Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.4 LAccepted-AOC 368 PHASE 4 SAS NAGAR MOHALI 160059 PB | MOHALI | SAS NAGAR | PUNJAB | 160059 | L1 | Accepted-AOC L1 Quoted | |
| 2 | L2₹11.0 L+₹1.5 L (15.5%)Rejected-AOC HOUSE NO 2734 2ND FLOOR PHASE 7 SAS NAGAR MOHALI PUNJAB | S A S NAGAR | PUNJAB | 140103 | L2 | Rejected-AOC L2 Quoted | |
| 3 | L3₹11.4 L+₹1.9 L (20.2%)Rejected-AOC H NO 982 SECTOR 16 STREET NO 17 SARASWATI VIHAR DERABASSI DISTT SAS NAGAR PB 140507 | S A S NAGAR | PUNJAB | 140507 | L3 | Rejected-AOC L3 Quoted | |
| 4 | L4₹11.7 L+₹2.2 L (23.1%)Rejected-AOC 5021 1 CAT III MODERN HOUSING COMPLEX MANIMAJRA CHANDIGARH | CHANDIGARH | CHANDIGARH | 160001 | L4 | Rejected-AOC L4 Quoted | |
| 5 | L5₹12.9 L+₹3.4 L (35.4%)Rejected-AOC H NO 1566 2 SECTOR 30 B CHANDIGARH | NA | NA | 160001 | L5 | Rejected-AOC L5 Quoted |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
14 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Chandigarh
GE AF Chandigarh PIN-160003 c/o 56 APO
PERIODICAL SERVICES TO BUILDINGS AT SECTOR 28, 31 AND 47 AT CHANDIGARH UNDER GE (AF) CHANDIGARH
2023_MES_619211_1
GE(AF)/CHD/T-39/2023-24
Open Tender
Civil Works
Item Rate
183 days
Chandigarh
All as per NIT and Tender documents
9 documents required · 9 mandatory
₹500
GE AF Chandigarh
₹40,000
Yes
29 Jan 2024
16 Sept 2023
21 Oct 2023
16 Sept 2023
14 Oct 2023
30 Sept 2023
16 Sept 2023 - 23 Sept 2023
Amount
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/ holes with cement wall care putty and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old surfaces of ceiling including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/ holes with cement wall care putty and applying one coat of white wash complete all as specified and directed.
M&L preparation of old surface of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. rubbing down and stopping of surfaces using sand paper and applying one coat of cement base paint on surface upto 18m height complete all as specified and directed.
M&L for complete removal of existing treatment, filling the cracks/ holes with cement based wall care putty, rubbing down and stopping of surfaces using sand paper and applying two coats of cement base paint on surface upto 18m height complete all as specified and directed.
M&L for complete removal of existing treatment, filling the cracks/ holes with cement based wall care putty, rubbing down and stopping of surfaces using sand paper and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces on surface upto 18m height including removing debris away from site to a designated point earmarked by local administration for removal of debris complete all as specified and directed.
M&L for preparation of old painted wooden surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel or iron surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for brick work with old size sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) in and including demolition of brick masonry built in cement mortar including all quions, arches, pillars etc. complete all as specified and directed.
All as per item No. 8.00 above but except bricks. Note: Serviceable bricks retrieved from demolition shall be used after cleaning as directed by Engineer-in-Charge.
M&L for rendering 15mm thick on fair faces of brick work or other ten fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth, without using extra cement, complete all as specified and directed.
M&L for rendering 15mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement in and including taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land complete all as specified and directed.
M&L for rendering 15mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement in and including taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar (1:3) as on concrete surfaces (such as chajjas, balcony, mumty and staircase flight ceiling etc.) finished even and smooth without using extra cement in and including Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land complete all as specified and directed. Note for item No. 12.00 & 13.00: Quoted rate shall be deemed to include for necessary scaffolding & formwork for building upto 18.00m high.
M&L for repairing the edges of RCC chajja, fascias, columns, beams & loft of stair cases etc. and like by providing PCC (1:2:4) type B-0 using graded stone aggregate including necessary formwork or provision of rendering 15mm thick (average thickness)in cement mortar (1:3) with chicken wire mesh after applying a coat of cement of slurry @3kg/sqm of surface and surface finished even and fair; area n. exc. 600mm wide in patches including taking down swollen/ damaged plaster or concrete and removing debris away from site to a designated point earmarked by local administration for removal of debris complete all as specified and directed.
M&L for preparation of new plastered/ unplastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces on surface upto 18m high complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surface of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered or unplastered walls and applying two coats of cement base paint complete all as specified and directed.
M&L for preparation of new plastered/ unplastered surfaces of wall and applying two coats of oil bound distemper over and including 1mm thick cement based wall care putty to smoothening the surface complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surface of walls and applying three coats of white wash complete all as specified and directed.
M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30cm high painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained, complete all as specified and directed.
All as per item No. 20.00 above but writing stops, commas, short lines, dashes, hyphens, brackets etc. all as specified and directed.
M&L for flush pointing to brick walls in cement mortar (1:3) in and including Raking out joints/ pointing to brick work in walls or bricks on edge in floors, surface channels, roofs, etc. built in cement mortar and removing debris away from site to a designated point earmarked by local administration for removal of debris complete all as specified and directed.
M&L for providing reinforced cement concrete (1:1½:3) type A-0 using 12.5mm graded stone aggregate as in chajja/ fascia/ beam and the like including drilling into existing RCC work and inserting/ embedding TMT bars in old RCC work and binding with existing reinforcement of beam/ column/ chajja etc. of any type in and including Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for including cutting reinforcement embedded in existing RCC work and making good to disturbed area in cement mortar and removing debris away from site to a designated point earmarked by local administration for removal of debris complete all as specified and directed. Note: (i) Quoted rate shall be deemed to include for necessary scaffolding including props as required upto 18.00m height for demolition of RCC. (ii) Use and waste formwork shall be measured and paid separately under respective item.
Use and waste formwork to soffits of suspended slabs such as chajjas, roof/ floor slabs and similar work n. exc. 200mm thick and upto 18.00m height for rough finished flat concrete surface complete all as specified and directed.
S&F mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia upto 18 mtr height complete all as specified and directed.
M&L for removing vegetation of any type from chajjas, balcony, mumty slab upto 18.00m high in any part of building including making good to disturbed surface with 50mm thick PCC (1:2:4) using 20mm graded stone aggregate mixed with water proofing compound and removing debris away from site to a designated point earmarked by local administration for removal of debris complete all as specified and directed. Note: Quoted rate shall include the cost of water proofing compound & nothing extra shall be admissible.
M&L plain cement concrete (1:2:4) type B-0 using 12.5mm graded crushed stone aggregates as in roof kerb, benching and like any description in and including Demolition of cement concrete (un-reinforced) of any description & in any position (below or above ground level) upto 18.00m height n. exc. 15cm thickness including removing debris away from site to a designated point earmarked by local administration for removal of debris complete all as specified and directed. Note: Quoted rate shall be deemed to include for necessary scaffolding & formwork for building upto 18.00m high. at height upto 18.00m complete all as specified and directed.
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scraping down smoke soot, moulds, mooss and efflorescent salts and trading oil and greasy spots etc and filling the cracks/holes with cement wall care putty including rubbing down and stoping of surfaces using sand paper and applying one coat of oil bond distemper complete all as specified and directed.
M&L for complete removal of existing treatment from internal surfaces on walls by wire brushes and applying 1mm thick cement wall care putty to obtain smooth regular/even finish surfaces by using sand paper and applying two coats of oil bond distemper, complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes with, single socketed in any length with rubber ring joints fixed to wall and making good the mouth of rain water pipe including taking down old unservicable pipe and fitting etc complete all as specified and directed.
S&F 110 mm bore PVC (SWR) bends any radius, fixed with solvent cement in any position as per site requirement complete all as specified.
S&F in repairs 100mm bore of pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
M&L for uprooting completely natural vegetation/ plants, stems of trees (upto 30cm girth) grown up on walls, parapets or in roof and making good the damaged/ disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) type B-0 using graded crushed stone aggregate to match with the existing surface complete all as specified directed.
M&L for Raking out joints of old cement concrete tiles/brick tiles built in cement mortar, laid on roof average 10 mm deep and cleaning with wire brush and re-grouting and flush pointing the joints in cement mortar (1:3) mixed with 5% of crude oil by weight of cement to make it leak proof, complete all as specified.
Dhillon Construction Company
jmv engineers
M/s APEX ENTERPRISES
MOHAMMAD RASHID
M/S Bangali Ram
M/S MANI GARG CONTRACTOR
MS FUTEC ENGINEERS
M/S MATLOOB AHMED
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .