civil works

BRICK WORK in cement mortar 1:5 (One cement and five crushed stone sand) using Fly ash bricks of size (230 X 110 X 70 mm) for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost).

a) For foundation and basement

Pointing the joints of machine pressed tiles with cement mortar 1:3, the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the University Engineer.

Providing and filling the tile joint with epoxy grout with following specification: Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the University Engineer. The rate inclusive of cost of materials and labour, etc., complete complying with standard specification and as directed by the University Engineer.

Supplying and fixing in position of Solid PVC DOOR SHUTTERS using 19 gauge 19mm MS Sq. tubes for styles and outer frames. 15 mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The overall size of styles shall be 50 x 30 mm.The overall size of top rail, lock rail and bottom rail shall be 75 x 30 mm.The overall size of frames shall be 50 x 45 mm, with suitable rabate for housing the shutter. etc., complete as directed by theUniversity Engineer.

a) Door with frame

b) Door without frame

Supplying and fixing in position best quality PVC soil /waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the University Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level.

a) for 75mm dia pipe

b) for 110mm dia pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

a) PVC Elbow with door i) 75mm dia pvc

ii) 110mm dia pvc

a) PVC elbow i) 75mm dia pvc

ii) 110mm dia pvc