Extension of Control room building providing foundation concrete for equipment plinth Structure plinth and other allied civil works at Thiruthuraipoondi Railway Sub Station

Amount

Clearing juliflora jungles with uprooting including all tools labour , lead, lift etc. Complete.

Site grading and levelling and sectioning by earth moving machineries including cost of all labour, lead, lift, etc, complete.

Earthwork excavation in hard stiff clay stiff black cotton hard red earth, shales, murram, gravel stoney earth, earth mixed with small size boulders and hard gravelly soil for foundation

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the buildingusing termite 250ml for 5lit of water etc. complete.

Supplying and filling M.Sand sand for foundation and basement including watering and consolidation in 15 cm layers including cost of sand all labour lead lift etc. complete

PCC 1:3:6, with 40 mm HBG m/c metal without form work including cost of all materials, cement, all labour, lead, lift, etc. complete.

PCC 1:3:6 using 20mm metal without formwork for structure and equipement plinth including cost of all materials lead, lift, etc. Complete.

RCC 1:1.5:3, mix, with 12 to 20mm HBG m/c metal with out form work below GL including cost of all materials, cement, all labour, lead, lift, etc. complete.(Raft foundation)

RCC 1:1.5:3 mix, with 12 to 20mm HBG m/c metal with form work for column including cost of all materials, cement, all labour, lead, lift, etc. complete.

PCC 1:3:6 using 20mm metal with formwork for structure plinth including cost of all materials lead, lift, etc. Complete.

PCC1:2:4 using 20mm metal with formwork for wall including cost of all materials lead, lift, etc. Complete.

RCC 1:1.5:3 mix, with 12 to 20mm HBG m/c metal with form work above GL for column including cost of all materials, cement, all labour, lead, lift, etc. complete.GRADE BEAM/plinth beam

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Continuous lintel concrete.

RCC 1:1:2 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Sunshade concrete 60cm projected, 8mm Tk. at wall and 50mm Tk. at free end.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof Beam concrete.

RCC 1:1:2 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete.160 mm thick

RCC 1:1.5:3 mix using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. ( excluding cost of steel reinforcement.) For precast cover slab concrete.

Providing MS/RTS reinforcement rod for RCC works including cutting, bending, tying and fixing in position as per drawing and specification including cost of all materials, all labour charges, lead, lift, etc. complete.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour lead lift etc ., complete. super structure, including cost of all materials, all labour charges, lead, lift, etc. complete.

Plastering with cm 1:5, 12mm thick for walls including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Plastering with CM 1:3-12mm thick for wall both interior and exterior faces including cost of all materials lead lift etc complete.

Providing projected border of 7.50cm width on top of wall in CM 1:3, 12mm thick including cost of all material labour, lead, lift, curing etc., complete.

Providing projected border of 20cm width on top of wall in cm 1:3, 20mm thick including cost of all material labour, lead, lift, curing etc., complete.

Providing weathering course with good quality of readymade cooling tiles laying over cm 1:3, and pointed with the same oiled mortor including cost of, cement all materials, curing, labour, lead and lift etc., water charges ,and including cost of material and labour for applying water proof component over the terrace etc., complete.

Providing two coats of white cement based wall putty over the plastered surface including removal of all loosly adhering materials from the wall surface with the help of emery stone,putty blade or wire brush and making the surface in just wet condition as per the specification and approved by the site engineer including cost of all materials, labour, transport,lead etc complete.

White washing two coats with white cement and robin blue pigment over a primary coat for ceiling, exposed surfaces of wall, beam, slab, sunshade, lintel, etc, including cost of all materials, lead, lift, etc., complete.

Colour washing two coats of approved Plastic emulsionover one coat of white cement primer for wall including cost of all materials, labour, lead, lift, etc., complete.

Colour washing two coats with Ultima paint over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift, etc., complete. .

Flooring with approved Vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work cost of all materials , lead, lift , etc. complete, as per standard specification

Supply and fixing in position of single leaf anodised aluminium glazed main door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with std.quality hydraulic floor spring, automatic door closure, rubber beedings, hinges, handle, etc., with 5.50mm thick sun cool glass, etc., complete. single leaf main door

Refilling with excavated earth other than sand in foundation and sides of masonry, consolidation as per std.specn.with water including all, labour, lead , lift, etc., complete.

Dewatering charges per hour including hire charges for 3/5 HP Diesal motor with Pump

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator). (SD 22)

Wiring with 2 x 2.5 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm x 100 mm x 113 mm Steel switch box with 3 mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion, with suitable colour for concealed power plug point. (SD 38)

Supply and fixing of 4' 20W LED 3000K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting(SD 88).

Supply and fixing of bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for LED bulp with guard . (SD 81)

Supply and fixing of 4'40 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes.

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 1.0m down rod including fan clamp with side plates and cross arm of size 450 mm.

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor of 1100 V Grade in suitable PVC rigid pipe concealled in wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (SD 57)

supply and fixing of Horizontal type 4 way pole neutral MCB distribution board in sheet steel enclosure with40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection.The MCBDB and MCB's should be with ISI mark)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work.

Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete

Providing PVC down fall pipe using 110mm dia 4 Kg / sqcm, PVC pipe and pvc clamp line supreme etc, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers.

Dismantling the existing brick work and removing them away as directed by the depatment engineer in charges including cost of labour ,lead, lift ,scaffloding charges etc complete.

Collection, supplying, stacking and spreading & filling of red gravel including compaction,cost of all materials lead lift labour etc complete as per the direction of site engineer.

Supply and spreading of quarry dust inside the yard as per std. spec.including cost of materials ,labour lead,lift etc

Supplying and fixing of 20mm of HB stone inside the yard as per std. spec.including cost of materials ,labour lead,lift etc

Supplying and fixing in position of 20mm dia pvc pipe of 10 kg/sq.cm from the approved manufacturer including cost of all special fixtures lead,lift, etc., complete.

Supplying and fixing of 15mm dia long body brass bibcock, Metro or L&T make with necessary specials including cost of all materials lead, lift, labour etc.,complete.

Supply & Fabrication, Transport & fixing of GI angles for cable duct with anchorage and placing in position as directed by the engineer at site including cost of angles,cutting and all labour, lead, lift, etc. Complete

Labour charges for transporting from casting yard to curing tank,curing tank , laying pre cast slab as directed by the site engineer including all labour lead lifts etc complete

Applicable GST 18%

K Rajkumar (BID ID -1407066)

K DHINAKARAN (BID ID -1407685)