Construction of Community Sanitary Complex for Girls at Vannarapatty PUM School in Vannarapatty Panchayat (Type-3)

Amount

Construction of Community Sanitary Complex for Girls at Vannarapatty PUM School in Vannarapatty Panchayat (Type-3)

Earth work excavation and depositing on bank with initial lead and lift in cll clauses of soils such as as per S.S.20B for narrow foundation etc. complete.

Filling with M.Sand including cost and conveyance of all materials to site and all labour charges etc., complete.

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete.

Brick work with Cement Mortar 1:5 Mix using Country Bricks including cost and conveyance of all materials to site and all labour charges etc., complete.

Supplying and errecting Centering for sides and soffixs of all RCC works including cost and conveyance of all materials to site and all labour charges etc., complete. Below Sill

Supplying and errecting Centering for sides and soffixs of all RCC works including cost and conveyance of all materials to site and all labour charges etc., complete. Above Sill

Cost and supply of steel with fabrication charges including cost of steel and binding wire complete with standard specification etc., complete

R.C.C. 1:1½:3 mix using 20mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges etc., complete.

Supplying, Fabricating, Erecting and fixing of UV coated Poly Carbonite sheet tubuar box section of 100 x 50 x 3mm of 1 meter interval including priming coat fixing in position with all necessary accessories completee complying with standard specification and as directed by the departmental officers.

Supplying, Fabricating erecting and fixing of Stainless Steel including alll charges etc., complete

Supplying, Fabricating erecting structural steel works including all charges etc., complete

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Paving the Top of roof with Solar reflective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three M.Sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete

Plastering with cement mortor 1:5 mix to 12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete

Supply and fixing of Door including cost and conveyance of all materials and all labour charges etc., complete.

Steel Door

Steel Door

Distembering two coats including cost of lime blue powder, fevicol type gums, brushes, scaffolding charges etc., complete with standard specification.

Emulsion Painting including cost of lime blue powder, fevicol type gums, brushes, scaffolding charges etc., complete with standard specification.

Painting in two coats using ready mixed enamel paint including all cost and labour charges etc., complete

Supply, delivery and fixing of HDPE Tank with ISI marking (2000 liter capacity) including transportation, fixing etc., complete

Provision for supply and fixing of Indian Water Closet

Supplying and fixing in positon Indian make white glazed earthern ware squatting type urinal of best quality and approved make including dismantling masonry, if necessary nad re-doing the same tomoriginla condition, etc., complying with standard specifications . (The squatting type urinal should be got approved by the Executive Engineer before use on works).

Supply and fixing of 110mm dia Pipe for Sanitary Arrangeents etc.,

110mm dia PVC Pipe

110mm dia PVC Door bend

110mm dia PVC Tee

25mm dia PVC Pipe

Brick jelly 40mm size for filling soak pit inner etc., complete complying with standard specifiction.

Provision for Supply and fixing of RCC Rings for Leach Pit including all labour charges etc., complete

Provision for Supply and fixing of RCC Cover slab including all labour charges etc., complete

Provision for Supply and fixing of RCC Rings for Soak Pit including all labour charges etc., complete

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 25

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 38

Supply and fixing of single box type Compact flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of CFL Light [SD 88 ]

Supply and run of 2 of 1.50 Sq.mm polythene insulated PVC sheathed heavy duty SC Copper conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD No.64)

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 1 & 40 of Section 2 of Instruction to Bidders (ITB) of SBD)

SUBRAM (BID ID -1355783)