Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.8 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹34.1 L+₹1.1 L (3.21%)Rejected-AOC | L2 | Rejected-AOC Rejected being L2 | |
| 3 | L3₹34.4 L+₹1.3 L (4.02%)Rejected-AOC | L3 | Rejected-AOC Rejected being L3 | |
| 4 | L4₹34.5 L+₹1.5 L (4.56%)Rejected-AOC | L4 | Rejected-AOC Rejected being L4 | |
| 5 | L5₹34.7 L+₹1.6 L (4.96%)Rejected-AOC | L5 | Rejected-AOC Rejected being L5 |
Tender Value
₹30.0 L
EMD Value
₹60,000
Closing Date
11 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 867 EWS
GE 867 EWS C/O 99 APO PIN-913867
REP AND REPLACEMENT OF SEWAGE LINE, SEPTIC TANK, MAN HOLES AND CLEANING OF SEWAGE LINES OF MD AND OTM ACCN AT KALIMPONG UNDER GE UNDER GE 867 EWS
2023_MES_614755_1
GE/867/TOKEN/40 OF 2023-2024
Open Tender
Civil Works
Item Rate
270 days
KALIMPONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹60,000
1 Dec 2023
21 Aug 2023
13 Sept 2023
21 Aug 2023
11 Sept 2023
4 Sept 2023
21 Aug 2023 - 31 Aug 2023
Amount
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and as directed.
Excavation in trenches exc 1.5 m in depth and n exc 3.00m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard and dense soil all as specified and as directed.
M&L for cement concrete (1:4:8) type D2 (40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete all as specified and as directed
Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil and hard and dence soil complete all as specified and as directed.
Removing surpluses excavated soil to a distance n.exc 50m and depositing at a level not exc 1.50m above the starting point complete all as specified and as directed.
Demolition and breaking up (internal dia of pipe100mm) old broken, AC, SWG soil waste and vent pipe of any bore including accessories set in cement mortar and removing rubbish from site as directed Engineer-in-Charge complete all as specified and as directed.
M&L PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 100/110 mm bore pipes all as specified and as directed.
M&L PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150/160 mm bore pipes all as specified and as directed.
S&F of 110mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches complete all as specified and as directed (Note : Excavation and earth work measured and paid separately)
S&F of 160mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches including demolation and breaking up (internal dia of pipe150mm) old broken AC, SWG soil waste and vent pipe of any bore including accessories set in cement mortar and removing rubbish from site, complete all as specified and as directed (Note : Excavation and earth work measured and paid separately)
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and as directed.
M&L for pre cast reinforced cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in landing,cover slab etc for including necessary formwork set in cement mortar 1:4 complete all as specified and as directed.
S&F of TMT bars 10mm dia and over as in reinfocement to concrete cut to length, bend to shape required including cranking, bending and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
S&F of TMT bars 6 to 8 mm dia and over as in reinfocement to concrete cut to length, bend to shape required including cranking, bending and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
S&F of TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bend to shape required including cranking, bending, spirally for hooping columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.
Demolition of cement concrete (unreinforced) at any position any description not other wise specifically provided for complete all as specified and as directed.
M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in benching of man holes, rounded or chamfered on edges including all necessary form work complete all as specified.
M&L PCC (1:3:6) type C1(using 20mm graded crushed stone aggregate) as in coping and other similar bands, including weathering, slightly rounded or chamfered angles and throating as directed and necessary form work complete all as specified and as directed.
M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth of cement concrete using extra cement including forms moulds, mitred/ stopped ends etc.
Taking down old cement plaster any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc, and removing debris from site of work complete all as directed.
M&L rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth using extra cement mixed with integral water proofing compound @ 3% by weight of cement or as per manufacturer's instruction all as specified and as directed
M&L cutting into existing manhole for connection of new drain pipe of internal diameter 150 mm & making good to pipe and rendering cement mortar (1:1), cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) typr B-1 smooth finished, and reforming benching as required.
M&L cutting into existing manhole for connection of new drain pipe of internal diameter 100 mm & making good to pipe and rendering cement mortar (1:1), cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) typr B-1 smooth finished, and reforming benching as required.
Cleaning the Gully trap, Manholes and septic tank of any size by dewatering all the water, taking out sludge, solid/rigid soil and shifting/removing the same to a distance not exceeding 100m dumped in low laying area or a newly dugged out pit as per site condition at a place as directed by Engineer-in-Charge and covering the sludge and solid deposit etc with earth and 2 cm thick lime on top surface and sprinkling bleaching powder solution and surface dressing to prevent spread out of foul smell. After taking out sludge and solid deposits, the inside of the gully trap, septic tank, manholes etc shall be cleaned with clean water in order to remove all slaked mud sludge tac cleaning the tank with bleaching powder solution and surface dressing all around the septic tank / Manholes to a distance not exc 3mtr all as specified and as directed. Note:- (i) All precautions to be taken while working in foul condition. (ii) Filled up portion of sludge only shall be measured.
Cleaning choked sewage line of 100/110mm bore pipe by rodding manually or mechanical means , watering and taking out sludge, rigid soil through manholes and removing the same to a distance not exceeding 100m or deposit in a newly dugged out pit as per site condition at a place as directed by Engineer-in-Charge and covering the sludge and solid deposit etc with earth and 2 cm thick lime on top surface and sprinkling bleaching powder solution and surface dressing to prevent spread out of foul smell. complete all as directed by Engineer-in-charge all as specified and as directed.
Cleaning choked sewage line of 150/160mm bore pipe by rodding manually or mechanical means , watering and taking out sludge, rigid soil through manholes and removing the same to a distance not exceeding 100m or deposit in a newly dugged out pit as per site condition at a place as directed by Engineer-in-Charge and covering the sludge and solid deposit etc with earth and 2 cm thick lime on top surface and sprinkling bleaching powder solution and surface dressing to prevent spread out of foul smell. complete all as directed by Engineer-in-charge all as specified and as directed.
Supply only integral water proofing compound all as specified and as directed.
Demolition of precast concrete block walling and precast concrete articles etc, built in cement mortar complete all as specified and as directed.
M&L pre cast cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) block masonry with machine pressed solid blocks, exc 10cm in width setting in cement mortar 1:6 complete all as specified and as directed.
Dismantling of brick work or stone/boulder mansonry all quoins, arches, pillars, etc built in cement mortar complete all as specified and as directed
M&L for brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.
M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar (1:6) complete all as specified and directed.
Dismantling of old PVC(SWR), AC, SWG soil waste and vent pipe75mm/100mm/110mm dia of any bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed.
S&F of 75mm PVC (SWR) drain pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed.
S&F of 110mm PVC (SWR) drain pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed.
S&F in repairs 75mm bore PVC (SWR) bend any radius with accessed door complete all as specified and directed.
S&F in repairs 110mm bore PVC (SWR) bend any radius with accessed door complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) branch pieces (single Y) equal or unequal jointing with solvent cement complete all as specified and directed.
S&F in repairs 110mm bore PVC (SWR) branch pieces (single Y) equal or unequal jointing with solvent cement complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) junction (single T) equal or unequal jointing with solvent cement complete all as specified and directed.
S&F in repairs 110mm bore PVC (SWR) junction (single T) equal or unequal jointing with solvent cement complete all as specified and directed.
S & F in repairs 75mm bore PVC (SWR) couplers including jointing with solvent cement complete all as specified and directed.
S & F of 110mm bore PVC (SWR) couplers including jointing with solvent cement complete all as specified and directed.
S & F in repairs 110x75mm bore PVC (SWR) reducer including jointing with solvent cement complete all as specified and directed.
S & F in repairs PVC 75 mm dia PVC (SWR) vent cowl of any radius all as directed and as specified by Engr-in-Charge.
S & F in repairs PVC 110 mm dia PVC (SWR) vent cowl of any radius all as directed and as specified by Engr-in-Charge.
S & F in repairs 75mm bore size PVC(SWR) floor trap, Plain with grating including jointing with solvent cement complete all specified and as directed.
M&L rendering 10 mm thick on newly fair faces of brick work, pcc block work or concrete surfaces in cm (1:4) is to be finished even and fair with integral water proofing compound @3% by weight of cement or as per manufacturer's instruction, completed all as specified.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) incl Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device with recessed bottom complete all as specified..
S&F in repairs PVC valveless, symphonic action type, flushing cistern 10ltr capacity, low level, white with inlet ball valve float and handle along with suitable flush pipe/bend including brackets complete all as directed by Engr-in-Charge. Make: PARRY WARE (SLIMLINE)/ COMMANDER/ HINDWARE
M&L for loose filling with broken bricks of gauge 40 to 80 mm in soakage pits, soakage wells etc., complete all as specified and directed by Engineer-in-Charge.
S & F in repair Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets
S&F in repair of vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) all as specified and directed.
S&F pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
S&F 32 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 Kgf / sq.cm complete all as specified and directed
S&F 32 mm dia waste cupling of PTMT ( half or full threaded) ( Minimum weight 32 mm -45 gms/ 40mm - 60 gms) fixed in repairs complete all as specified and directed
S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.
Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.
SCHEDULE OF CREDIT
HEM RAJ GURUNG
SUNIL PRADHAN
MANOJ JINDAL
ANTHONY PRADHAN
G K SUTHAR
MS BRAHMA CONSTRUCTION
DEEP CHANDRA JOSHI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .