Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹4.9 L+₹30,765.63 (6.65%)Accepted-AOC | ₹4.9 L+₹30,765.63 (6.65%) | L2 | Accepted-AOC L1 |
| 2 | L1₹4.6 LRejected-Finance | ₹4.6 L | L1 | Rejected-Finance Not accepted. Variation beyond allowable limit |
| 3 | L3₹5.7 L+₹1.1 L (24.2%)Rejected-AOC | ₹5.7 L+₹1.1 L (24.2%) | L3 | Rejected-AOC L2 |
| 4 | L4₹5.9 L+₹1.2 L (26.7%)Rejected-AOC | ₹5.9 L+₹1.2 L (26.7%) | L4 | Rejected-AOC L3 |
Tender Value
₹5.5 L
EMD Value
₹11,000
Closing Date
26 Oct 2019, 1:00 pmClosed
Executive Engineer
O/o the Executive Engineer, Middle Brahmaputra Division, CWC, Adabari, Guwahati
Supply, fitting, fixing etc of Doors and Windows for Toilets, Rooms of Office, Guest House, Community Hall etc at CWC Complex, Adabari, Guwahati
2019_CWC_511896_1
6/7/Tender-MSD/MBD/2038-42 dt 16.10.19
Open Tender
Civil Works
Item Rate
90 days
Guwahati
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
Executive Engineer
₹11,000
Yes
2 Jan 2020
17 Oct 2019
28 Oct 2019
18 Oct 2019
26 Oct 2019
21 Oct 2019
19 Oct 2019 - 21 Oct 2019
Amount
Flush Door: Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevant I.S. Code including oxidized iron butt hinges (100mm x 75mm x 3.5mm ) 6 nos with necessary wood screws. b) Non Decorative type and block board core. (i) 35 mm thick.
Primer Paint: Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting. a)With ready mixed paint, wood primer (white)
Colour Paint: Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacturing (Asian Neolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (i) Surfaces over 100 mm in width or girth. (a) General Purpose (Asian paint/ Berger paint/ICI paint/J & N paint/ Nerolac)
FRP FLUSH DOOR Supplying & fixing of factory made 30mm thick Fiberglass Reinforced Plastic (FRP) paneled door shutter of required colour of FIBREWAYS made with fire retardant grade unsatured polyster resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels and conforming to IS:14856-2000 including fixing to frames complete as per direction of Engineer-in charge.
Tiles Work In Cup Boards :Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). (a) Normal range. Somany/ Orient/Nitco /Asian Make. i) Of size 200mmx200mm and above. i) Orient made
Cupboard Shutters: Providing, fitting and fixing coloured anodised aluminium framed double leaf glazed doors with anodised aluminium frame made of 100mm x 45mm x 2mm sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL/Other equivalent primary producer) with door styles of size 81mm x 45mm x 2mm, top rails 50mm x 45mm x 2mm, lock rails 81 mm x 45mm x 2mm,bottom rails 100mm x 45mm x 2mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the Department at all levels. (iv) Prelaminated Board
Aluminium Windows : Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL/Other equivalent primary producer) without horizontal glazing bars, joints mitered and welded (manufactured to relevant is specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. a) 2 Track sliding window. (ii)5mm frosted glass
Door Fittings: Supplying, fitting, fixing brass fittings of approved make, reasonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ).
a) Sliding door bolts. i) 300mm x 16mm
c) Door handles. iii) 150 mm
q) Cupboard locks. iv) 75mm
v) Door stopper with rubber stopper (including dysfunctional door stopper in Office Building )
Door Closer: Providing , fitting and fixing Door closer of various type UL listed and fire rated good quality depending on the door specification. Types like single speed, Double Speed, Heavy Duty etc are available and as directed & specified by the department. B) Fire Rated Door Closer-EN rated Godrej Make. b) Double speed Fire Rated Door Closer Model LKYGDC834
Vertical Blind: Supplying, fitting and fixing MAC blinds horizontal and vertical complete as specified and directed by the department at all levels. (A) Vertical blinds. (b) Blackout. iv) 50 mm
CHANDAN CHOWDHURY
S D ASSOCIATES
Redwood Planning and Construction Private Limited
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .