Supply of equipments for Mechanical Department

Supply of equipments for Mechanical Department : [FILE NO :474/A4/2025]

4-STROKE DIESEL ENGINE WITH MECHANICAL LOADING ENGINE : 5 HP DIESEL ENGINE No of Cylinders: 1 Bore x Stroke : 80 x 110mm Cubic Capacity : 0.553 Liters Compression ratio : 16.5:1 Rated Output : 3.7 KW (5HP) Torque at full load : 0.024 KN-m (2.387 kg-m) Crankshaft Center Height : 203 mm Specific Fuel Consumption : 185 + 5% gm / hp-hr Lub oil Consumption : 0.8 % of SFC 5 HP at 1500rpm coupled with Rope Brake Dynamometer loading device on a common base plate arrangements PANEL BOARD ARRANGEMENTS Burette arrangements is used to measure the fuel consumption , U tube manometer for air intake measurement, Proximity sensor and RPM Meter is used to measure the Speed , Digital temperature Indicators, K Type Thermocouple arrangements. AIR INTAKE MEASUREMENT Consist of an air tank mounted on an iron stand fitted with a suitable orifice plate. COOLING WATER Consist of Suitable inlet and outlet piping with flow control Valve.Water to Measure the Rate of flow of cooling water and digital Thermometers with pocket connection for measuring inlet and outlet.Water temperature with Water flow meter and stop watch

COMPRESSOR TEST RIG Air compressor test Rig set up for conducting volumetric efficiency test: COMPRESSOR : No of Cylinder : Two No of Stages : Two Displacement : 300 LPM Working pressure : 10 kg / cm^2 Storage tank : 160 Liters Air reservoir : 160 Liters PANEL Energy meter for input power measurement , Starter, ‘U’ tube manometer . Air box with orifice for air Intake measurement MOTOR: 3 HP , A. C. 440 volts. Single / Three phase.