Ahilyanagar..AMC..Pump and motors

Amount

Dismantling & overhauling of Vertical Turbine pumps from the position having 10 mtrs. suspended length (from Bell Mount to Discharge Head.), cleaning, checking, aligning, assembling i.e., refitting, commissioning with trial run on no load & full load for at least 30 minutes including replacement of spare parts, fastners (which shall be made available by MIDC at free of cost at site of work) etc. complete as per site requirements.

10 H.P. to 60 HP.

61 H.P. to 200 H.P.

201 H.P. to 300H.P.

301 HP to 300 HP

Fabrication of spares for the pumping machinery suitable to match with the existing fitments & as per actual site conditions including cost of material, salvage, machining, labour, taxes & duties, incidentals, overheads, packing & forwarding etc. complete as per designation given below.

Axle or Shaft - Stainless Steel -304 or 410

Threaded Sleeves SS - 304 or 410

Plain/ Collared Bush SS -3316

Plain/ Collared Bush...Gun Metal

Plain / collared Bush....Neoprene rubber

Check / Lock nut.... SS - 304 or 410

Threaded coupling...SS - 316

Supplying of High tensile Nut bolts required for jointing column pipes with washer as per sample complete.

Supplying of Rubber packing 1.50 mm , 3.0 mm & 6.0 mm et complete

Providing, supplying & erecting mechanical seal motor side suitable for 50 HP submerged submersible pump of Aqua make

Providing, supplying & erecting mechanical seal pump side suitable for 50 HP submerged submersible pump of Aqua make

Providing, supplying & erecting 'O' ring set suitable for 50 HP submerged submersible pump of Aqua make

Servicing and overhauling of motors, including removing from location, dismantling cleaning the winding, drying, applying, varnish, baking, changing the bearing if necessary (bearing will be supplied by MIDC) greasing the bearing, assembling, and giving satisfactory trials on No load and full load etc.

a) 415 volts, 3 phase upto 5 HP

b) 415 volts, 3 phase upto 25 HP to 35 HP

c) 415 volts, 3 phase upto 36 HP to100 HP

D) 415 volts, 3 phase upto 125 HP to 200 HP

e) 415 volts, 3 phase upto 225 HP to 300 HP

f) 415 volts, 3 phase upto 300 HP to 400 HP

G) 415 volts, 3 phase upto 400 HP to 600 HP

Rewinding and repairs of Squirrel cage induction motors, 440 V, 3 phase, 50 cycles/sec. 1500 RPM with B class insulation including baking, varnishing, painting etc. (The scrap of winding material shall be retained by rewinder.)

50 HP Submersible pump motor

Rewinding of submersible pump motor of all types and makes upto 15 HP with coated copper wires and overhauling with minor repairs, testing for the original speed, HP and no load consumption and guarantee for one year. (The scrap of winding material shall be retained by rewinder.)

Rewinding of electric motor upto 5 Number H.P. three phase upto 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, replacing ball bearing, bush bearing, screws etc. testing for the original speed and no load consumption with guarantee for one year

Supply of terminal connection plate for various capacity motor of suitable size as per sample

300 HP Motor

150 HP Motor

60 HP Motor

25 HP Motor

400 HP Motor

600 HP Motor

Overhauling & Servicing of monorail/trolly electrically operated overhead cranes with oiling, greasing, adjustment & alignment of breakshoes, electomagnetic switches, pendant instrument clusters, longitudinal; cross & vercal travels, ON/OFF i.e., start/ stop mechanism, wire ropes, chain pulley blocks, slings, safety & or non reverse rachets, antifriction arrangements etc. complete with issuance of test certificates as required by annual inspecting relevant authorities.

FOR 5 M.T. capacity

above 7.5 M.T. to 12.5 M.T. capacity

at WTP 7.5 MT Crane

Supply of bearing oil of apporved quality

Supply of approved quality bearing grease

RAJLAXMI ELECTRICAL (BID ID -6643390)