PROVN OF APPROACH PATH ALONGWITH STORM WATER DRAIN STREET LIGHTS AND ADDN ALTN AND SPECIAL REPAIRS TO BLDG NO T-7 AT NAVAL ANALYSIS UNIT AND PROVN OF GALVALUME SHED NEAR OOD ROOM AND GUARD ROOM WITH PCC HARD STANDING AT INS VAJRAKOSH NAVAL BASE KAR

Amount

M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface.

M&L for 100 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing.

M&L for Sand filling under floors or in foundations including watering and consolidation tickness 50mm complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Gradecomplete all as specified and directed.

M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in kerb stone etc including necessary from work and setting in CM (1:4) complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed.

Removing excavated materials n exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L for 100mm thick cement concrete type B-2 1:2:4 (40mm graded aggregate ) finishing cement concrete surface even and smooth using extra cement all as directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation & filling in Mass concrete complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B2 using 40mm graded stone aggregate as in foundation & filling in Mass concrete complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed by Engr-in-Charge.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls as rain water pipes all as specified and directed.

S&F 110mm dia PVC (SWR) bends all as specified and directed.

M&L for Pre-cast cement concrete block type C1 , 1:3:6 (using 20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified.

Rendering 15mm thk with cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement

M & L for applying two coats of cement based paint over a coat of primer including preparation of new plastered surfaces and as directed.

Dismantling of 6mm thick asbestos cement (corrugated or semi corrugated etc) sheets incl ridges in roof coverings complete all as specified and directed.

Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation board/slabs/ blankets, any thickness, including cover fillets.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L Providing cement concrete 1:3:6 Type B 1 (using 20 mm graded aggregate) in copings, and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

S&F wind ties for roof including securing bolts, and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as per manufacuters specification.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description exc 10cm in width or girth complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F aluminium anodised snap grid frame work for false ceiling size 605 x 605mm all as specified.

M&L 12mm thick perforated particle board/tiles for insulation and accoustic purposes, 60x60 cm in size, fixed to ceiling with nails to timber frame work or with staples on snap grid as directed. (Rate = 537.06 + 78.26 = 615.32)

S & F for powder coated aluminium frame for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading screws etc. complete all as specified and directed.

S&F prelaminated particle board 12 mm thick interior grade, prelaminated both side with decorative choice lamination as in kitchen cabinets/shutters fixed with screws in aluminium frame work complete all as specified & directed.

S&F Aluminium body, door closer, hydraulically regulated designation No.3,universal type,suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F in Mortice locks Brass vertical type size 100mm 4 levers brass chromium plated with keys in duplicate all as specified and directed.

S&F extruded aluminum alloy handles, fabricated type 150mm size all as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200mm long all as specifed and directed.

S&F butt hinges 125mm size, extruded aluminium alloy with galvanised mild steel hinge pin anodised, type B-21 complete all as specified and directed.

Roughning surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

Brushing neat cement slurry with 3.0 kg of cement per sq. meter all complete as specified and directed.

M&L for Vitrified ceramic tiles of premium quality, light shade, 10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 Sq.m (size 600 x 600 mm), laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified.

M&L for vitrified coloured tiles of 600x 600 x 10-12 mm thick as in skirting set and jointed in neat cement slurry and pointed in colour cement over 10 mm thick rendering in cement mortar 1:3 including taking down old wall dado/finishes of any description, complete all as specified and directed.

sohan construction

M/S DK Enterprises

ABDUL RAHIM

Bidder Name

ABDUL RAHIM

Ms V. S. NAYAK

sohan construction

M/S DK Enterprises