PROVN OF BARBED WIRE FENCING AROUND SAMSARA TRG AREA AND OOD ROOM NEXT TO ARMOURY AT INS VAJRAKOSH NAVAL BASE KARWAR

Amount

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all as specified and as directed.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in fencing post and coping complete all as specified and directed.

S & F Mild Steel conforming to Fe-410W (Gde E-250) quality A as in angle post or struts in fencing fixed independently including cutting and bending to shappe as directed, drilling holes, notching for wire, flat iron fillet for securing wire mesh etc complete all as specified and directed.

M & L Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. NOTE: Each line wire to be measured.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description exc 10 cm girth or width all as specified and directed.

Surface excavation not exc 30 cm deep and avg 15 cm in deep & getting out in soft soil complete all as specified and as directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for foundation and getting out in hard/dense soil complete all as specified and directed.

M & L RCC M-30 using 20 mm graded aggregate as in foundation, footing plinth beams etc. complete all as specified and as directed.

M & L RCC M-30 using 20 mm graded aggregate as in column, pier, struts, beams etc. complete all as specified and as directed.

M & L RCC M-30 using 20 mm graded aggregate as in slabs supported on wall complete all as specified and as directed.

M & L RCC M-30 using 20 mm graded aggregate as in chajjas complete all as specified and as directed.

M & L Form work to sides & soffits of floor or roof beams etc rough finished surfaces complete all as specified and as directed.

M & L Form work to chajjas etc rough finished surfaces complete all as specified and as directed.

M & L Form work to soffits of suspended slab such as roof slab, floor slab etc. not exceeding 200 mm thick fair finished complete all as specified and as directed.

M & L Form work to edges of concrete slabs, not exc. 20 cm wide and fair finished complete all as specified and as directed.

M & L Form work to sides of column etc rough finished surfaces complete all as specified and as directed.

M & L Form work to sides of concrete foundations, footings, bases of column etc vertical or batter rough finished surfaces complete all as specified and as directed.

S & F mild steel TMT bars 10 mm dia & above cut to length, bent to shape required including cranking, bending etc TMT bars complete all as specified and as directed.

All as per item No 19.00 above but 5 mm dia and over upto and including 10 mm dia in stirrups complete all as specified and as directed.

M & L Precast cement concrete block (type C, 1:3:6) masonary with solid blocks, exc. 10 cm in width and setting in CM (1:6) complete all as specified and as directed.

M & L for Precast cement concrete block (type C, 1:3:6) masonary with solid blocks, not exc.10 cm in width and setting in CM (1:4) complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in harde/dense soil complete all as specified and as directed.

Removing excavated material not exc 100 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

Filling under floor with moorum / red bajri in floor laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M & L for hardcore of broken stone or boulders of gauge not exc. 63 mm and deposited, spread and levelled in layers not exc. 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

M & L for cement concrete sub base 75 mm thick type C2 1:3:6 (20 mm graded aggregate) complete all as specified and as directed.

M & L for screed bed or bedding layers of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M & L for rendering as in backing coat for tiles in vertical surfaces in cement mortar (1:4) 10 mm thick all as specified and directed.

M & L for vitrified ceramic coloured tiles 600 x 600 x 10 mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed. NOTE: The colour of tiles shall be approved by Engr-in-Charge.

All as per item No 30.00 above but in vertical surfaces.

M & L for non-skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface for skirting set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M & L for rendering 15 mm thick in CM 1:6 on fair faces of concrete surfaces and rendering is to be finished smooth and even without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick (10 mm + 5 mm) in two layers using WPC on block masonary surfaces in CM 1:4, finished even and smooth (without using extra cement) complete all as specified and as directed. NOTE: WPC shall be measured and paid saperately.

Supply only water proofing compound all as specified and directed.

M & L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming on wall surfaces complete all as specified and as directed.

M & L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint over a coat of self primer on wall surfaces complete all as specified and as directed.

S & F anodised aluminium frame for door/windows, ventilators and partition works with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

S & F anodised aluminium door shutters, sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleat, glazing clips, rubber packing, anodised aluminium snap beading screws etc complete all as specified and directed.

S & F anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleat, glazing clips, rubber packing, anodised aluminium snap beading screws etc complete all as specified and directed.

S & F solid PVC Door frame of size 50 mm X 47 mm made out of 5 mm single side prelam PVC sheet/ wood grain printed PVC sheet reinforced with MS tube all as specified and directed.

S & F factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design 2 mm thick/ Moulded Prelam PVC sheet/ 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2 mm prelam PVC sheet on back face all as specified and directed.

S & F butt hinges 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised, type B-21 all as specified.

S & F aluminium anodised barrel tower bolts of extruded section 150 mm long all as specified.

S & F extruded aluminium alloy handles, fabricated type anodised size of handle in 150 mm complete all as specified and as directed.

S & F aluminium alloy, anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

M & L for 4.8 mm thick sheet glass, ordinary quality fixed to aluminum frame work and glazing with suitable size aluminum anodised beading exc 0.5 Sqm in each pane all as specified and directed.

S & F prelaminated particle board 12 mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinets/shutters fixed with screws to timber framework as in repairs all as specified and directed.

S & F wash basin white colour, flat back size type of size 50 x 40 x 83.5 cm with oval type including brackets, flush pipe, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed. MAKE: Hindware (Itallian collection) Cat No 10091 & 11003 or as approved by GE.

S & F 10 ltrs capacity PVC valveless syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed.

S & F vitreous china wash down water closet pan (pedestal pattern) white plastic water closet seat & back with flat bottom and cover, mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete all as specified and directed.

S & F towel ring all as specified and directed by Engr-in-Charge.

S & F towel rail all as specified and directed by Engr-in-Charge.

S & F cromium plated angle stop valves of 15 mm bore, with adjustable wall flange complete all as specified and as directed. MAKE: Hilife / ESS / Czar or as approved by GE.

S & F bib tap with wall flange 15 mm bore with fancy type complete all as specified and as directed. MAKE: Hilife / ESS / Czar or as approved by GE.

S & F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed

S & F 32 mm dia stainless steel bottle trap PTMT having minimum water seal 25 mm (minimum wt 260 gm) all as specified and directed.

S & F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20 mm bore pipe and fixed (Minimum weight 142 gms) all as specified and directed.

S & F Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe 20 mm bore and fixed complete all as specified and as directed.

M & L hoisting and fixing in position 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) all as specified and directed.

S & F brass chromium plated shower arms 15 mm dia, 190 mm long all as specified and directed.

S & F brass chromium Plated Health faucet with spring pipe all as speified and as directed.

S & F stop valves, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) for iron pipe of 15 mm bore all as specified and as directed.

S & F grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed.

S & F 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

M & L for PVC (SWR) gully trap 125 / 110 mm setting and jointing with solvent cement complete all as specified and directed

S & F 75 mm dia PVC (SWR) floor trap plain, with grating including jointing with solvent cement all as specified and directed

S & F tubing 15 mm bore medium grade, PVC, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S & F 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

M & L for PVC (SWR) 75 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed.

M & L for PVC (SWR) 110 mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed.

S & F PVC (SWR) bends for 110 mm bore any radius complete all as specified and as directed.

S & F PVC (SWR) junction single T equal or unequal for 110 mm bore complete all as specified and as directed.

S & F PVC (SWR) vent cowl for 100 mm bore complete all as specified and as directed.

M & L for cement concrete for plinth protection type C-2 1:3:6 (40 mm graded aggregate) 75mm thick complete all as specified and as directed.

M & L for sand cushioning / filling under floors not exc 15 cm thick for laying interlocking tiles all as specified and directed.

M & L for machine pressed precast concrete interlocking paver blocks any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 grade with gray cement and pigment complete all as specified and as directed.

M & L for rendering 10 mm thick in CM 1:4 on fair faces of concrete/brick work surfaces finished fair and even without using extra cement and using water proffing compound on roof top surfaces complete all as specified and directed.

M & L for water proofing treatment by applying oil bound bitumen primer, having a density of 0.87 - 0.89 Kg/lit, @ 0.40 ltrs/Sqm, providing and laying APP modified water proofing membrane weighting not less than 3.50 Kg/Sqm of approved make including minimum 10 cm side lap and 15 cm end lap, laid and pasted with blue flame torching applications and finally finishing with solar reflective bituminous aluminium paint @ 0.1.Kg/Sqm complete all as specified and directed.

S & F aluminium grill of size 100 mm (deco grill-104) complete all as specified and directed.

S & F floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring and vulcanised rubber piece fixed in floor, overall length of cover plate 140 mm complete all as specified and directed.

S & F aluminium body, door closer, hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

M & L for rendering 5 mm thick on fair faces of concrete surfaces finished with CM 1:3 even and smooth without using extra cement as in ceiling surfaces complete all as specified and as directed.

Supply, install hi wall Split AC indoor/ outdoor complete with cordless remote control unit & with in-built air ioniser and plasma filter for better indoor air quality with minimum five star rating, 1.5 TR capacity, outdoor unit stand/support, indoor unit stand, indoor to outdoor cabling all as per OEM complete all as specified and as directed by Engineer in charge. MAKE: Blue Star Cat No. 5CNHW18PAFU or equivalent in DAIKIN, CARRIER

S & F voltage stabalizer for automatic operation , single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabalized at 230V with accurtacy of +( -) 2.5% and of capacity 4 KVA complete all as specified and as directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB single pole 240 volts 20 Amps complete all as specified and as directed.

M & L for point wiring surface type with stranded aluminium cable 4.0 sqmm 1100 V grade PVC Insulated FR grade cables, ISI marked drawn through and including sutable size PVC casing and caping of suitable size fixed to surface including continuous copper earth wire 1.5 sqmm PVC insulated cable connected to common earth dolly all as specified and directed by Engineer in charge.

M & L for point wiring surface type with stranded aluminium cable 1.5 sqmm 1100 V grade PVC Insulated FR grade cables, ISI marked drawn through and including sutable size PVC casing and caping of suitable size fixed to surface including continuous copper earth wire 1.5 sqmm PVC insulated cable connected to common earth dolly all as specified and directed by Engineer in charge for following :

(a) One light/fan point controlled by one switch.

(b) One 3 pin socket outlet 6 Amp on same board with other switches.

(c) One 5 pin socket outlet 5 Amp on independent board.

All as per item No. 90.00 above but with 4.0 sqmm copper conductor on independent board for 3 pin 15 amps light point.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out in soft / loose soil for laying/taking out GI pipe line all as specified and directed.

Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed.

Supply, laying, jointing, testing and commissioning of LT underground XLPE cable insulated screened PVC bedded, galavanised steel strip or wire armoured heavy duty electric cable with stranded aluminium conductor of size 4 core 10 sqmm , 1100 Volts grade conforming to IS-7098 (Part-I) of 1988 laid in trenches/ wall/ floors/ ducts etc fixed with saddle and clamps or passing through pipes including provision of new lugs, glands etc complete all as specified and directed. NOTE: Excavation, earth work, PCC cover, joints and GI pipe shall be measured and paid for seperately under respective items of this Sch.

M & L for supply and lay un-reinforced pre-cast concrete cable covers, class LV, type 1, flat, size 250 x 150 x 40 mm in replacement of burnt bricks used as cable protection covers complete all as specified and directed.

S & F switch piano flush button, 5 Amps, 240 volts, single pole one way complete all as specified and directed by Engr-in-Charge.

S & F MCB DB SPN 240 volt 8 way double door powder coated sheet steel enclosure for surface mounting fitted with 200 Amps bus bar and din channel complete all as directed.

S & F MCB SPN, 40 Amps, 230 Volts, Single phase, 10 KA capacity all as specified and directed. MAKE: Havells Cat No DNMGCSNF040 or equivalent as apprived by GE.

S & F MCB SP, 5 to 30 Amps, 230 Volts, Single phase, 10 KA capacity all as specified and directed.

S & F exhaust fan of size 300 mm sweep, metal body including electric connection from ceiling rose to connector with flexible cord twin core twistd copper of size 23/0.0076 and testing surface/ wall cutting, preparation and finishing complete all as specified and directed.

S & F 5 star rated ceiling fan of 1200 mm sweep including electric connection from ceiling rose to connector with flexible cord twin core core twisted copper of size 23/0.076 and testing all as specified and directed.

S & F LED tubelight fitting 18 watt complete all as specified and as directed.

Ms V. S. NAYAK

sohan construction

ABDUL RAHIM

S M Shetty

M/S KVG CONSTRUCTIONS

M/S VERNEKAR AGENCIES

sanjay prabhu

Bidder Name

ABDUL RAHIM

Ms V. S. NAYAK

sanjay prabhu

sohan construction

M/S KVG CONSTRUCTIONS

M/S VERNEKAR AGENCIES

S M Shetty

D.K. ENTERPRISES