Construction of 600000 Lire OHT at Ponnakani H/o Bogampatti Panchayat

Amount

Earth work excavation and depositing on bank with in initial lead lift in HBG soil for foundation etc. complete.

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyance of all materials to site and labour charges etc. complete.

Supplying and erecting shttering including necessary support for plane surface in foundation Basement and Roof labs strutting height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations

Plane Surface

Below ground level upto 3.30m

Above ground level upto 3.30m

Plane 3.31m to 4.30m

Above ground level 6.31m to 7.30m

Curved Surface

Curved surface 0 to 3.30

Curved surface 3.31 to 4.30

Curved surface 6.31 to 7.30

Curved surface 7.31 to 8.30

Square column

Square Column Below GL and Above GL 0.00 to 3.30

Square Column Above GL 3.31 to 4.30

Square Column Above GL 4.31 to 5.30

Square Column Above GL 5.31 to 6.30

Square Column Above GL 6.31 to 7.30

Supplying, fabricating and placing in position mild steel or ribbed to steel and all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete.

Reinforced Cement concrete 1:1½:3 (One of cement, one and a half of sand and three of hard broken granite stones ) using 20mm gauge hard broken granite stones for all reinforced cement concrete works excluding the cost and fabrication of reinforcement grills in position, shuttering, centering but including laying, vibrating, curing, finishing and providing Mild steel fan hooks in the RCC slab wherever necessary as directed by the departmental officers etc., complete in all respects

1.50m to 4.50m below ground level

0.00m to 1.50m below ground level

0.00m to 4.50m above ground level

4.51m to 7.32m above ground level

7.33m to 10.98 above ground level

Painting two coats with Interior Emulsion & Exterior Emulsion using best quality of Emulsion, Brushs, scaffolding charges etc. complete

Fabrication, supply, delivery and fixing of outside MS ladder wide 45cm made out of 50×50×6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm centre to centre welded, jointed etc., providing with suitable side supports, clamps, and locking arrangements provided with one coat of red oxide paint to for providing access to roof top of 60,000 lit.OHT of suitable inclined length, including bottom anchorage and transportation and as directed by departmental officers.

Providing and fixing of RCC inner access ladder in RCC 1:1½:3 (one cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centring, shuttering charges, mixing concrete curing etc., to required height and clear width of 45cm consisting of two Nos. of vertical post of 10cm×15cm and step slab of 25mm×25mm etc., complete and as directed by the departmental officers.

Providing PVC ventilating arrangements mosquito proof nylon net with 110mm PVC cowl and as directed by the departmental officers.

Supplying, fabricating and fixing in position factory made Stainless Steel Flush Door Shutter 35mm thick using SS 304 Grade 1.6 mm thick, Stainless Sheets on both sides (Equivalent to IS 6911-04 Cr. 19, Ni 9) minimum 8-8.5% nickel and 18% chromium sourced from original stainless steel manufacturer with view panel size 30mm x 45mm made up of 6mm thick clear toughened glass fitted with double side adhesive tape and finished with dowconing silicon sealant, floor spring for each shutter, consealed tower bolt, suitable stainless steel locking arrangement and other necessary furniture fittings of approved quality. The vertical styles and other frame members and cross stiffeners shall be of same quality stainless steel box section of suitable size and thickness with proper core material as prescribed by the Departmental Officers Manhole Cover SFRC

Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for liftin, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc., complete as detailed below.

65mm dia GI pipes

65mm dia GI Coupler

65mm dia GI Elbow

65mm dia GM Gate valve

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

G Palanisamy (BID ID -1173373)