Sivagangai DCCB H.O.Admin Building

Amount

Earth work excavation for foundation in all classes of soils (including soft rock) except hard rocks and refilling of foundation and basement, carting away the excess soil as directed.

Laying of P.C.C. 1:5:10 for foundation using using 40mm hard broken aggregate including the cost of materials, transport charge, labour for curing all leads and lifts etc.

Pouring of R.C.C 1:1.5:3 M20 grade concrete for foundation using 20mm hard broken aggregate including the cost of materials, admixture, transport, labour charges on barbending, Fabrication, shuttering, Centering, Concreting etc., but excluding the cost of steel.

Footing:

Plinth Beam:

Columns:

Tie Beam:

Floor Beam:

Lintel Beam:

Stilt Roof Beam:

First Floor Roof Beam:

Second Floor Roof Beam:

Third Floor Roof Beam:

Headroom Roof Beam:

Floor Slab:

Stilt Floor Roof Slab:

First Floor Roof Slab:

Second Floor Roof Slab:

Third Floor Roof Slab:

Headroom Roof Slab:

Safe Room:

Staircase:

Compound Wall:

Septic Tank

Filling of excavated earth and gravel for basement in layers not more than 15 cm including the cost of Gravel, transport charges,labour for filling, watering, ramming with surface vibrator, consolidating etc.,

Brick work in C.M 1 :5 for using First Class flyash bricks for substructure including the cost of all materials, transport, hire charge, scaffolding, charge for curing etc.

Brick work in C.M 1 :5 for using First Class Burnt Clay Chamber / Wire Cut bricks for supersturcture including the cost of all materials, transport, hire charge, scaffolding, charge for curing etc.

Plastering in C.M 1 :5 including the cost of all materials, transport, hire charge for scaffolding, charge for curing, admixture etc.

Ceiling Plastering in C.M 1 :3 including the cost of all materials, transport, charge for curing, admixture etc.

Outer Plastering in C.M 1 :5 including the cost of all materials, transport, charge for curing, admixture etc.

Hire charge for steel prop scaffolding for ceiling plastering including the cost of all labour for installation, dismantling and tranport charges.

Hire charge for steel prop scaffolding for outer plastering including the cost of all labour for installation, dismantling and tranport charges.

Flooring in cm 1 :3 using Double charged virtified tiles 600mmx 600mm x 8mm including cost of all material, labour & lead lift charges. (The make and brand of the tiles should be approved by the authority before use on works)

Bathroom Flooring in cm 1 :3 using virtified tiles with 2-3mm spacers and filling the joints with MYK Lacticrete SP-100 epoxy grout including cost of all material, lead lift & labour charges. (The make and brand of the tiles should be approved by the authority before use on works)

Waterproofing of bathroom by applying of 2 coats of Fosroc brushbond RFX after cleaning up of the surface with wire brush and moisting the surface before application including cost of all material & labour charges.

Bathroom Filling using broken AAC blocks in cm 1 :8 upto required depth and placing of drain pipes with slits including cost of all material, lead lift & labour charges.

Supplying of UPVC Windows (Open Type), Ventilator as per Indian Standards including cost of all materials, fitting & transportation charges etc.,

Fixing of Rolling Shutter (Flat Type) with Gear per Indian Standards including cost of all materials, fitting & transportation charges etc.,

Providing of S.S Hand rails using 304L grade Stainless steel pipes including the cost of all materials and labour.,

Colour wash on the plastered surface after applying 2 coats of wall putty, 1 coat of primer, 2 coats of emulsion (First quality) including cost of all materials & labour charges Etc.,

A1-WIRING

Supply, Installation, testing and commissioning of surface/concealed type of point wiring with modular type switches, sockets and all materials as per the point wiring chart. The item including cost of supply and installation of 19mm(in wall) or 25mm(ceiling/wall) dia PVC conduits, couplers, junction boxes, bends, ceiling/wall plates, metal boxes, switches, sockets, draw boxes & top cover plate (3mm hylam sheet), 3 run of 1.5sq.mm FRLS copper wires, bakelite connectors, crimping type ferrules, copper lugs, brass cup washers & brass screws, clamps & screws and bolt & nuts etc. All the points shall be terminated with 300mm length of additional wires along with connector terminal blocks. The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer.

One light / exhaust fan / wall mounting fan point controlled by one No. 1-way 6 Amps switch. (upto 6m)

One fan point (with regulator) controlled by one No. 1-way 6 Amps switch. The item including cost of fan hook with metal box, top round sheet/plate and 2M stepped regulator etc. (upto 6m)

One light / wall mounting point controlled by two Nos. 2-way 6 Amps switch. (upto 9m)

One 6A dependent 5-pin socket point controlled by one no of 6A switch. (switch & socket are mounted in a dependent switch box)

One 16A dependent 5-pin socket point controlled by one no of 16A switch. (switch & socket are mounted in a dependent switch box)

One 6A independent 5-pin socket point controlled by one no of 6A switch. (switch & socket are mounted in a independent switch box)

One 16A 5-pin socket point controlled by one 16A switch . (switch & socket are mounted in a seperate switch box )

One 20A 5-pin socket point controlled by one 32A switch with indicator. (switch & socket are mounted in a seperate switch box for AC)

A2-Main Switch Board Panal

Supply, Erection, Testng and Commissioning of Indoor type Main Panel, Floor mounting tyoe, dust and vermin proof by construction of 14/16 swg CRCA sheets Compartmentalised, modular type IP 42 Protection with powder coated panel as specification below.

Digital Meter with Indicators Buzzer to be provided.

EB Incomer : 1 No - 125A, 4P, MCCB, 25KA Rating

DG Incomer : 1 No - 63A, 4P, MCB, 10KA Rating

ATS : 1 No - 125 A, 4P, ATS (Socomec - ATYSS)

Necessary single phasing preventer, LVM's and control contactors are giving due preference to the EB supply

Necessary timers are provided in all outgoings for ON DELAY feature at EB and DG supplies while changeover from one source to another

125A Aluminium Bus Bar

Outgoing : 40A, 4P, MCB, 10KA Rating - {Ground Floor Automation DB}

40A, 4P, MCB, 10KA Rating - {First Floor Automation DB}

40A, 4P, MCB, 10KA Rating - {Second Floor Automation DB}

63A, 4P, MCB, 10KA Rating - {Ground Floor Automation DB}

63A, 4P, MCB, 10KA Rating - {First Floor Automation DB}

63A, 4P, MCB, 10KA Rating - {Second Floor Automation DB}

63A, 4P, MCB, 10KA Rating - Terrace VTPN DB

32A, DP, MCB, 10KA Rating - Main [ELDB]

32A, DP, MCB, 10KA Rating - Main UPS DB

63A, 4P, MCB, 10KA Rating - {Lift}

63A, 4P, MCB, 10KA Rating - SPAREA 3 Nos

25A, DP, MCB, 10KA Rating - Ground Floor A/C DB

25A, DP, MCB, 10KA Rating - Second Floor A/C DB

25A, DP, MCB, 10KA Rating - Third Floor A/C DB

25A, DP, MCB, 10KA Rating - Bore Well

25A, DP, MCB, 10KA Rating - Sump

25A, DP, MCB, 10KA Rating - Gate Motor

25A, DP, MCB, 10KA Rating - Outdoor Utility DB

25A, DP, MCB, 10KA Rating - SPAREA 4 Nos

Cabling Top & Bottom Entry, All MCCB's shall be with Operating Handle

A3-Supply, Installation, testing and commissioning of surface/concealed type of main circuit wiring from panel/DB to DB's, DB to switch boxes and switch box to other switch boxes using 1100V grade PVC insulated multistranded FRLS copper wires, to be drawn through existing conduits. The items including cost of bakelite connectors, crimping type ferrules, copper lugs, brass cup washers & brass screws, clamps & screws and bolt & nuts etc. The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer.

3 runs of 1.5 sq.mm. FRLS copper wiring through PVC conduits.

2 runs of 2.5 sq.mm. & 1 run of 1.5 sq.mm. FRLS copper wiring through PVC conduits.

2 runs of 4.0 sq.mm. & 1 run of 2.5 sq.mm. FRLS copper wiring through PVC conduits.

A4-Supply, Installlation of surface/recessed type PVC/MS, rigid/flexible, conduits of the following sizes with required couplers, junction boxes, bends, ceiling/wall plates, metal boxes, draw boxes & top cover plate (3mm hylam sheet), clamps, screws, bolt & nuts and necessary fixing accessories etc. The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer:

20mm dia 2mm thick rigid PVC conduits.

25mm dia 2mm thick rigid PVC conduits.

32mm dia 2mm thick rigid PVC conduits.

20mm dia 1.6mm thick rigid PVC conduits.

25mm dia 1.6mm thick rigid PVC conduits.

B1-DISTRIBUTION BOARD

Supply, Installation, testing and commissioning of three phase, phase segregated, compartmentalised 8 way TPN MCB DB WITH PPI KIT Double door type with IP 43 powder coated.

Incomer - 63A, 4P, MCB - 1 No

Sub Incomer - 63A, dp, RCCB (30mA) - 3 Nos

Outgoings - 6A, SP, MCB - 8 Nos

Outgoings - 16A, SP, MCB - 8 Nos

Outgoings - 20A, SP, MCB - 2 Nos

PPI KIT - 1 No

Including all interconnections and other associated fixing accessories and all as required as per the site conditions

B2-Supply, Installation, testing and commissioning of following ways of surface/flush mounting, SPN MCB DB's of sheet steel, powder coated, IP43 protection, metal door and cable end box etc. The item including terminal connectors for all incoming and outgoing circuits, duly pre-wired with suitable size of FRLS PVC copper wires upto terminal blocks, tinned copper bus bar of suitable rating, neutral links, earth bars, detachable gland plate, interconnections by using crimping type ferrules & copper lugs, and engraving of laminated as-built circuit drawings in the door inside etc. The item including necessary chipping/cutting the wall and making good the same in case of flush mounting as required. All complete as per specifications, drawings and / or as directed by the Engineer:

B3-Supply, Installation, Testing and Commisioning of single phase, 12way SPN MCB DB Double Door typr, with IP 43 powder coated

Incomer - 25A, DP, MCB - 1 No

Outgoings - 10A, Single Pole - 8 Nos

Including all interconnections and other associated fixing accessories & all as requited as per the site conditions

C1-LUMINAIRES AND FIXTURES

Supply, Installation, testing and commissioning of following sizes of ceiling fan/wall fan, all complete as per specifications, drawings and / or as directed by the Engineer.

1200mm sweep

2 x 2 LED Lamp

D1-LT PANELS

Supply, Installation, testing and commissioning of 415V Metering board fabricated with 16G CRCA sheet steel, complete with 100Amps cut-out fuse carriers and outgoing as 125 Amps fuse switch unit. The item including the provision for multifunction meter and proper sealing arrangements etc. all complete as required by TNEB.

E1-LT CABLING

Supply, Laying, testing and commissioning of following 1.1KV grade multicore aluminium/copper conductor XLPE/PVC insulated GI round(upto 10sqmm) / flat(16sqmm and above) armoured PVC sheathed cables (without any cable joint) drawn through tray or steel supports or clamping on the ceiling/wall or pre-excavated / pre-formed trenches or GI pipe sleeves / hume pipes with suitable clamping arrangement and fixing accessories, cable route markers, cable ties, identification tags etc. all complete as per specifications, drawings and / or as directed by the Engineer.

3.5C x 16 sq.mm Copper Ar. XLPE cable

E2-Supply, Termination of the following sizes of 1.1KV XLPE/PVC insulated Al/Cu conductor cables with single compression brass cable glands and tinned copper lugs including gland earth clips, adequate size of bare copper wire connecting to the main bus bars etc. all complete as per specifications, drawings and / or as directed by the Engineer.

3.5C x 16 sq.mm Aluminium Ar. XLPE cable

G1-EARTHING

G2-Supply, Installation, testing and commissioning of earth station comprising of 50mm outer diameter and 3 meter length of GI earth electrode, including approved clamps, bolts & nuts, 450m x 450mm brick masonary chamber, heavy duty CI cover, homogeneous layers of earth enhancing backfilling materials (bentonite/fly ash) are placed around the earth pipe as per standards (IS 3043), the items including cost of excavation, backfilling of earth etc. all complete as per specifications, drawings and / or as directed by the Engineer.

25x3mm copper flat. QRO

8 SWG copper wire.

H1-TELEPHONE SYSTEM A) Supply, Fixing of RJ-11 modular type telephone outlet mounted on suitable zinc-passivated metal box complete with metal box, front plate, screws and fixing accessories etc., The item including necessary chipping/cutting the wall and making good the same incase of recessed mounting and all complete as per specifications, drawings and / or as directed by the Engineer.

B) Supply, Laying and termination of high quality 2pair 0.5sq.mm cable preferably with FR PVC insulation to be laid in existing 19mm/25mm dia 1.6mm/2mm thick PVC pipe from individual telephone to krone connector box. The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer.

I- DATA & CCTV SYSTEM a) Supply, Fixing of RJ-45 modular type telephone outlet mounted on suitable zinc-passivated metal box complete with metal box, front plate, screws and fixing accessories etc., The item including necessary chipping/cutting the wall and making good the same incase of recessed mounting and all complete as per specifications, drawings and / or as directed by the Engineer.

b) Supply, Laying and termination of high quality CAT 6 cable preferably with FR PVC insulation to be laid in existing 19mm/25mm dia 1.6mm/2mm thick PVC pipe from individual telephone to krone connector box. The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer.

J1-TELEVISION SYSTEM

a) Supply, Fixing of modular type television socket mounted on suitable zinc passivated metal box complete with metal box, front plate, screws and required fixing accessories etc. The item including necessary chipping/cutting the wall and making good the same in case of flush mounting as required. All complete as per specifications, drawings and / or as directed by the Engineer.

b) Supply, Faying and termination of closed circuit television co-axial RG6 cable laid in existing 1.6mm/2mm thick 19mm/25mm dia PVC conduit & accessories from dish to individual TV. The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer.

A: SANITARY FIXTURES AND CP FITTINGS:

Collecting from stores fixing, testing and commissioning of glazed white vitreous wall mounted European water closet MS / CI chair brackets, fischer bolts with CP bolts / nuts and with PVC flush tank , solid plastic seat and lid with heavy duty CP hinges and rubber buffers and flap etc. The work shall include cutting making of walls and floors etc. Notes: EWC with accessories will be provided by Client necessary consumables like brass screws, CP extension nipple of approved make, dia and length, wooden plugs, white cement, sealants etc.,Only drilling machines shall be used for making the holes in the walls for fixing, no wall jumper and hammer will be allowed.

Supply:

Fixing :

Collecting from stores, shifting to the place of installation and fixing testing and commissioning of glazed white colour vitreous Rectangular wash basin installed below granite/ marble with CI / MS brackets, 15mm dia CP pillar cock fitting, 32mm dia CP waste coupling with plug and chain,32mm dia CP brass bottle trap,1 nos15 mm dia - 450mm long PVC / CP cold watersupply connecting pipe, 1 no of 15mm dia CP angle stop cock for cold watersupply liness with wall flange etc., The works shall include cutting in walls and making good the walls & floors. Size of wash basin 55 x 40cm.(Granite / Marble counter will be installed by other agency)

Supply:

Fixing :

Collecting from stores, shifting to the place of installation and fixing, testing and commissioning of CP health faucet consisting of:

CP angle stop cock with wall flange.

PVC flexible tube.

Hand operated spray unit (instant type)

Supply:

Fixing :

Collecting from stores, shifting to the place of installation and fixing, testing and commissioning of 15mm dia CP long body bib cock with CP wall flange etc.

Supply:

Fixing :

Collecting from stores, shifting to the place of installation and fixing, testing and commissioning of 15mm dia CP sink cock with swinging spout (wall mounted model) for kitchen sink with CP wall flange etc. Notes: Conditions mentioned in item no.1 shall be applicable.

Supply:

Fixing :

Collecting from stores, shifting to the place of installation and fixing testing and commissioning of 15mm dia CP brass angle stop cock with wall flange and 15mm dia PVC connecting pipe for aquaguard & washing machine as specified in the drawings.

Supply:

Fixing :

Collecting from stores, shifting to the place of installation and fixing, testing and commissioning of CP brass concealed stop cock with adjustable wall flange for master control in first floor toilets. Notes: Conditions mentioned in item no.1 shall be applicable.

20 mm dia

Supply:

Fixing :

B : CPVC / UPVC PIPES AND FITTNGS (INTERNAL AND EXTERNAL WATERSUPPLY):

Providing, fixing, testing and commissioning of CPVC / jindal composite pipes confirming to ASTM standard including all CPVC / jindal composite fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 4 hours etc. making holes, including chasing in solid block masonry walls with groove cutting machine to required width and depth, making bores in walls, foundations and RCC slabs, making good the walls and bores in CC or CM 1:3 as applicable clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors.

Note: Strictly use SDR-11 grade Flow guard - CPVC pipe and fittings for internal cold water supply up to 50 mm dia.

Notes: Rate Quoted shall be inclusive of cost of other consumables like hacksaw blade, solvent for CPVC pipe of make IPS - Flow guard up to 50 mm dia etc.

INTERNAL (CONCEALED IN WALL):

COLD WATERSUPPLY - HI & LOW PRESSURE

20 mm dia (SDR-11 / COMPOSITE PIPES ) Supply:

Fixing:

INTERNAL (CONCEALED IN WALL):

HOT WATERSUPPLY

Note: Strictly use SDR-11 grade Flow guard - CPVC pipe and fittings for internal hot water supply up to 50 mm dia.

Notes: Rate Quoted shall be inclusive of cost of other consumables like hacksaw blade, solvent for CPVC pipe of make IPS - Flow guard up to 50 mm dia etc.

20 mm dia (SDR-11 / COMPOSITE PIPES ) Supply:

Fixing :

Providing, fixing, testing and commissioning of CPVC & UPVC pipes confirming to ASTM standard including all CPVC & UPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 4 hours hours etc., fixed on to the wall in vertical shafts / terrace with fabricated MS brackets of suitable size with GI 'U' clamps, bolts, nuts and GI washers including MS brackets including making good the walls and floors.

SHAFT / TERRACE & RING MAIN PIPING:COLD WATER SUPPLY - CPVC & UPVC

20 mm dia - (SDR-11) Supply:

Fixing :

25 mm dia - (SDR-11) Supply:

Fixing :

32 mm dia - (SDR-11) Supply:

Fixing :

40 mm dia - (SDR-11) Supply:

Fixing :

50 mm dia - (SDR-11) Supply:

Fixing :

25 mm dia - SCH 40 pumping Supply:

Fixing :

32 mm dia - SCH 40 pumping Supply:

Fixing :

40 mm dia - SCH 40 (gravity supply GF) Supply:

Fixing :

50 mm dia - SCH 40 (gravity supply GF) Supply:

Fixing :

HOT WATER SUPPLY& RETURN -CPVC

20 mm dia - SDR-11 Supply:

Fixing :

25 mm dia - SDR-11 Supply:

Fixing :

32 mm dia- SDR-11 Supply:

Fixing :

AC DRAIN STACK

32 mm dia (Type B / 6kg / sq.cm) Supply:

Fixing :

Providing, fixing, testing and commissioning of Flow guard CPVC & UPVC pipes confirming to ASTM standard including all CPVC & UPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 4 hours etc., laid burried underground.

UNDER GROUND BURRIED PIPING: GARDEN & PUMPING LINE

COLD WATER SUPPLY - UPVC

20 mm dia - SCH 40 Supply:

Fixing :

25 mm dia - SCH 40 Supply:

Fixing :

32 mm dia - SCH 40 (pumping) Supply:

Fixing :

40 mm dia - SCH 40 (gravity supply & garden GF) Supply:

Fixing :

25 mm dia - SDR-11 (GF Burried) Supply:

Fixing :

Providing, fixing, testing and commissioning of ball valves of brass body nickel plated with stainless steel ball, lever operated and tested to 20kg / sq.cm.

20 mm dia Supply:

Fixing :

25 mm dia Supply:

Fixing :

32 mm dia UPVC Supply:

Fixing :

40 mm dia Supply:

Fixing :

50 mm dia Supply:

Fixing :

Providing, fixing, testing and commissioning of slimseal flap type check valve / NRV with CI body and cast steel disc pressure rating PN-10 Kg / sq.cm make Intercalve.

20 mm dia Supply:

Fixing :

25 mm dia Supply:

Fixing :

32 mm dia Supply:

Fixing :

50 mm dia Supply:

Fixing :

Providing, fixing, testing and commissioning of suction `Y' / pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots.

32 mm dia Supply:

Fixing :

40 mm dia Supply:

Fixing :

50 mm dia Supply:

Fixing :

C: PVC SOIL,WASTE,VENT PIPES AND FITTINGS ( INTERNAL & EXTERNAL)

Providing, fixing, testing and commissioning of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality Type B / 6 kg / sq.cm pressure rated including all fittings, like Bends, Tees, Elbows, Collars, junction, offsets, access pipes, jointing with solvent cement followed by application of leak proof adhesive like FRP paste & laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete 1:2:4 as applicable, curing etc., complete.

Notes:

Rate Quoted shall be exclusive of cost of cement, sand and other consumables like hacksaw blade etc.

INTERNAL:

75mm dia ( Type B / 6kg / sq.cm)

Supply:

Fixing:

110mm dia ( Type B / 6kg / sq.cm)

Supply:

Fixing:

Providing ,fixing, testing and commissioning of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality type B / 6 kg / sq.cm pressure rated, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines laid in vertical shafts.

Notes:

Rate Quoted shall be exclusive of cost of cement, sand and other consumables like hacksaw blade etc.

EXTERNAL :

75mm dia ( Type B / 6kg / sq.cm)

Supply:

Fixing:

110mm dia ( Type B / 6kg / sq.cm)

Supply:

Fixing:

Providing ,fixing, testing and commissioning of PVC soil and waste pipes for underground drainage line layed under the soil with required slops, confirming to IS 4985 of Agricultural series - 6 kgs / sq.cm pressure rated with necessary specials of required size jointing with solvent followed by application leak proof adhesivesof FRP paste, including haunching / covering the joints with cement concrete 1:3:6 at all the joints and testing of joints etc. complete

Notes:

Rate is excluding for earthwork and backfilling. It shall be measured separate and paid for.

Rate Quoted shall be exclusive of cost of cement, sand and other consumables like hacksaw blade etc.

160mm dia ( 6kg / sq.cm / foam core - SN8)

Supply:

Fixing:

Providing, fixing, testing and commissioning of PVC multi inlet floor trap of self cleansing design moulded or fabricated, if not available in size mentioned below, with or without vent arm jointing with solvent cement followed by application of leak proof adhesive like FRP paste including encasing all round fixing the floor trap in cement concrete 1:2:4 ratio of size 300 x 300 mm x 250 mm height (approx) and making good the floors.

110mm dia inlet 75mm dia out let

Supply:

Fixing:

110mm dia inlet 110mm dia out let - P TRAP

Supply:

Fixing:

Providing and fixing CP grating of 6mm thick with rim including setting in floor with white cement mortar and making good the floor (Chilli Make).

Cock roch trap grating

125mm dia Supply:

Fixing:

Ordinary grating

125mm dia Supply:

Fixing:

Providing and fixing testing and commissioning of PVC waste pipe of agricultural sereis confirming to IS 4985 including all fittings like tees, elbows, bends, collars, coupling, etc jointing with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete.

Wall chasing shall be done with chasing machine to required lines and levels.

Rate Quoted shall be exclusive of cost of cement, sand and other consumables like hacksaw blade etc.

40 mm dia (15kg / sq.cm) Supply:

Fixing:

50 mm dia (15kg / sq.cm) Supply:

Fixing:

D: PVC RAIN WATER PIPES AND FITTINGS

Providing ,fixing, testing and commissioning of PVC rain water pipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure rated including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for rain water pipe lines laid in vertical shafts.

75mm dia ( Type B / 6kg / sq.cm)

Supply:

Fixing:

110mm dia ( Type B / 6kg / sq.cm)

Supply:

Fixing:

E: OTHER PLUMBING EQUIPMENTS

Collecting from stores, shifting to the place of installation and fixing, testing and commissioning of Booster pump (1 to 3 HP)with pressure tank, including a set of inlet , outlet connections, ball valve, NRV, suitable flanges,, bolts, nuts GI washers, etc., complete.

Fixing:

Collecting from stores, shifting to the place of installation and fixing, testing and commissioning of Open well sub water transfer pump (1 to 3 HP) with auto level control, including a set of inlet , outlet connections, ball valve, NRV, suitable flanges,, bolts, nuts GI washers, etc., complete. for municipal water & Filter water

Fixing:

As per IS: 13592-1992, TYPE A pipes are recommended for use in ventilation pipe work and rain water application and TYPE B pipes are recommended for use in soil and waste discharge system.

Laying of weathering coarse in cm 1 :5 using red clay tiles including cost of all material & labour charges.

Laying of paver block on outer area using un-polished cement blocks of approved design over a layer of baby chips and compacting the same using plate compactor including cost of all materials and labour charges etc.,

Supplying of TMT Steel for all RCC works including cutting, bending, tying and placing in position including cost of materials and transport.

Providing, fabricating & installing in position 4mm thickness 0.25mm skin aluminium composite cladding of "PIONEER, ALUTECH, ALSTRONG" are protected with self adhesive protection film by erecting over the wall using aluminium frames @ desired levels made with 50 x 25 x 1.2mm extruded channel sections confirming to IS-7333 mechanical properities. The frame shall be fixed on external wall surface with necessary brackets, bolt nut arrangements with screws aluminium L cleats, backer rod, wacker / dowcorning silicon sealant etc., @ all levels & heights & silicon sealant is filled in complete as per specification & design approved by the authority.

Front and Side Elevation

Designing, Fabricating, Protection, Cleaning, installing and Fixing in position Semi - Glazing System / Glass Curtain using using aluminium frames @ desired levels, The frame shall be fixed on external wall surface with necessary brackets, bolt nut arrangements with screws aluminium L cleats, backer rod, wacker / dowcorning silicon sealant etc., @ all levels & heights & silicon sealant is filled in complete as per specification & design approved by the authority.

Front and Side Elevation

VADIVELMURUGAN S K (BID ID -1392258)

KARTHIGAISAMY (BID ID -1392145)