C/o Balance work of link road kanwali to Dhiman Basti and SC Basti Uperli kanwali. (0/00 to 0/800) including Retaining wall along khad and Slab culverts.

Amount

Cutting in earth work and disposal of excavated earth upto a lead of 20 meters

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade & camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading i ( 90 mmto 63 mm) (By mechanical means) as per Technical Specification Clause 404. including carriage of materials in all leads and lifts including mechanical means.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 (By mechanical means) as per Technical Specification Clause 404. including carriage of materials in all leads and lifts including mechanical means.

Providing and applying priming coat with Bitumen emulsion ( SS- 1 ) on prepaired surface of granular base including cleaning og road surface and spraying primer at the rate of 0.70-1.0 kg /sqm. using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion ( RS- 1 ) uasing emulsion distributor at the rate of 0.20-0.25 kg /sqm. on the prepaired bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 305.1 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Providing and laying cement concrete 1:4:8 (1 cement :4sand :8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centering and shuttering in foundation and plinth

Providing and laying plain / reinforced concrete in open foundations complete as per drawing and technical specification clause 802 ;803; 1202 and 1203 P.C.C. grade-M-10 (i) Nominal mix 1:3:6 including the cost of centering and shuttering in open foundation.

Providing and laying plain / reinforced concrete in open foundations complete as per drawing and technical specification clause 802 ;803; 1202 and 1203 P.C.C. grade-M-15 (i) Nominal mix 1:2.5:5 including the cost of centering and shuttering in open foundation.

Providing concrete for plain/rainforced concrete in open fondations complete as per drawings and technical specificationbs clause 802, 803, 1202 & 1203. III. P.C.C. grade M 20 including cost of form work ,centerring, shuttering etc. (i) Nominal mix (1:2:4)

Providind and laying cement concrete 1:1.5:3 with mechanically mixed and viberated having size of course aggregate 20 mm and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundation,footing bases of columns and the like and mass concrete

Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete up to floor two level :- TMT steel.

Providing weep holes in brick masonary/stone masonary, plain/ reinforced concrete abutment , wing wall, return wall, with 100mm dia PVC pipe extending through the full width of the structures with slope of 1(V) 20 (H) towards drawings face complete as per drawing and technical specifications clauses 614,709,1204.3.7

Back filling behind abutment , wing wall and return wall complete as per drawings and Technical specification Clause 1204.3 .8

Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1108. 900 mm dia

Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1108. 300mm dia

Providing and laying 50mm Thick Dense bituminous macadam with 100-120 TPH batch type hot mix plant prodcucing an average out put of 75 tonn per hour using 4.50 percent of hot and filler , transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade level and alingment rolling with smooth wheeled , vibratory and tandem roller to achieve the desired compaction as MORTH specification Clause No. 509 complete in all respects.

Providing and laying 40mm thick bituminous concrete with 100-120 TPH batch type hot mix plant producing an average out put of 75 tonnes per hour using crushed aggregate of specified grading,premixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler , transporting the hot mix to work site , laying with a hydrostatic paver finisher with sensor control to the required grade, level and alingment , rolling with smooth wheeled vibratory and tandem rollers to achive the desired compaction as per MORTH specification clause no. 509 complete in all respects.

Lovedeep singh

lakhwinder thakur govt. contractor