly rounded or chamfered angles, finishing of exposed surfaces of concrete to even and smooth without using extra cement, complete all as specified and as directed.

Supply and fixing of earth continuity conductor or main earthing lead fixed to wall or batten or recess or chases or burried on ground or drawn in conduit pipe or fixed to poles in repairs or any other indicated situation for the loop earthing etc. as required of size 32 x 6 mm galvanized iron strip, complete all as specified and as directed.

M&L earthing including dismantling old unserviceable complete with galvanized steel earth plate electrode 600mmX600mmX6.3mm buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and connected to and including using 32 x 6 mm galvanized MS strip wire upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES schedule Part-I, and testing on completion including necessary excavation and earth work in any type of soil, PCC(1:3:6) type C1 chamber, pre-cast RCC slab 50mm thick in cement concrete (1:2:4), type B1, reinforced with welded steel wire fabric or XPM, (weight not less than 4 Kg per Sqm) with cast iron frame, funnel with watering pipe 20mm dia medium grade, wire mesh and lugs, GI protection pipe 40 mm dia, light grade 7.5 mtr long for protection of earth lead upto test point etc, complete all as specified and as directed. Note : (a) Length of earthig connection incl GI strip and protection pipe more than 7.5 Mtr will be measured separately. (b) Contractor should conduct necessary test such as Earth continuity, earth resistance test in presence of JE (E/M)/Engr-incharge.

Description all as per item No. 23.00 above but with GI conductor 4 mm dia as earth electrode and 15mm dia protection pipe

Supply & Fixing in replacement loop type insulator vitreous porcelain white, brown, or green of size 65 X 90 mm clearance of hole 16 mm, complete all as specified and as directed.

M&L for painting of steel tubular pole of any size, vertical complete with cross arms with one coat of aluminium paint after cleaning and preparation of surfaces of poles, cross arms, painting 30 cm wide Yellow and black strip on poles up to 1.5 mtr high above coping level and numbering of size 70mmx40mm by using stencil to the pole with black synthetic enemal paint (1st grade ), complete all as specified and as directed.

M&L for Repairing of LT panel by means of replace the hinge and locking arrangement of the existing panel, tightening the cable with bus bar by means of suitable lugs, replacement of suitable indicator with colour, complete all as specified and as directed.

S & F in repairs MCCB 4 pole 160 Amps, with thermal release range 70-100% and magnetic setting adjustable, breaking capacity 36 KA, complete all as specified and as directed.

S & F in replacement of existing type MCCBs of 200 Amps, 415Volt, breaking capacity 25KA, 4 Pole, complete all as specified and as directed.

S & F in replacement of existing type MCCBs of 250 Amps, 415Volt, breaking capacity 25KA, 4 Pole, complete all as specified and as directed.

Material and labour for spray painting to outdoor/Indoor type double door LT panels/Fedder pillar box incl angle iron stand with synthetic enamel paint after cleaning the surface thouroughly with scrapper including protecting/cleaning of cables, wiring and other non painted parts, complete all as specified and as directed.

Supply and fix cable jointing kit in repairs of existing LT 1.1 KV grade cable disconnecting from site (by means of disconnecting from panel/trench by excavation) for outdoor termination Straight through tubular sleeve version type joint complete with jointing materials and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70 sqmm to 120 Sqmm, complete all as specified and as directed.

M & L Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size, including taking out old unserviceable rusted out danger plate, complete all as specified and as directed.

M & L for DK Thermoplastic cable junction boxes in repairs of make Sintex, product code GSJB-3126, IP 65 of size 270x225x135mm of metric knockouts for cable entry, weather proof for indoor/outdoor installation with and including glands/insulators and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 2/4 core and fixed to wall/Steel Poles by means of suitable size of clamps with nut and bolts complete including taking down existing existing junction box, complete all as specified and as directed. NOTE: Make of Junction box shall be Sintex/Hensel or equivalent as approved by GE

S&F in repairs/replacement of steel tubular swaged pole complete with mild steel box plate, 6 mm thick of size 300 x 300 mm, finial taper plug, pole cap, bolts, nuts, washers & screws as specified, type 410- SP-31 (9 m long), made out of ERW mild steel tubing confirming to IS-2713 Part II including drilling holes of required size for fixing cross arms etc erected in true vertical position including painting the pole with two coats of aluminium paint over a coat of red oxide primer on exposed pole surfaces and two coats of black bituminoius paint for portion embedded in concrete including painting three black/red/ bands at lower portion of pole of 1.8 m height at 300 mm spacing, painting pole No with black paint at suitable height including demolition of foundation concrete and coping, complete all as specified and as directed.

Taking up or down 20mm bore dia steel water tubing and connections etc, complete all as specified and as directed.

Taking up or down 25mm bore dia steel water tubing and connections etc, complete all as specified and as directed.

Taking up or down 40-50mm bore dia steel water tubing and connections etc, complete all as specified and as directed.

Taking up or down 80mm bore dia steel water tubing and connections etc, complete all as specified and as directed.

M&L for 20mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out, complete all as specified and as directed.

M&L for 25mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out, complete all as specified and as directed.

M&L for 40mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out, complete all as specified and as directed.

M&L for 50mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out, complete all as specified and as directed.

M&L for 80mm bore GI tubing, medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out, complete all as specified and as directed.

M&L for gun metal or bronze globe / ball valve, ISI Marked, screwed both ends suitable for 50mm bore GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make, complete all as specified and as directed.

M&L for gun metal or bronze globe / ball valve, ISI Marked, screwed both ends suitable for 40mm bore GI tubing with side way operating GI lever handle including taking down old unserviceable valve of any type / make, complete all as specified and as directed.

M&L for Providing precast cement concrete solid building block over 10cm in width and setting in mortar (1:6) using precast cement concrete Block (1:3:6) type C1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed.

M & L PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate ) as in coping including weathering, slightly rounded or chamfered angles and throating , as directed and necessary from work, complete all as specified and as directed.

M & L preparation of new plastered surfaces of walls and applying two coats of white wash on walls, complete all as specified and as directed.

M&L for sluice valve of size 100 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. including dismantling and taking out old unserviceable sluice valve from valve chamber/trenches, complete all as specified and as directed.

M&L for sluice valve of size 150 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. including dismantling and taking out old unserviceable sluice valve from valve chamber/trenches, complete all as specified and as directed.

M&L for 15 mm thick rendering CM (1:4) on other than faces of brick or concrete surfaces of external walls finished even and fair, complete all as specified and as directed.

Painting of GI pipes of any size with two coats of synthetic enamel paint after scratching the existing paint properly and cleaning the surface properly, complete all as specified and as directed.

S&F Butter Fly Valve lever operated conforming to IS 13095 of size upto 40/50 mm dia PN 1.6, connected with two end flanges suitable for connecting with GI Pipe medium grade, nut-bolts etc including taking down old unserviceable one complete with flanges nut - bolts etc, complete all as specified and as directed.

M&L for construction of Valve chamber of internal dimension/size 600 x 600 x 600 mm, with 200mm thick pre-cast PCC solid block masonry (made of PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) wall in cement mortar (1:6), with 1.6 mm thick MS sheet cover, fixed with 25x25x6 mm stiffner welded around, welded over angle iron frame of size 65 x 65 x 6 mm with locking arrangements including applying two coats of first grade synthetic enamel paint (of approved tint) over a coat of red oxide primer on steel surfaces, necessary earth work in soft/loose soil with and including 100 mm thick PCC (1:3:6) Type C-2 (using 40mm graded crushed stone aggregete) as in foundation, 50 mm thick PCC (1:2:4),Type B-1 (using 20mm graded crushed stone agregate) as in coping on top including rendering 10mm thick in cement mortar (1:6), finished even and fair and applying three coats of white wash on exposed surfaces, complete including demolition of existing unserviceable valve chamer, complete all as specified and as directed.(The chamber shall be 150 mm above the ground level).

Note : In case of doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

GEETA CONSTRUCTION (BID ID -3349852)

ANTHONY PRADHAN (BID ID -3349561)

DEEP CHANDRA JOSHI (BID ID -3348707)

MANOJ JINDAL (BID ID -3349562)

R N De (BID ID -3349993)

MOURICE CONSTRUCTION COMPANY (BID ID -3348757)

RAMESH GURUNG (BID ID -3349565)