AR and MO water supply under SD-II, CD-I, APWD, Rangat during 2023-24. SW - Strengthening and setting up of water testing laboratory

Amount

Supplying, installation, testing and commissioning of pH Monitor Bench top of Hanna edge® pH (Model no. H1 2002-02) or equivalent with required buffer/ stock solution having following specification - a) 0 to 14.00 pH x 0.01 pH b) Accuracy : 0.1 pH (pH 4 to pH 10) c) Auto calibration for pH 4, pH 7 or pH10 d) LCD display with backlight e) pH electrodes : PE-01, PE-03, PE-11, PE-21

Supplying, installation, testing and commissioning of Turbidity meter of make Lutron Electronics (Model no. TU-2016) or equivalent with required buffer/ stock solution having following specification - * Circuit Custom one - chip of microprocessor LSI circuit Display LCD size - 41mm x 34mm Range - 0.00 to 5.00 NTU, 50 to 1,000 NTU * NTU - Nephelometric Turbidity Unit * Auto range Resolution 0.01 NTU / 1 NTU Accuracy ± 5% F.S. or ± 0.5 NTU whichever is greater Light source LED, 850 nm Detector Photon Diode Standard meet ISO 7027 Response time less than 10 seconds Sample volume needed 10 ml Data Hold freeze the display reading Memory recall Minimum & Maximum value Display sampling time approx. 1 second Power off auto sut off saves battery life or manual off by push button Calibration points 0 NTU, 100 NTU Operating temperature 0 to 50°C Operating humidity less than 85% R.H. Power supply DC 1.5V battery (UMA, AAA) x 6 PCs or equivalent Power current standby approx. DC 3.5mmA Testing approx. 36mmA Weight 320 b/ 0.70 Lb (Battery is included) Dimension 155mm x 76mm x 62mm (6.1x3.0x2.4 inch) * 1piece accesorries testing bottle with 0 NTU standard solution Included testing bottle with 100 NTU standard solution - 01 piece 02 PC empty testing bottle 02 PC clean cloth 01 bottle clean solution (distilled water) 01 PC Hard carrying case, CA Accesorries * Testing bottle with 100 NTU standard solution, TU-10 NTU Testing bottle with 0 NTU standard solution, TU-0 NTU Empty testing bottle, 0601

Supplying, installation, testing and commissioning of Hand Held TDS measuring meter of make Hanna ( Model no. HI98302) DISt @ 2 TDS tester with HI73302 prob ranger 10.00 g/L (ppt), resolution 0.1 g/L (ppt), accuracy ± 2% F.S. with calibration solution HI70038 6.44 ppt.

Supplying, installation, testing and commissioning of Chlorine meter of make Lutron Electronics (model no. CL 2006) or equivalent having following specifications * Free chlorine, Total chlorine measurement. * Range : 0 to 3.5 mg/L (ppm) * Range : Auto range * Measuring principal : photometer method * Light source : LED, 525nm * Record max, min value * 10PCs free and total powder DPD are included * Free and total 1.0 mg/L standard solution are the standard accesorries * Power 1.5V battery (UM -4/AAA) x 6PCs * The measuring method is an adaptation of the USEPA method 330.5 and standard method

Supplying, installation, testing and commissioning of laboratory Floc Tester 6 positions (Jar test apparatus) of make Optics technology or equivalent having digital timer with digital RPM indicator and having following specification * Basic features Number of stations 6 Sample volume 1000 ml Mixer speed range 20 to 300 rpm Electrical supply (to mixer unit) 12V DC Maximum power consumption less than 5 amps

Supply of O - Toluidine reagent (300 test min) and colour chart for chlorine test

Supply of H2S test strip (53) kit for Bacteriological test (Min. 50 strips)

Supply of glassware required for laboratory testing

Beaker, 2 Ltr capacity of make Borosil

Beaker, 1 Ltr capacity of make Borosil

Beaker, 0.25 Ltr capacity of make Borosil

Conical flask, 0.25 Ltr capacity of make Borosil

Supply of weigh scale (Precision) chemical balance PG8-220 (0.001 gm to 200 gm) with accesorries complete

Supply of weigh scale (WENSAR) Platform balance PB100 (Capacity 100 kg, size 400x400mm) with accesorries complete

Supply and installation of bacteriological lab incubator of make Optics Technology with following specification * Double walled inside stainless steel (SS 304). * Outside mild steel painted in epoxy powder coating * Temperature range : Ambient temperature +5 to 70°C * Heating elements are placed in ribs at the bottom and sides *The door has synthetic rubber gasket * With wire mesh adjustable shelves * Two indicators with On/Off switch * To work on 220/230V AC * With one number air circulating fan for uniform temperature * Temperature controlled by microprocessor based PID temperature controller with an accuracy ± 0.5°C * Specially designed to maintain 37°C * Size inside chamber 12" x 12" x 12", Capacity 28 Ltr approx. With accesorries complete

Supplying, installation, testing and commissioning of Photo colorimeter of make Popular Science Apparatus Workshop (model PSAW- 114) or equivalent having following specifications * Accuracy ± 0.02 OD * Reproducibility ± 0.01 OD * Stability ± 0.02 OD per hour * Light source - 6.8V, 0.3amp tungsten lamp/LED * Keyboard - 1 soft touch key * Amplifier - I.C. based * Detector - Selenium photocell / Photodiode * Warm up time - 5 minutes * Sample system tubes - 10mm dia matched glass test * power source - 230V ± 10% 50Hz AC * Accesorries 05 nos glass test tubes 01 no. instrument cover 01 no. operating manual 01 no. spare lamp (fitted inside)