Construction for Facelifting-Civil Renovation of Power Grid Corporation of India Ltd. Office, Regional Office building situated at OB-26, Grid Bhawan, Rail Head Complex, Jammu, UT of JK

AMOUNT (NON- Total AMOUNT

S. NO. DESCRIPTION AMOUNT ( DSR )

DSR) (DSR+NON-DSR)

Multiplication factor for

@0.973 on DSR Items

Sub Total of Electrical, Fire

Fighting, HVAC, LV & Furniture

Digitally signed by Om Prakash

Construction for Facelifting/Civil Renovation of Power Grid Corporation of India Ltd. Office, Regional Office building

situated at OB-26, Grid Bhawan, Rail Head Complex, Jammu, UT of J&K

Sl No. Item No. Description Unit Qty Rate Amount

1 6.0 BRICK WORK

Brick work with common burnt clay F.P.S. (non

2 6.1 modular) bricks of class designation 7.5 in

foundation and plinth in:

3 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5.00 7132.25 ₹ 35,661.25

Brick work with common burnt clay F.P.S. (non

modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level

in all shapes and sizes in :

5 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 22.50 9105.95 ₹ 2,04,883.88

Half brick masonry with common burnt clay F.P.S.

6 6.13 (non modular) bricks of class designation 7.5 in ₹ 0.00

superstructure above plinth level up to floor V level.

7 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 50.00 1123.80 ₹ 56,190.00

Extra for providing and placing in position 2 Nos.

8 6.15 6mm dia. M.S. bars at every third course of half Sqm 50.00 104.80 ₹ 5,240.00

brick masonry (with F.P.S. bricks).

9 8.0 MARBLE & GRANITE WORK ₹ 0.00

Providing and fixing 18 mm thick gang saw cut,

mirror polished, premoulded and prepolished,

machine cut for kitchen platforms, vanity counters,

window sills, facias and similar locations of required

size,approved shade, colour and texture laid over

10 8.2 20 mm thick base cement mortar 1:4 (1 cement : 4 ₹ 0.00

coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups,

including rubbing, curing, moulding and polishing to

edges to give high gloss finish etc. complete at all

11 8.2.2 Granite stone slab colour black, Cherry/Ruby red ₹ 0.00

Providing edge moulding to 18 mm thick marble

stone counters, Vanities etc., including machine

14 8.3.2 polishing to edge to give high gloss finish etc. metre 65.81 510.95 ₹ 33,623.58

complete as per design approved by Engineer-in-

Charge. Granite work

Extra for providing opening of required size & shape

for wash basins/ kitchen sink in kitchen platform,

vanity counters and similar location in

marble/Granite/Stone work including necessary

holes for pillar taps etc. including rubbing and

polishing of cut edge etc. complete.

Providing and fixing machine cut, mirror/ eggshell

polished , Marble stone work for wall lining (veneer

work) including dado, skirting, risers of steps etc., in

required design and pattern wherever required,

stones of different finished surface texture, on 12

mm (average) thick cement mortar 1:3 (1 cement :

16 MRC-1 3 coarse sand) laid and jointed with white cement ₹ 0.00

slurry @ 3.3 kg/sqm including pointing with white

cement slurry admixed with pigment of matching

shade, including rubbing, curing, polishing etc. all

complete as per Architectural drawings, and as

directed by the Engineer-in-Charge.(Base rate OF

Marble- INR 8000 RS/SQmt)

18 mm thick Italian Marble stone slab,Perlato,

Fire Red or Dark Emperadore or any other variety

as per approval of the EIC.

1 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing stone slab with table rubbed,

edges rounded and polished, of size 75x50 cm

deep and 1.8 cm thick, fixed in urinal partitions by

cutting a chase of appropriate width with chase

cutter and embedding the stone in the chase with

epoxy grout or with cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate

6 mm nominal size)

as per direction of Engineer-in-charge and finished

19 8.10.2 Granite Stone of approved shade Sqm 5.00 4051.85 ₹ 20,259.25

Designing, fabricating, testing, installing and fixing

in position Curtain Wall with Aluminium Composite

Panel Cladding, with open grooves for linear as well

as curvilinear portions of the building , for all heights

and all levels etc. including : (a) Structural analysis

& design and preparation of shop drawings for

pressure equalisation or rain screen principle as

required, proper drainage of water to make it

watertight including checking of all the structural

and functional design. (b) Providing, fabricating and

supplying and fixing panels of aluminium composite

20 8.32 panel cladding in pan shape in metalic colour of ₹ 0.00

approved shades made out of 4 mm thick

aluminium composite panel material consisting of 3

mm thick FR grade mineral core sandwiched

between two Aluminium sheets (each 0.5 mm

thick). The aluminium composite panel cladding

sheet shall be coil coated, with Kynar 500 based

Lumiflon based fluoropolymer resin coating of

approved colour and shade on face # 1 and

polymer (Service) coating on face # 2 as specified

using stainless steel screws, nuts, bolts, washers,

fasteningsilicone sealant,

brackets backer rods

of Aluminium alloyetc.

T5 / MS with Hot Dip Galvanised with serrations

and serrated washers to arrest the wind load

movement, fasteners, SS 316 Pins and anchor

bolts of approved make in SS 316, Nylon

separators to prevent bi-metallic contacts all

complete required to perform as per specification

and drawing The item includes cost of all material &

labour component, the cost of all mock ups at site,

cost of all samples of the individual components for

in an approved laboratory, field tests on the

assembled working curtain wall with aluminium

composite panel cladding, cleaning and protection

of the curtain wall with aluminium composite panel

21 cladding till the handing over of the building for Sqm 50.00 5015.05 ₹ 2,50,752.50

occupation. Base frame work for ACP cladding is

payable under the relevant aluminium items. The

Contractor shall

provide curtain wall with aluminium composite panel

cladding, having all the performance characteristics

all complete , as per the Architectural drawings, as

per item description, as specified, as per the

approved shop drawings and as directed by the

Engineer-in-Charge. However, for the purpose of

payment, only the actual area on the external face

curtain wall with Aluminum Composite Panel

Cladding (including width of groove) shall be

measured in sqm. up to two decimal places.

22 9.0 WOOD & PVC WORK ₹ 0.00

2 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing wood work in frames of doors, windows,

clerestory windows and other frames, wrought

framed and fixed in position with hold fast lugs or

with dash fasteners of required dia & length (hold

fast lugs or dash fastener shall be paid for

24 9.1.1 Second class teak wood Cum 1.67 142949.70 ₹ 2,38,338.69

Providing and fixing ISI marked flush door shutters

conforming to IS : 2202 (Part I) non-decorative type,

core of block board construction with frame of 1st

class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and

face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel

butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood

battens 25 mm minimum depth on all edges of flush

door shutters (over all area of door shutter to be

Providing and fixing wooden moulded beading to

28 9.40 door and window frames with iron screws, plugs ₹ 0.00

and priming coat on unexposed surface etc.

29 9.40.1 2nd class teak wood ₹ 0.00

Providing and fixing M.S. grills of required pattern in

frames of windows etc. with M.S. flats, square or

round bars etc. including priming coat with

approved steel primer all complete.

32 9.48.1 Fixed to steel windows by welding kg 3626.25 219.10 ₹ 7,94,511.38

Providing 40x5 mm flat iron hold fast 400 mm long

including fixing to frame with 10 mm diameter bolts,

nuts and wooden plugs and embedding in cement

concrete block 300x100x150 mm 1:3:6 mix (1

cement : 3 coarse sand : 6 graded stone aggregate

20 mm nominal size).

Providing & Fixing decorative high pressure

laminated sheet of plain / wood grain in gloss / matt

/ suede finish with high density protective surface

layer and reverse side of adhesive bonding quality

conforming to IS : 2046 Type S, including cost of

adhesive of approved quality.

36 SS Hardware ₹ 0.00

Providing and fixing bright /matt finished Stainless

37 9.165 Steel handles of approved quality & make with ₹ 0.00

necessary screws etc all complete.

39 Hardware ₹ 0.00

Providing and fixing approved brand and

manufacture of Stainless Steel Tower bolt 300 mm

long with 10 mm dia along with necessary

accessories and screws etc. complete in all

respects as per manufacture specificatios & as

directed by Engineer-in-charge.

Providing and approved brand and manufacture of

Stainless Steel Door stopper of approved make -

Door Mounted Hanging Type SS Satin Finish along

with necessary accessories and screws etc.

complete in all respects as per manufacture

specificatios & as directed by Engineer-in-charge.

3 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing approved brand and

manufacture of Stainless Steel Door Buffer wall

mounted 22 mm dia,75 mm long (DB (22) along

with necessary accessories and screws etc.

complete in all respects as per manufacture ofrs'

specificatios & as directed by Engineer-in-charge.

Providing and fixing Sliding bolt (baby latch) with SS

lock strip 5'' (BL(B)) along with necessary

43 MRC-5 accessories and screws etc. complete in all Each 13.00 398.78 ₹ 5,184.17

respects as per manufacture ofrs' specificatios & as

directed by Engineer-in-charge.

Providing and fixing approved brand and

manufacture of Surface Mounted with slide rail K

(Symmetric) Mechanism Door Closer of approved

make, Weight of door: 40-80 Kg, Width of door: 750-

950 mm, Tested & Certified 500000 cycles, Silver

Finish, Door closer power adjustment by change of

position from hinge line along with necessary

accessories and screws etc. complete in all

respects as per manufacture specificatios & as

directed by Engineer-in-charge.

45 Door Handles and Locks ₹ 0.00

Providing and fixing approved brand and

manufacture of SS 304 Solid die cast Mortice Lever

handle of approved make with 8 mm spindle, With

Restoring spring along with Steel base PVD

coating: 16 micron with necessary accessories and

screws etc. complete in all respects as per

manufacture ofrs' specificatios & as directed by

Engineer-in-charge.

Providing and fixing approved brand and

manufacture of Mortice Sash lock Lock type : PZ -

72 W (W = handle/knob execution), Backset :

55mm, Face plate: Stainless steel, Face plate

width: 24 mm / Hub: 8 mm, With closed lock case

47 MRC-8 with 3 - fold fastening, Lock case: zinc - plated, Each 10.00 1,196.09 ₹ 11,960.87

Shiftable latch bolt. Latch bolt can be shifted without

opening the lock case, with necessary accessories

and screws etc. complete in all respects as per

manufacture ofrs' specificatios & as directed by

Engineer-incharge.

Providing and fixing approved brand and

manufacture of Euro Profile Cylinder of approved

make with One side key and one side knob 60 mm,

48 MRC-9 for max door thickness - 40 mm - SS Finish along Each 24.00 1,167.26 ₹ 28,014.26

with necessary accessories and screws etc.

complete in all respects as per manufacture ofrs'

specificatios & as directed by Engineer-in-charge.

Providing and fixing fire resistant door frame of

section 50 x 60 mm on horizontal side & 35 x 60

mm on vertical sides having built in rebate made

out of 1.6 mm thick GI sheet ( Zinc coating not less

than 120gm/m²) suitable for mounting 120 min Fire

Rated Glazed Door Shutters. The frame shall be

filled with Mineral wool Insulation having density

min 96Kg/m³ . The frame will have a provision of

G.I. Anchor fastners 14 nos ( 5 each on vertical

style & 4 on horizontal style of size M10 x 80 )

suitable for fixing in the opening along with Factory

made Template for SS Ball Bearing Hinges of Size

100x89x3mm for fixing of fire rated glazed shutter .

The frame shall be finished with a approved fire

resistant primer or Powder coating of not less than

30 micron in desired shade as per the directions of

Engineer - in- charge . (Cost of SS ball bearing

hinges is excluded).

4 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing 60 mm thick glazed fire

resistant door shutters of 120 min Fire Rating

confirming to IS:3614 (Part II) or EN1634-1:1999,

tested and certified as per laboratory approved by

Engineer-in-charge, with suitable mounting on door

frame, consisting of vertical styles, top rail & side

rail 60 mm x 60 mm wide and bottom rail of 110 mm

x 60mm made out of 1.6mm thick G.I. sheet (zinc

coating not less than 120gm/m²) duly filled mineral

wool insulation having density min 96 kg/ m³ and

fixing with necessary stainless steel ball bearing

hinges of size 100x89x3mm of approved make,

including applying a coat of approved fire resistant

primer or powder coating not less than 30 micron

etc all complete as per direction of Engineer-in-

charge (panelling to be paid for seperately).

Providing and fixing glazing in fire resistant door

shutters, fixed panels & partitions etc., with G.I.

beading made out of 1.6 mm thick G.I. sheet (zinc

coating not less than 120 gm/m²) of size 20 x 33

mm screwed with M4 x 38 mm SS screws at

distance 75 mm from the edges and 150 mm c/c ,

including applying a coat of approved fire resistant

primer/powder coating of not less than 30 micron on

G.I. beading, & special ceramic tape of 5 x 20 mm

size etc complete in all respect as per NBC 2016,

IS 16231 (Part 3):2016 and as per direction of

Engineer-in-charge with glass of required thickness

having 120 minutes of fire resistance both integrity

& radiation control (EW120) and minimum 20

minutes of insulation (EI20). The manufacturer

have to give test report/certification of fire glass and

the glass should have the stamp showing the value

of E, EW & EI. The glass shall be tested in

approved NABL accredited lab or by any other

accreditation body which operates in accordance

with ISO/IEC 17011 and accredits labs as per

ISO/IEC 17025 for testing and calibration scopes

shall be eligible. The maximum glazing size shall

not be more than 1100x2200 mm (w x h) or 2.42

Providing and fixing panic bar / latch (Double point)

fitted with a single body, Trim Latch & Lock on back

52 9.139 side of the Panic Latch of reputed brand and Each 13.00 8366.15 ₹ 1,08,759.95

manufacture to be approved by the Engineer- in-

charge, all complete.

5 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing factory made single extruded

WPC (Wood Polymer Composite) solid

door/window/Clerestory windows & other Frames /

Chowkhat comprising of virgin PVC polymer of K

value 58-60 (Suspension Grade), calcium

carbonate and natural fibers (wood powder/ rice

husk/ wheat husk) and non toxic additives

(maximum toxicity index of 12 for 100 gms)

fabricated with miter joints after applying PVC

solvent cement and screwed with full body threaded

star headed SS screws having minimum frame

density of 750 kg/cum, screw withdrawal strength of

2200 N (Face) & 1100 N (Edge), minimum

53 26.86 compressive strength of 58 N/mm2, modulus of ₹ 0.00

elasticity 900 N/mm2 and resistance to spread of

flame of Class A category with property of being

termite/borer proof, water/moisture

proof and fire retardant and fixed in position with

M.S hold fast/lugs/SS dash fasteners of required

dia and length complete as per direction of

Engineer-In- Charge. (M.S hold fast/lugs or SS

dash fasteners shall be paid for separately). Note:

For WPC solid door/window frames, minus 5 mm

tolerance in dimensions i.e depth and width of

profile shall be acceptable. Variation in profile

dimensions on plus side shall be acceptable but no

extra payment on this account shall be made.

Providing and fixing factory made single extruded

WPC (Wood Polymer Composite) solid decorative

type flush door shutter of required size comprising

of virgin polymer of K value 58-60 (Suspension

Grade), calcium carbonate and natural fibers (wood

powder/ rice husk/wheat husk) and non toxic

additives (maximum toxicity index of 12 for 100

gms) having minimum density of 650 kg/cum and

screw withdrawal strength of 1800 N (Face) & 900

N (Edge), minimum compressive strength 50

N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spread of flame of Class A category

with property of being termite/borer proof,

water/moisture proof and fire retardant. WPC to be

laminated with PVC foil of minimum 14 microns

thick of approved design pasted with hot melt

adhesive on both faces of shutter and fixing with

stainless steel butt hinges of required size with

necessary full body threaded star headed counter

sunk S.S screws, all as per direction of Engineer-In-

Charge. (Note: stainless steel butt hinges and

necessary S.S screws shall be paid separately)

Providing and fixing IS : 12817 marked stainless

57 9.70 steel butt hinges with stainless steel screws etc. ₹ 0.00

6 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing of (Lilli Windows/ A2Z Infra

Solutions/BWS Windows make) Double rebate

windows & ventilators made of High-performance

factory-made system Aluminium windows with

Akzonobel powder coating of 60-70 microns (Any

RAL Colour). Section for Outer frame should be a

single section of 91mm x 35mm, Glass shutter

frame shall be of 54mm x 30mm, Mesh shutter

frame shall be of 54mm x 30mm, 5mm thick Single

Glazed beading shall be of 15mm x 18mm.

Coupling of 2 windows shall not be permitted. 5mm

thick Clear Glass shall be used in all the windows &

ventilators. Stainless Steel Wire Mesh shall be used

in Wire mesh Shutters. 10mm Sq bar M.S.

Grill/Guard bar with 150mm c/c shall be fixed in

between glass & mesh shutter. All frame corners

shall be joined/assembled using self-locating corner

cleats (No screwing at corners shall be allowed). All

Hardware shall be used from a reputed brand,

weather silicon shall be used for filling the gap

between window opening & window Frame

complete in all respect including all taxes. Windows

shall be procured directly from the original

manufacturer/company. Procurement through their

fabricators/dealers shall not be permitted.Billing

shall also be done directly by the manufacturer in

the name of the contractor/bidder to ensure

authenticity of the material.

Wire mesh / Glazing of plain/ toughened/ laminated/

double glass unit with / without high performance

coatings as per design requirements and

conforming to IS: 3548 & IS: 16231 shall be paid

separately. Note:- Structural design proof checked

from a Government Engineering Institute, to be

provided by the manufacturer for : (i) Sites with

basic wind speed > 45 m/sec as per IS 875 – Part 3

(ii) Sites with structure height more than 20m for all

Providing and fixing of (Lilli Windows /A2Z Infra

Solutions/Bws Windows – Bhaarat Win Solutions

make) 3 Track Sliding windows made of High-

performance factory-made system Aluminium

windows with Akzonobel powder coating of 60-70

microns (Any RAL Colour). The Extruded

Aluminium section should be made from aluminium

of grade - 6063 T6. Section for Outer frame should

be of 90mm x 46mm, Glass shutter frame shall be

of 65mm x 29mm, Mesh shutter frame shall be of

52mm x 18mm, Interlock section size shall be

23mm. 24mm thick Double Glazed Unit comprising

61 MRC-11 6mm Reflective Tuffened Glass on both the side Sqm 10.00 12608.70 ₹ 1,26,086.96

with 12mm airgap in between shall be used in all

the windows. Nylon Wire Mesh shall be used in

Wire mesh Shutters. All frame corners shall be

joined/assembled using self-locating corner cleats

(No screwing at corners shall be allowed). System

should qualify Wind load resistance as per BSEN

12210 – 2kpa, water tightness as per BSEN 12208

– 200 pa & Air tightness as per BSEN 12207 –

Class 2.All Hardware shall be used from a reputed

brand, weather silicon shall be used for filling the

gap between window opening & window Frame

complete in all respect including all taxes.

7 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing of ventilators made of SKAB40

series (Lilli Windows/A2Z Infra Solutions/BWS

Windows – Bhaarat Win Solutions make) High

performance prefabricated factory-made system

Aluminium with powder coating of 60-70 microns.

Section for outer frame should be of 40mm x

39mm, section for glass shutter and mullion should

be of 54mm x 40mm. All frame corners shall be

joined/assembled using self-locating corner cleats

(No screwing at corners shall be allowed). 6mm

Clear/Frosted Annealed glass shall be used in all

the ventilators. Weather silicon sealant of reputed

make to be used to make glazing water tight,

complete for finished item of work.

Providing & fixing fly proof wire gauze to windows,

63 10.29 clerestory windows & doors with M.S. Flat 15x3 mm ₹ 0.00

and nuts & bolts complete.

Stainless steel (grade 304) wire gauze of 0.5 mm

dia wire and 1.4 mm aperture on both sides

Providing and fixing certified restroom cubicle

system of approved make comprising of green

guard certified solid compact laminated water proof

board, minimum 18 mm thick made as per IS: 2046

(phenolic core board) and as per BS-476/97 for fire

retardant for toilet showers, water closet etc . The

board shall be manufactured under high pressure

and temperature by impregnating kraft papers and

outer decorative papers with thermosetting

phenolic/ melamine resins (low VOC). The cubicle

system shall be resistant towards water, chemical,

scratch, impact and heat and shall be anti bacterial,

colour fast and shall have accessories like door

knob, Gravity/ auto return hinges, privacy thumb

turn with occupancy indicator, coat Hook, etc all in

SS 304. The hardware and fixings includes

anchoring of all fixed front panel to floor with SS

316 L brackets/ base plates with a clearance height

upto 110 mm, and covered with SS 316 Shoe box

plates, wall and corner joineries (brackets and

channels) shall be SS 304 grade, SS 304 screws,

rubber noise reduction tape .

The cubicle unit shall be installed in approved

finish, shades and colours as per specifications and

directions of Engineer-In-Charge, including

minimum 5 (five) years warranty against any

66 moisture related damages to all intermediate ₹ 0.00

panels, doors, hardqwares etc. Standard dimension

of the cubicle system shall be of approx. 2100 mm

Height(overall) x 1500mm Depth and 1200 mm

Width which includes 600mm door size width.

I shaped Cubicle System consisting of front face

67 panel including door and all necessary accessories, Each 2.00 29381.57 ₹ 58,763.13

fittings and hardware etc.

L shaped Cubicle System consisting of front face

68 panel including door, intermediate panel and all Each 4.00 42367.78 ₹ 1,69,471.13

necessary accessories, fittings and hardware etc.

69 10.0 STEEL WORK ₹ 0.00

Providing and fixing 1mm thick M.S. sheet door with

frame of 40x40x6mm angle iron and 3 mm M.S.

70 10.5 gusset plates at the junctions and corners, all ₹ 0.00

necessary fittings complete, including applying a

priming coat of approved steel primer.

71 10.5.1 Using M.S. angels 40x40x6 mm for diagonal braces Sqm 3.15 5804.35 ₹ 18,283.70

8 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Supplying and fixing rolling shutters of approved

make, made of required size M.S. laths, interlocked

together through their entire length and jointed

together at the end by end locks, mounted on

specially designed pipe shaft with brackets, side

guides and arrangements for inside and outside

72 10.6 locking with push and pull operation complete, ₹ 0.00

including the cost of

providing and fixing necessary 27.5 cm long wire

springs manufactured from high tensile steel wire of

adequate strength conforming to IS: 4454 - part 1

and M.S. top cover of required thickness for rolling

73 10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top Sqm 9.00 3653.20 ₹ 32,878.80

cover work welded in built up sections/ framed work

including cutting, hoisting, fixing in position and

applying a priming coat of approved steel primer

using structural steel etc. as required

In stringers, treads, landings etc. of stair cases

75 10.25.1 including use of chequered plate wherever required, Kg 1000.00 123.60 ₹ 1,23,600.00

In gratings, frames, guard bar, ladder, railings,

brackets, gates and similar works.

Providing and fixing carbon steel galvanised (

minimum coating 5 micron) dash fastener of 10 mm

dia double threaded 6.8 grade (yield strength 480

77 10.27 N/mm2), counter sunk head, comprising of 10 m dia ₹ 0.00

polyamide PA 6 grade sleeve, including drilling of

hole in frame , concrete/ masonry, etc. as per

direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304)

railing made of Hollow tubes, channels, plates etc.,

including welding, grinding, buffing, polishing and

making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners ,

stainless steel bolts etc., of required size, on the top

of the floor or the side of waist slab with suitable

arrangement as per approval of Engineer-in-

charge, (for payment purpose only weight of

stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts,

fasteners etc.).

Providing and Installing glass railing with SS

structure and handrail for Balcony area side at all

floors using SS handrail structure (Grade 302) till

900 mm height supporting 1200mm high 8mm

toughned glass panels towards atrium opening fixed

with SS handrail using SS studs welded to vertical

mulians to hold glass as per approved drawing and

engineer incharge.

81 11.0 FLOORING WORK ₹ 0.00

Cement concrete flooring 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate) finished

82 11.3 with a floating coat of neat cement, including ₹ 0.00

cement slurry, but excluding the cost of nosing of

steps etc. complete.

40 mm thick with 20 mm nominal size stone

Kota stone slab flooring over 20 mm (average) thick

base laid over and jointed with grey cement slurry

84 11.26 mixed with pigment to match the shade of the slab ₹ 0.00

including rubbing and polishing complete with base

of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

9 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Kota stone slabs 20 mm thick in risers of steps,

skirting, dado and pillars laid on 12 mm (average)

thick cement mortar 1:3 (1 cement 3 coarse sand)

and jointed with grey cement slurry mixed with

pigment to match the shade of the slabs, including

rubbing and polishing complete.

Extra for pre finished nosing to treads of steps of

marble / granite stone.

Extra for marble / granite stone flooring in treads of

88 11.25 steps and risers using single length up to 2.00 Sqm 157.97 851.80 ₹ 1,34,557.91

Providing and laying Vitrified tiles in floor in different

sizes (thickness to be specified by the

manufacturer) with water absorption less than

0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid

on 20 mm thick cement mortar 1:4 (1 cement: 4

coarse sand) jointing with grey cement slurry @3.3

kg/sqm including grouting the joints with white

cement and matching pigments etc. The tiles must

be cut with the zero chipping diamond cutter only .

Laying of tiles will be done with the notch trowel,

plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently

90 11.41A.1 Double charge vitrified tile polished finish of size ₹ 0.00

92 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size ₹ 0.00

11.41A.3. Size of Tile 600 x 600 mm

11.41A.3. Size of Tile 600 x 1200 mm

Providing and laying flamed finish Granite stone

flooring in required design and patterns, in linear as

well as curvilinear portions of the building all

complete as per the architectural drawings with 18

mm thick stone slab over 20 mm (average) thick

base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with cement slurry and

pointing with white

cement slurry admixed with pigment of matching

shade including rubbing, curing and polishing etc.

all complete as specified and as directed by the

Engineer-in-Charge :

Flamed finish granite stone slab Jet Black, Cherry

Brown, Cat Eye or equivalent.

Providing and laying machine cut, mirror polished

Marble stone flooring, in required design (Simple

geometrical, abstract etc.) and in patterns in

combination with Italian marble stones of different

colours, shades and finished surface texture etc., in

linear portions of the building, all complete as per

the architectural drawings, with 18 mm thick stone

97 MRC-15 slab laid over 20 mm (average) thick base of ₹ 0.00

cement mortar 1:4 (1 cement : 4 coarse sand) laid

and jointed with white cement slurry @ 4.4 kg/sqm

including pointing with white cement slurry admixed

with pigment to match the marble shade including

rubbing, curing and polishing etc. all complete as

specified and as directed by the Engineer-in-

Charge(Base rate of marble -5000 rs/sqmt)

18 mm thick Italian Marble stone slab, Perlato,

Rosso verona, Fire Red or Dark Emperadore etc.

10 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and laying Polished Granite stone flooring

in required design and patterns, in linear as well as

curvilinear portions of the building all complete as

per the architectural drawings with 18 mm thick

stone slab over 20 mm (average) thick base of

99 11.56 cement mortar 1:4 (1 cement : 4 coarse sand) laid ₹ 0.00

and jointed with cement slurry and pointing with

white cement slurry admixed with pigment of

matching shade including rubbing, curing and

polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black,

Red or equivalent

Providing and fixing of Woven vinyl carpet floorings

with roll dimensions of 1.8/2mtr meters width and

length of 20 meters or Tiles size as per company

standard should be approved by architech. 2.8 mm

+ 1 mm (Acoustic Backing) thickness to laid on

hard, levelled, smooth and moisture free sub floor.

Vibrant Woven Vinyl flooring should have traffic

classification 33 and weight of 2.7-3.5 kg/m2.

Flooring should have caster chair EN-985 tested

with color fastness of more than 6. It should be

ASTME662 qualified on Smoke density test.

Product must be fire rating of the product should be

Bfl-S1. Any Joints in flooring rolls should be sealed

with cold welding.As per approved shade and

colour as per the satisfaction of the Architect

(commercial grade)

Providing and laying 600X600mm Commercial Tiles

in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08

% and conforming to I.S. 15622, of approved make,

in all colours & shade, in skirting, riser of steps,

102 MRC-17 over 12 mm thick bed of cement mortar 1:3 (1 Sqm 20.00 1425.13 ₹ 28,502.61

cement: 3 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joint

with white cement & matching pigments etc.

complete. etc. wherever required all complete as

specified, as per Architectural drawings and as

11 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing false ceiling at all height

including providing and fixing of frame work made

of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120

gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6

mm thick with flanges of 27 mm and 37mm, at 1200

mm centre to centre, one flange fixed to the ceiling

with dash fastener 12.5 mm dia x 50mm long with

6mm dia bolts, other flange of cleat fixed to the

angle hangers of 25x10x0.50 mm of required length

with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm ₹ 0.00

centre to centre, to which the ceiling section 0.5 mm

thick bottom wedge of 80 mm with tapered flanges

of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230

mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the

help of rawl plugs at 450 mm centre, with 25mm

long dry wall screws @ 230 mm interval,

including fixing of gypsum board to ceiling section

and perimeter channel with the help of dry wall

screws of size 3.5 x 25 mm edges of the board with

recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering

upto 150 mm on both sides of joint and two coats of

primer suitable for board, all as per manufacturer's

105 specification and also including the cost of making ₹ 0.00

openings for light fittings, grills, diffusers, cutouts

made with frame of perimeter channels suitably

fixed, all complete as per drawings, specification

and direction of the Engineer in Charge but

excluding the cost of painting with : at 230 mm c/c,

including jointing and finishing to a flush finish of

tapered and square

12.5 mm thick tapered edge gypsum moisture

resistant board.

12 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing tiled false ceiling of specified

materials of size 595x595 mm in true horizontal

level, suspended on inter locking metal grid of hot

dipped galvanized steel sections ( galvanized @

120 grams/ sqm, both side inclusive) consisting of

main "T" runner with suitably spaced joints to get

required length and of size 24x38 mm made from

0.30 mm thick (minimum) sheet, spaced at 1200

mm center to center and cross "T" of size 24x25

mm made of 0.30 mm thick (minimum) sheet, 1200

mm long spaced between main "T" at 600 mm

center to center to form a grid of 1200x600 mm and

secondary cross "T" of length 600 mm and size

24x25 mm made of 0.30 mm thick (minimum) sheet

to be interlocked at middle of the 1200x600 mm

107 12.52 panel to form grids of 600x600 mm and wall angle ₹ 0.00

of size 24x24x0.3 mm and laying false ceiling tiles

of approved texture in the grid including, required

cutting/making, opening for services like diffusers,

grills, light fittings, fixtures, smoke detectors etc.

Main "T" runners to be suspended from ceiling

using GI slotted cleats of size 27 x 37 x 25 x1.6 mm

fixed to ceiling with 12.5 mm dia and 50 mm long

dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85 x 30 x 0.8

mm spaced at 1200 mm center to center along

main T, bottom exposed width of 24 mm of all T-

sections shall be pre-painted with polyester paint,

all complete for all heights as per specifications,

drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global

white color tiles of size 595x595 mm, and 0.5 mm

thick with 8 mm drop; made of G I sheet having

108 12.52.1 galvanizing of 100 gms/sqm (both sides inclusive) Sqm 469.60 1902.95 ₹ 8,93,628.60

and electro statically polyester powder coated of

thickness 60 microns (minimum), including factory

painted after bending.

GI Metal Ceiling Lay in perforated Tegular edge

global white color tiles of size 595x595 mm and 0.5

mm thick with 8 mm drop; made of GI sheet having

galvanizing of 100 gms/sqm (both sides inclusive)

and 20% perforation area with 1.8 mm dia holes

and having NRC (Noise Reduction Coefficient ) of

0.5, electro statically polyester powder coated of

thickness 60 microns (minimum), including factory

painted after bending and perforation, and backed

with a black Glass fiber acoustical fleece.

13 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing Gl Clip in Metal Ceiling System

of 600x600 mm module which includes providing

and fixing ‘C’ wall angle of size 20x30x20 mm made

of 0.5 mm thick pre painted steel along the

perimeter of the room with help of nylon sleeves

and wooden screws at 300 mm center to centre,

suspending the main C carrier of size 10x38x10

mm made of G.I steel 0.7 mm thick from the soffit

with the help of soffit cleat 37x27x25x1.6

mm, rawl plugs of size 38x12 mm and C carrier

110 12.54 suspension clip and main carrier bracket at 1000 ₹ 0.00

mm c/c. Inverted triangle shaped Spring Tee having

height of 24 mm and width of 34 mm made of Gl

steel 0.45 mm thick is then fixed to the main C

carrier and in direction perpendicular to it at 600

mm centers with the help of suspension brackets.

Wherever the main C carrier and spring T have to

join, C carrier and spring T connectors have to be

used. All sections to be galvanized @ 120 gms/sqm

(both side inclusive), fixing with clip in tiles into

spring T with :

GI Metal Ceiling Clip in plain Beveled edge global

tiles of size 600x600 and 0.5 mm thick with 25 mm

height, made of G I sheet having galvanizing of 100

gms/ sqm (both sides inclusive) and electro

statically polyester powder coated of thickness 60

microns (minimum), including factory painted after

Open Cell Ceiling System Supply &Installation of

Aluminium - AA3105 open Cell Ceiling 50E of

approved colour consisting of

MainRunner,CrossRunner,UpperSections,Lower

Sections all of U-Shaped Profiles Coil coated on a

continuous Paint Line,Double baked and roll formed

from enamelled corrosion resistance Aluminium

alloy for higher strength and good rollforming

characteristics. The celling panels coil undergoes

through levelling process on advanced CAD/CAM

equipment to acheive levelling through ARKU SIX

Hi configuration roller levelling process to ensure

the flatness of the coil in the manufacturing process

and relevesstresses of coil. Cell ceiling panels

should be manufactured from Rollforming machine

to get the high - quality panels with accurate

112 MRC-18 dimensions. The Main Runner shall be fixed at a Sqm 186.99 14416.61 ₹ 26,95,749.77

distance of 1.2mtrsc/c and shall be suspended by

means of G.l. Suspension Rod 6 mm diameter and

a Galvanized Suspension Spring Clip at a distance

of 1.2mtrc/c. The Cross-Runner shall be fixed to the

Main Runner at a distance 0.6mtrsc/c.,with a self-

locking device. The Upper Section and Lower

section shall be fixed to the MainRunnerand Cross

Runner in a form of a Cell Structure of module

100X100mm. Paint Finish: The baffle coils to go

through 4 stages of pre-treatment,three times oven

baked through conversion coating, priming and

finish coat ensuring superior adhesion,high

corrosion resistance and good colour stability. All

ceiling shall be Green pro Certified: ForLEED

certification by Indian Green Building council

(IGBC). Ceiling manufacturer should have local

manufacturing unit in India.

14 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Wooden Grid Ceiling : Providing & Fixing of

Armstrong/Anutone/approved equivalent Wooden

finishes Suspended Ceiling System with

WOODWORKS 600mm X 600 & 1200x600 mm

with 1200x150/100mm (MICRO LOOK) EDGE

TILES WITH ARMSTRONG Silhouette B/R 15 MM

EXPOSED GRID. (considering all levels with

require all fabricataion work and fitiing from RCC

slab to false ceiling 100 to 300 mm)The Tile with

perforation pattern as per architect suggestion with

approved veneer shade with semigloss PU finish

Humidity Resistance (RH) of 90%, Fire

Performance Class 1(BS - 476) in module size of

600mm x 600mm x 12mm with 1200x300x12mm

with and density of 830 Kgs/M3. The grid should be

of “Armstrong” make with Silhouette B/R 15mm

113 MRC-19 wide T - section flanges color white having rotary Sqm 124.00 6580.39 ₹ 8,15,968.52

stitching on all T sections i.e. the Main Runner,

1200 mm & 600 mm Cross Tees with a web height

of 38mm and a load carrying capacity of 14.29

Kgs/M2. The T Sections have a Galvanizing of 90

grams per M2 and pullout strength of 100kg.

Suspension system for Armstrong grid to be of

Armstrong make.INSTALLATION: To comprise

main runner spaced at 1200mm centers securely

fixed to the structural soffit using Armstrong

suspension system (specifications below) at

1200mm maximum centre. The First/Last

Armstrong suspension system at the end of each

main runner should not be greater than 450mm

from the adjacent wall. Flush fitting 1200mm long

cross tees to be interlocked between main runners

at 600mm centre to form 1200 x 600 mm module.

Providing teesfixing

longerofthan 600mm

Baffle requiresystem

comprises 75 mm x 150 mm (75 mm width and 150

mm Height) U Shape panels. Panels shall be made

of 0.7 mm thick Aluminium sheet with wooden finish

powder coating on the front side with 60 microns

powder coating. Length of the panel will be up to

3000 mm. Panel shall be high corrosion resistance

and good color stability. Panel to panel gap will be

150 mm. Panels are fixed on to roll formed carriers

50 mm wide x 20 mm deep out of 0.75 mm G.I

sheet powder coated with cutouts to hold the panels

114 MRC-20 in module of 150 mm at maximum 1200 mm c/c. Sqm 232.07 9361.00 ₹ 21,72,371.23

Carriers are suspended from the roof or truss by 6

mm dia. galvanized thread rod hanger with height

adjustment at max. 1200 mm c/c. Hangers are fixed

to the roof by ‘J’ hooks or ceiling brackets and

Fasteners. Panels are factory cut in lengths up to

maximum 3000 mm to suit site dimensions or shop

drawings. Top cap and side cap are used to cover

the edges of the panels. Inner cap and outer cap

are used to nut bolt the panel with carrier. These

Baffles are light weight and do not add any extra

load on ceiling.

15 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Wooden ceiling finish with veneer:Providing and

fixing IS 710 12 mm thick plywood false ceiling

as per drawing & instruction of EIC & sample

approved (complete with frame work). finish with 4

mm th veneer gurjan base ply Semi glossy

malamine finish polish. Plywood shall be fixed with

required fabrication work and ply frame work with

all necessary acessories Rate shall include cost of

making of all cutouts for light fixtures, gadgets,

115 MRC-21 gizmo, pelmets, grooves, beads and also provide Sqm 15.00 4566.13 ₹ 68,491.96

support/template where ever requiredThe rate shall

be in sq.mt for all floors and at all heights including

all costs the shop drawing (or a sample mock of 5

Sqm minimum of the frame work and ceiling) shall

be approved from EIC. 5mm Groove shall be

provided at the junction of the false ceiling & the

wall. ( considering all levels with require all

fabricataion work and fitiing from RCC slab to false

ceiling100 to 1000 mm)

Providing and fixing Metallic Duco Paint in Ceiling at

all heights and levels and of any shapewherever

shown on dawing consist of 12 - 25 mm MDF duly

116 MRC-22 suspended or fixed on existing finished base with Sqm 5.00 8037.70 ₹ 40,188.48

required hardware finished with approved shade of

metallic duco including rubbing polishing to achieve

desired finish in gloss or matt.

Providing and fixing mineral fibre false ceiling tiles

at all heights of size 595X595 mm of approved

texture, design and pattern. The tiles should have

Humidity Resistance (RH) of 99%, Light

Reflectance ≥ 85%, Thermal Conductivity k = 0.052 -

0.057 w/m K, Fire Performance as per (BS 476 pt -

6 &7)in true horizontal level suspended on

interlocking T-Grid of hot dipped all round

galvanized iron section of 0.33 mm thick

(galvanized @120 gsm) comprising of main T

runners of 15x32 mm of length 3000 mm, cross T of

size 15x32 mm of length 1200 mm and secondary

intermediate cross T of size 15x32 mm of length

600 mm to form grid module of size 600x600 mm

suspended from ceiling using galvanized mild steel

item (galvanised@80gsm) 50 mm long 8 mm outer

117 26.27 diameter M-6 dash fasteners, 6 mm diameter fully ₹ 0.00

threaded hanger rod up to 1000 mm length and L-

shape level adjuster of size 85x25x2 mm, spaced at

1200 mm centre to centre along main ‘T’. The

system should rest on periphery walls /partitions

with the help of GI perimeter wall angle of

size24x24X3000 mm made of 0.40 mm thick sheet,

to be fixed to the wall with help of plastic rawl plug

at 450 mm centre to centre & 40 mm long dry wall

S.S. screws. The exposed bottom portion of all T-

sections used in false ceiling support system shall

be pre-painted with polyester baked paint, for all

heights. The work shall be carried out as per

specifications,

drawings and as per directions of the engineer-in-

With 16 mm thick beveled tegular mineral fibre false

tile (NRC 0.55 to 0.60)

119 13.0 FINISHING WORK ₹ 0.00

120 13.4 12 mm cement plaster of mix : ₹ 0.00

15 mm cement plaster on rough side of single or

half brick wall of mix :

16 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

124 13.6 20 mm cement plaster of mix : ₹ 0.00

126 13.16 6 mm cement plaster of mix : ₹ 0.00

Providing and applying plaster of paris putty of 2

128 13.26 mm thickness over plastered surface to prepare the Sqm 1370.38 262.70 ₹ 3,60,000.00

surface even and smooth complete.

129 13.37 White washing with lime to give an even shade : ₹ 0.00

130 13.37.1 New work (three or more coats) Sqm 98.89 39.05 ₹ 3,861.50

Distempering with 1st quality acrylic distemper,

having VOC (Volatile Organic Compound ) content

less than 50 grams/ litre, of approved brand and

manufacture, including applying additional coats

wherever required, to achieve even shade and

New work (two or more coats) over and including

thinnable priming coat with cement primer having

VOC content less than 50 gram / litre

Applying priming coats with primer of approved

133 13.85 brand and manufacture, having low VOC (Volatile ₹ 0.00

Organic Compound ) content.

With ready mixed pink or grey primer on wood work

134 13.85.1 (hard and soft wood) having VOC content less than Sqm 52.33 70.35 ₹ 3,681.22

50 grams/ litre

With water thinnable cement primer on wall surface

VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of

interior grade, having VOC (Volatile Organic

Compound ) content less than 50 grams/ litre of

approved brand and manufacture, including

applying additional coats wherever required to

achieve even shade and colour.

Finishing walls with textured exterior paint of

required shade :

New work (Two or more coats applied @ 3.28 ltr/10

139 13.45.1 sqm) over and including priming coat of exterior Sqm 1459.03 223.60 ₹ 3,26,239.12

primer applied @ 2.20kg/10 sqm

Painting with synthetic enamel paint of approved

brand and manufacture to give an even shade :

141 13.62.1 Two or more coats on new work Sqm 52.33 226.25 ₹ 11,839.05

Add for plaster drip course/ groove in plastered

surface or moulding to R.C.C. projections.

Providing and applying white cement based putty of

average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to

prepare the surface even and smooth complete

17 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing of façade at all heights with

extruded hollow Clay / Terracotta ventilated

rainscreen tiles of height 250/ 300/ 400mm and

length of 595 mm of approved texture,design and

pattern having Flexural Strength/ Modulus of

Rupture of ? 14 N/m² and maximum water

absorption of 10% tested as per ISO 10545-

4:2004(E) and ISO 10545-3:1995 respectively in

true level fixed to a supporting aluminium

framework(Alloy 6063 T5/T6) consisting of vertical

'T' (for intermediates)/ 'L'(for ends/ termination)/

Tubular sections (at corners)of size 80x60x2mm/

40x60x2mm/ 40x40x2mm respectively, spaced at

maximum spacing of 600mm c/c matching to the tile

vertical grid, and horizontal aluminium 'C'-clamps of

size 56x25x2mm thickness of length 150mm at

junction of tiles and of length 75mm at wall ends/

corners fixed on top of the vertical sections at

spacing of 250/ 300/ 400mm c/c matching to the tile

horizontal grid with two numbers of self-drilling / self-

tapping SS screws of size 5.5x25 mm with EPDM

The vertical 'T'/'L/ Tubular' sections shall be fixed to

the wall using HDG (hot-dip-galvanized) steel L-

brackets (galvanizing thickness of minimum 80

microns)of size 110x80x6 mm at intermediate

vertical aluminium profiles and of size

220x110x12mm at outer corners and stainless steel

grade 304,M10 full threaded anchor fasteners with

nylon sleeve 100mm long (for brick work) and M8

expansion anchor fasteners 75mm long for

concrete surface, spacing of brackets to be based

145 on a structural/ static calculation. The brackets shall ₹ 0.00

be of length 175mm at junction of two vertical

aluminium profiles and of length 100mm at

intermediate points of vertical profiles and shall be

fixed to the vertical aluminium T / L /Tubular profiles

using two numbers self-drilling/ self-tapping SS

screws of size 5.5x25mm with EPDM washers.

EPDM gaskets to be fixed in between brackets and

vertical profiles. The tiles shall be mounted on the

‘C’ clamps such that the tiles are supported at top

and bottom at both ends.

The tiles shall be additionally secured to the

horizontal ‘C’ clamps using special SS clips of

required size which shall be inserted and pressed

into position on the ‘C’ clamps holding the tiles and

the cut-tiles shall be glued at points to the horizontal

‘C’ clamps by using MS Polymer sealant adhesive.

The vertical joint open groove between two

adjacent tiles shall be 5mm. The tiles and system

146 shall be designed to resist wind load as per IS 875 ₹ 0.00

(Part 3) according to different zones. The tiles shall

be installed using the ventilated rain screen

principle with provision for natural ventilation of the

space between the façade tiles and the structural

wall. The work shall be carried out as per

specification, drawing and as per direction of the

Engineer-in-Charge. Note : Scaffolding wherever

required to be paid separately.

With 16mm thickness (+/- 10%) terracotta tiles of

other than grey colour

18 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing double scaffolding system (cup

lock type) on the exterior side, up to seven story

height made with 40 mm dia M.S. tube 1.5 m centre

to centre, horizontal & vertical tubes joining with cup

& lock system with M.S. tubes, M.S. tube challies,

M.S. clamps and M.S. staircase system in the

scaffolding for working platform etc. and

maintaining it in a

serviceable condition for the required duration as

148 14.72 approved and removing it there after. The Sqm 97.27 338.25 ₹ 32,901.13

scaffolding system shall be stiffened with bracings,

runners, connection with the building etc wherever

required for inspection of work at required locations

with essential safety features for the workmen

etc. complete as per directions and approval of

Engineer-in-charge. The elevational area of the

scaffolding shall be measured for payment purpose.

The payment will be made once irrespective of

duration of scaffolding.

149 15.0 DISMANTLING WORKS ₹ 0.00

Demolishing brick work manually/ by mechanical

means including stacking of serviceable material

and disposal of unserviceable material within 50

metres lead as per direction of Engineer-in-charge.

Dismantling doors, windows and clerestory windows

(steel or wood) shutter including chowkhats,

architrave, holdfasts etc. complete and stacking

within 50 metres lead

153 15.12.1 Of area 3 sq. metres and below each 100.00 367.20 ₹ 36,720.00

154 15.12.2 Of area beyond 3 sq. metres each 100.00 502.75 ₹ 50,275.00

Dismantling steel work in built up sections in angles,

tees, flats and channels including all gusset plates,

bolts, nuts, cutting rivets, welding etc. including

dismembering and stacking within 50 metres lead.

Dismantling tile work in floors and roofs laid in

156 15.23 cement mortar including stacking material within 50 ₹ 0.00

157 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 2091.36 73.40 ₹ 1,53,505.70

For thickness of tiles above 25 mm and up to 40

Dismantling stone slab flooring laid in cement

mortar including stacking of serviceable material

and disposal of unserviceable material within 50

Demolishing brick tile covering in terracing including

160 15.26 stacking of serviceable material and disposal of ₹ 0.00

unserviceable material within 50 metres lead.

Dismantling precast concrete or stone slabs in

161 15.40 walls, partition walls etc. including stacking within 50 Sqm 50.00 105.35 ₹ 5,267.50

163 15.40.2 Thickness above 40 mm up to 75 mm Sqm 75.00 433.55 ₹ 32,516.25

Dismantling C.I. or asbestos rain water pipe with

164 15.42 fittings and clamps including stacking the material ₹ 0.00

within 50 metres lead :

Dismantling G.I. pipes (external work) including

excavation and refilling trenches after taking out the

167 15.44 pipes, manually/ by mechanical means including ₹ 0.00

stacking of pipes within 50 metres lead as per

direction of Engineer-in-charge :

169 15.44.2 Above 40 mm nominal bore metre 350.00 161.40 ₹ 56,490.00

19 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Dismantling C.I. pipes including excavation and

refilling trenches after taking out the pipes,

manually/ by mechanical means breaking lead

170 15.45 caulked joints, melting of lead and making into ₹ 0.00

blocks including stacking of pipes & lead at site

within 50 metre lead as per direction of Engineer-in-

Dismantling of flushing cistern of all types

(C.I./PVC/Vitrious China) including stacking of

useful materials near the site and disposal of

unserviceable materials within 50 metres lead.

Dismantling of spindle fire hydrant including

stacking of useful materials within 50 metres lead.

Dismantling of cement concrete platform along with

curtain walls and base concrete etc. including

174 15.55 stacking of useful materials near the site and ₹ 0.00

disposal of unserviceable materials within 50

Dismantling old plaster or skirting raking out joints

and cleaning the surface for plaster including

disposal of rubbish to the dumping ground within 50

Dismantling aluminium/ Gypsum partitions, doors,

windows, fixed glazing and false ceiling including

179 15.57 disposal of unserviceable material and stacking of Sqm 1250.00 56.35 ₹ 70,437.50

serviceable material with in 50 meters lead as

directed by Engineer- in-charge.

Disposal of building rubbish / malba / similar

unserviceable, dismantled or waste materials by

mechanical means, including loading, transporting,

unloading to approved municipal dumping ground

or as approved by Engineer-in-charge, beyond 50

m initial lead, for all leads including all lifts involved.

Dismantling of existing false ceiling manually or by

mechanical means, including shifting of material

within site for dumping area as approved by

Engineer-in-charge, for all leads including all lifts

involved. Note: Measurement shall be as per length

of existing railing.

Dismantling and reinstalling existing SS railing in

182 MRC-24 stairs with required modification to carry out wall metre 75.00 1374.92 ₹ 1,03,118.92

Dismantling of existing wall tiling manually or by

mechanical means, including shifting of material

183 MRC-25 within site for dumping area as approved by Sqm 399.81 257.22 ₹ 1,02,836.85

Engineer-in-charge, for all leads including all lifts

Dismantling of polycarbonate dome manually or by

mechanical means, including shifting of material

184 MRC-26 within site for dumping area as approved by Sqm 50.00 709.65 ₹ 35,482.61

Engineer-in-charge, for all leads including all lifts

Dismantling of above false ceiling services

consisting of HVAC duct , diffusers etc., including

their accessories etc. and cleaning the surface to

receive new false ceiling as per approved design.

Note: Measurement shall be as per existing false

ceiling floor area. Note: Measurement shall be as

per existing false ceiling floor area without any

20 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Dismantling of above false ceiling services

consisting of fire sprinkler pipes including their

accessories etc. and cleaning the surface to receive

new false ceiling as per approved design. Note:

Measurement shall be as per existing false ceiling

floor area without any projections.

Dismantling of above false ceiling services

consisting of electrical wiring and conduits LV

cables including their accessories etc. and cleaning

187 MRC-29 the surface to receive new false ceiling as per Sqm 950.00 159.65 ₹ 1,51,669.57

approved design. Note: Measurement shall be as

per existing false ceiling floor area without any

188 21.0 ALUMINIUM & STRUCTURAL GLAZING WORK ₹ 0.00

Providing and fixing aluminium work for doors,

windows, ventilators and partitions with extruded

built up standard tubular sections/appropriate Z

sections and other sections of approved make

conforming to IS: 733 and IS : 1285, fixed with rawl

plugs and screws or with fixing clips, or with

expansion hold fasteners including necessary filling

up of gaps at junctions, at top, bottom and sides

with required PVC/neoprene felt etc. Aluminium

sections shall be smooth, rust free, straight, mitred

and jointed echanically wherever required including

cleat angle, Aluminium snap beading for glazing /

paneling, C.P. brass / stainless steel screws, all

complete as per architectural drawings and the

directions of Engineer-in-charge. Glazing and

paneling to be paid for separately) :

190 21.1.1 For fixed portion. ₹ 0.00

Powder coated aluminium (minimum thickness of

powder coating 50 micron)

For shutters of doors, windows & ventilators

including providing and fixing hinges/ pivots and

making provision for fixing of fittings wherever

required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for

Powder coated aluminium (minimum thickness of

powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated

particle board flat pressed three layer or graded

wood particle board conforming to IS: 12823 Grade

l Type ll, in panelling fixed in aluminum doors,

windows shutters and partition frames with C.P.

brass / stainless steel screws etc. complete as per

architectural drawings and directions of engineerin-

Pre-laminated particle board with decorative

lamination on both sides

Providing and fixing glazing in aluminium door,

window, ventilator shutters and partitions etc. with

EPDM rubber / neoprene gasket etc. complete as

per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap

beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight

not less than 12.50 kg/sqm)

With float glass panes of 8 mm thickness (weight

than 20 kg/sqm)

21 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Filling the gap in between aluminium frame and

adjacent RCC/Brickwork/ Stone Work by providing

199 21.8 weather silicon sealant over backer rod of approved ₹ 0.00

quality as per architectural drawings and direction of

Engineer-in-charge

200 21.8.1 Upto 5mm depth and 5mm width metre 150.00 96.75 ₹ 14,512.50

Providing and supplying aluminium extruded tubular

and other aluminium sections as per the

architectural drawings and approved shop drawings

, the aluminium quality as per grade 6063 T5 or T6

as per BS 1474,including super durable powder

coating of 60-80 microns conforming to AAMA 2604

201 25.1 of required colour and shade as approved by the kg 728.44 414.30 ₹ 3,01,792.69

Engineer-in-Charge. ( The item includes cost of

material such as cleats, sleeves, screws etc.

necessary for fabrication of extruded aluminium

frame work. Nothing extra shall be paid on this

account). The weight of aluminium extruded section

shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing

and fixing in position semi (grid) unitized system of

202 25.2 structural/ curtain wall glazing (with open joints) for Sqm 41.06 3510.50 ₹ 1,44,123.58

linear as well as curvilinear portions of the building

for all heights and all levels, including :

a) Structural analysis & design and preparation of

shop drawings for the specified design loads

conforming to IS 875 part III (the system must

passed the proof test at 1.5 times design wind

pressure without any failure), including functional

design of the aluminum sections for fixing glazing

panels of various thicknesses, aluminium cleats,

sleeves and splice plates etc. gaskets, screws,

toggles, nuts, bolts, clamps etc., structural and

weather silicone sealants, flashings, fire stop

(barrier)-cum-smoke seals, microwave cured EPDM

gaskets for water tightness, pressure equalization &

drainage and protection against fire hazard

b) Fabricating and supplying serrated M.S. hot dip

galvanized / Aluminium alloy of 6005 T5 brackets of

required sizes, sections and profiles etc. to

accommodate 3 Dimensional movement for

achieving perfect verticality and fixing structural

glazing system rigidly to the RCC/

masonry/structural steel framework of building

structure using stainless steel anchor fasteners/

bolts, nylon separator to prevent bimetallic contacts

with nuts and washers etc. of stainless steel grade

316, of the required capacity and in required

c) Providing and filling, two part pump filled,

structural silicone sealant and one part weather

silicone sealant compatible with the structural

silicone sealant of required bite size in a clean and

205 controlled factory / work shop environment , ₹ 0.00

including double sided spacer tape, setting blocks

and backer rod, all of approved grade, brand and

manufacture, as per the approved sealant design,

within and all around the perimeter for holding glass

d) Providing and fixing in position flashings of solid

aluminium sheet 1 mm thick and of sizes, shapes

and profiles, as required as per the site conditions,

to seal the gap between the building structure and

all its interfaces with curtain glazing to make it

22 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

e) Making provision for drainage of moisture/ water

that enters the curtain glazing system to make it

watertight, by incorporating principles of pressure

equalization, providing suitable gutter profiles at

bottom (if required), making necessary holes of

required sizes and of required numbers etc.

complete. This item includes cost of all inputs of

designing, labour for fabricating and installation of

aluminium grid, installation of glazed units, T&P,

scaffolding and other incidental charges including

wastages etc., enabling temporary structures and

services, cranes or cradles etc. as described above

and as specified. The item includes the cost of

getting all the structural and functional design

including shop drawings checked by a structural

designer, dully approved by Engineer-in-charge.

The item also includes the cost of all mock ups at

site, cost of all samples of the individual

components for testing in an approved laboratory,

field tests on the assembled working structural

glazing as specified, cleaning and protection till the

handing over of the building for occupation. In the

end, the Contractor shall provide a water tight

structural glazing having all the performance

characteristics etc. all complete as required, as per

the Architectural drawings, as per item description,

as specified, as per the approved shop drawings

and as directed by the Engineer in-Charge.

Note:- 1. The cost of providing extruded aluminium

frames, shadow boxes, extruded aluminium section

capping for fixing in the grooves of the curtain

glazing and vermin proof stainless steel wire mesh

shall be paid for separately under relevant items

under this subhead. However, for the purpose of

payment, only the actual area of structural/ curtain

wall glazing (including width of grooves ) on the

external face shall be measured in sqm. up to two

decimal places.

Providing, assembling and supplying vision glass

panels (IGUs) comprising of hermetically-sealed 6-

12- 6 mm insulated glass (double glazed) vision

panel units of size and shape as required and

specified, comprising of an outer heat strengthened

(as approved) glass 6mm thick, of approved colour

and shade with reflective soft coating on surface # 2

of approved colour and shade, an inner heat

strengthened (as approved) clear float glass 6mm

thick, spacer tube 12mm wide, desiccants, including

primary seal and secondary seal (structural silicone

sealant) etc. all complete for the required

210 25.3 performances, as per the Architectural drawings, as ₹ 0.00

per the approved shop drawings, as specified and

as directed by the Engineer-in-Charge. The IGUs

shall be assembled in the factory/ workshop of the

glass processor. (Payment for fixing of IGU Panels

in the curtain glazing is included in cost of item

No.1.8.16 above). For payment, only the actual

area of glass on face # 1 of the glass panels

(excluding the areas of the grooves and weather

silicone sealant) provided and fixed in position, shall

be measured in sqm. (To be fixed on extruded

aluminium sections. and cost of aluminium sections

to be paid in relevant item)

23 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

(i) Coloured tinted float glass 6mm thick Heat

Strengthened substrate with reflective soft coating

on face # 2, + 12mm Airgap + 6mm Heat

Strengthened clear Glass of approved make having

211 i properties as visible Light transmittance (VLT) of 25 Sqm 41.06 3718.70 ₹ 1,52,671.23

to 35 %, Light reflection internal 10 to 15%, light

reflection external 10 to 20 %, shading coefficient

(0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree

Extra for openable side / top hung vision glass

panels (IGUs/laminated glass) including providing

and supplying at site all accessories and hardware

for the openable panels as specified and of the

approved make such as heavy duty stainless steel

friction hinges, min 4 -point cremone locking sets

with stainless steel plates, handles, buffers etc.

including necessary stainless steel screws/

fasteners, nuts, bolts, washers etc. all complete as

per the Architectural drawings, as per the approved

shop drawings, as specified and as directed by the

Engineer in- Charge..

Providing and fixing 12 mm thick frameless

toughened glass door shutter of approved brand

and manufacture, including providing and fixing top

& bottom pivot & double acting hydraulic floor

213 21.18 spring type fixing arrangement and making Sqm 46.35 5325.90 ₹ 2,46,839.49

necessary holes etc. for fixing required door fittings,

all complete as per direction of Engineer-in-charge

(Door handle, lock and stopper etc.to be paid

Providing and fixing Pull Handle back to Back

(Article code: 903.05.700) of Fixing 25mm dia

x300mm c/c, SS Matt with necessary screws etc.

complete as per direction of Engineer-in-Charge.

Providing and fixing Corner Patch Lock With

Cylinder (Article code: 981.50.030) , SS Matt with

necessary screws etc. complete as per direction of

Engineer-in-Charge.

Providing and fixing 12mm thk. Toughened float

glass glazing cut and fixed in openings of desired

shape as per drawing with 3/4" beveling all around,

fixed with the help of SS patch fittings, with top and

216 MRC-32 bottom 'C' channels, fixed firmly to the slab/ MS Sqm 53.34 5047.78 ₹ 2,69,238.88

Structure ,as directed by Engineer in Charge. Area

of openings to be measured). Assume frameless

glass. Rate of above item to include P/F of :

20x20mm "C" channel SS patch Fittings.

217 22.0 WATER PROOFING ₹ 0.00

Providing and laying water proofing treatment to

218 vertical and horizontal surfaces of depressed ₹ 0.00

portions of W.C., kitchen and the like consisting of :

(i) Ist course of applying cement slurry @ 4.4

Kg/Sqm mixed with water proofing compound

conforming to IS 2645 in recommended proportions

including rounding off junction of vertical and

horizontal surface. (ii) IInd course of 20mm cement

22.3 plaster 1:3 (1 cement : 3 coarse sand) mixed with

water proofing compound in recommended

proportion including rounding off junction of vertical

and horizontal surface. (iii) IIIrd course of applying

blown or residual bitumen applied hot at 1.7 Kg. per

Sqm of area. (iv) IVth course of 400 micron thick

PVC sheet. (Overlaps at joints of PVC sheet should

be 100 mm wide and pasted to each other with

bitumen @ 1.7 Kg/Sqm.)

220 MISCELLANEOUS ITEMS ₹ 0.00

24 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and Installing FLEXIBLE fluted panel for

curvilinear areas of thickness from 3mm to 12mm

as per approved design over and above existing

finished base. as per site requirement with all

accessories, corners and fitting complete in all

respect as per the direction of engineer in charge.

FABRIC PANELLING : Providing and fixing of the

fabric of Martindale (rubs) of minimum 30,000 rubs,

fixed in the Stretched Fabric gripper system. The

fabric to be fixed / glued to the perforated ply with

adhesive or gripper to be fixed on the perforated

board @ 1200x1200c/c or as per the design

approved. Further layering 12mm 500gsm non

222 MRC-34 woven thermal bonded polyester wool inside the Sqm 5.00 5498.87 ₹ 27,494.35

gap of the grippers. Frame work and ply paid

separately in item (Use corner grippers at the

corners / peripheral ends.) Item to include

aluminium U / T shape transition profiles (anodised

in desired colour as approved by architect).

Complete as per detail drawing and design. Fabric

colours and make as per approval.

Natural stone veneer panelling - Providing and

fixing decorative natural stone veneer panelling on

wall surfaces, consisting of 12 mm thick moisture-

resistant MDF base board fixed over existing

wall/partition with stainless steel screws and plugs

at 600 mm c/c, including necessary framing

wherever required to ensure true alignment. Over

the MDF substrate, 2–4 mm thick flexible natural

stone veneer sheets shall be fixed using

223 MRC-35 manufacturer-recommended polymer/epoxy Sqm 10.00 4066.39 ₹ 40,663.91

adhesive. Veneer shall be laid in

straight/continuous pattern (or as per design intent),

ensuring seamless joints and proper book-matching

where specified.

All exposed edges and corners to be finished with 2

mm veneer lipping, properly sanded and matched

with adjoining sheets. The entire surface shall be

sanded smooth and finished with clear PU

protective coating in matt finish, enhancing natural

Lacquered and Panelling

Glass ensuring durability.

: Providing and fixing

6mm/8mm thick lacquered glass (matte lacquered

glass, some in satin finish, mettalic, textured ,

printed lacquered glass in the basement , if

224 MRC-36 required) paneling having 12mm thick ply / mdf Sqm 15.00 8187.09 ₹ 1,22,806.30

backing over existing surface as per detail drawing.

The glass edges to machine polished & fixed with

natural silicon sealant of Dow Corning or approved

in joints complete as per design and drawing.

3D ACOUSTIC PET PANELLING: providing and

fixing smart acoustical wall panels with square

edges made of 100% polyester fiber substract

12mm thick with acoustical properties and with an

option of 12 colours as per the choice of the

architect /person in charge, providing a minimum

sound obsorption level of 0.80 NRC to be affixed to

225 MRC-37 wall using adhesives. The material should have Sqm 10.00 3250.39 ₹ 32,503.91

High Density – 2400g/m2 , asbestos free, non toxic,

non-imitant and recyclable. Material to have fire

resistance as per B1 standards. The sheets to have

V groove design approved by architect/ person in

charge (attached pic). cutting to be in done by

supplier using blade cutting as per requirement.

25 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing minimum 2.0 mm thick heavy-

duty decorative laminated sheet lining over existing

base as per approved design and pattern,

conforming to IS 2046, with synchronised texture

(syncro lam), manufactured using FSC-certified

kraft paper and UV Grade 7 paper, having density

not less than 1.37 g/cm³, of approved shade,

including the cost of approved quality adhesive and

matching edge band to be supplied and fixed by the

manufacturer, tested for gross heat of combustion

in accordance with ISO 1716, with the manufacturer

certified under ISO 9001 (QMS), ISO 14001 (EMS),

ISO 45001 (OHSMS), and FSC certification,

complete in all respects as per manufacturer’s

specification and direction of Engineer-in-Charge.

Providing and Fixing of 8mm Thick Coloured tinted

float glass of approved make for partition &

panelling etc as per the manufacturer's

specifications so as to achieve even, scratch free

finish of colour as specified or as approved. The

Glass Shall be edge polished on all sides and shall

be handled carefully to avoid

scratches/chips/jagged edges etc. and shall be

fitted in place using a layer of NONTOXIC SILICON

adhesive and/or SS Stud head Caps. The rate shall

be inclusive of all procurement, labour for laquering,

labour for fixing, transportation, edge polishing etc.

complete as per specifications to entire satisfaction

of Interior Architect/ Engg in charge.

Providing and fixing of Wallpapers adhesives

Composition : water-based ink printed vinyl coating,

cotton backing. Weight : ± 350 gr/m², ± 15 oz/yd¹.

Width : ± 130 cm, ± 51 inches. Flame

Retardancycertifications : EN 13501, B s1 d0 /

ASTM E84, A / NFPA 286. Sound absorption

certifications : ISO 354, alphaw 0.10. Vinyl +

26 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing fabric acoustic wall cladding -

Providing and fixing fabric-faced acoustic cladding

system to wall/column/partition surfaces, consisting

of stretched fabric finish over an acoustic infill

mounted on a rigid framework, as per drawings and

manufacturer’s specifications.

Framework: 48 mm GI C-Studs (0.55 mm thick,

flanges 34 mm & 36 mm) fixed at spacing not

exceeding 600 mm c/c, with 50 mm floor and ceiling

channels (0.55 mm thick, flanges 32 mm each), and

99 mm fixing channel (0.9 mm thick with two

flanges of 9.5 mm each) at horizontal joints.

Framework securely anchored to

wall/column/partition/floor/ceiling using galvanized

screws and plugs.

Base Layer: 12 mm thick BWR grade plywood fixed

229 MRC-41 on outer face of framework to receive acoustic infill. Sqm 73.91 8320.65 ₹ 6,14,937.80

Acoustic Infill: 25–50 mm thick resin-bonded glass

wool / mineral wool / PET wool (density 48–64

kg/m³), NRC ≥ 0.80, fitted tightly within framework

Fabric Finish: Approved make, colour, shade and

texture of acoustic stretch fabric (fire-retardant, fade-

resistant, acoustically transparent), stretched taut

over proprietary track system or adhesive fixing

method, ensuring wrinkle-free surface and neat

alignment at edges and corners.

Joints & Detailing: All fabric edges tucked into track

channels or neatly overlapped, with provision for cut-

outs for electrical/network points, switches, light

fixtures, skirting, and other services as shown in

The work shall be executed complete in all respects

Fixing oflabour, adhesives,

GRC Jali screws,

Reinforced Jali) 50 mm thick of required size,

pattern, design, and colour with 50% area covered

to be fixed on/between RCC / Block work Column or

structural steel work with Dry Fixing method. Fixing

of (Glass Fibre Reinforced Jali) GRC Jali to be

fixed on/between RCC / Block work Column or

230 MRC-42 structural steel work with Dry Fixing method with Sqm 25.00 12420.00 ₹ 3,10,500.00

appropriate steel frame work , using fasteners, and

necessary hardware etc in Building Facade. The jali

shall be securely fixed with stainless steel bolts and

anchor fastners(304 grade) of required size at

specified locations. The fixing shall be done by the

specialized approved agency as directed by

Engineer-in-Charge.

ACOUSTIC Pet lininng: Providing and fixing multi

layering of 9 mm PET panels to make 3d formation

as per approved with a density of min. 1800 GSM,

100% polyster fiber Min. 50 % recyclable and fire

rating - B1 class and NRC < 0.7, over existing base

of as per design. The shape and size shall be as

per the approved design and drawings complete in

27 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and applying of min. two or more coats of

ISO 9001:2015 and Z.E.D certified, premium, high-

performance nitrocellulose-based + tiny metallic

flakes (reflective particles) Evg. Duco coating

system of approved make with wet film thickness

(WFT) of 20 microns per coat and coverage 11.15

m²/liter/coat. It should be engineered for an

exceptionally smooth, mirror-like finish with high

scratch, chemical, and stain resistancesuperior

chemical resistance, extreme durability, industrial-

grade performance, UV resistance, anti-yellowing

durability, self-Leveling FlowCoat, should dry in min.

45 minutes after application, min. 1500 SCR and

industrial-grade protection, making it ideal for wood

and metal. The paint should have min. 7 years of

warranty and Hydro-Repel Technology in it for it to

long last on surface. The base should be prepared

by filling the gaps and cracks by filler putty followed

by applying a clear sp. nitrocellulose-based primer

to fill the holes then followed by 2-3 coats of evg.

duco enamel as per the manufacturer or OEM

guidlines. The paint hsould have a min. of 7-years

performance warranty on color retention, gloss

stability, and film integrity. All components must be

from the same manufacturer to ensure the quality of

the material. An authorization letter from the OEM

must be submitted before execution or as per the

direction of the Engineer-in-Charge.

Providing and applying of min. two or more coats of

ISO 9001:2015 and Z.E.D certified, premium, high-

performance nitrocellulose-based matte Evg. Duco

coating system of approved make with wet film

thickness (WFT) of 20 microns per coat and

coverage 11.15 m²/liter/coat. It should be

engineered for an exceptionally smooth, mirror-like

finish with high scratch, chemical, and stain

resistancesuperior chemical resistance, extreme

durability, industrial-grade performance, UV

resistance, anti-yellowing durability, self-Leveling

FlowCoat, should dry in min. 45 minutes after

application, min. 1500 SCR and industrial-grade

protection, making it ideal for interior and exterior

wood and metal. The paint should have min. 7

years of warranty and Hydro-Repel Technology in it

for it to long last on interior as well as exterior

surfaces. The base should be prepared by filling the

gaps and cracks by filler putty followed by applying

a clear sp. nitrocellulose-based primer to fill the

holes then followed by 2-3 coats of evg. duco

enamel as per the manufacturer or OEM guidlines.

The paint hsould have a min. of 7-years

performance warranty on color retention, gloss

stability, and film integrity. All components must be

from the same manufacturer. An authorization letter

from the OEM must be submitted before execution

or as per the direction of the Engineer-in-Charge.

28 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing of Indoor vibrant woven vinyl

wall covering with roll dimensions of 1.3/1.5meters

width and length of 15/ 30 meters size as per

company standard should be approved by architect.

1.2 MM to 1.5MM thickness to laid on hard,

levelled, smooth and moisture free wall substrate.

WOVIN wallcovering must be fire resistant,

234 MRC-46 Ecological, Chemical resistant, sound absorption Sqm 15.00 4729.76 ₹ 70,946.37

propertyand water retardent . Any joints in wall rolls

should be sealed with over lap joint .As per

approved shade and colour as per the satisfaction

of the Architect. Heavy duty adhesive Bartoline

wallcovering adhesive (Heavy Grade) to be used for

base of wall covering. with details as per technical

specifications.

Providing and fixing single extruded PVC louvers of

approved colour for ceilings, interior wall panelling,

etc. The louver base and PVC film shall be 100%

manufactured in India. The wall thickness of the

louver should be minimum 2 mm while the base

wall thickness should be minimum 3 mm. The

composition shall include virgin polymer, calcium

carbonate, natural fibres (such as wood powder,

rice husk, or wheat husk), and non-toxic additives.

Having Class A category resistance to spread of

flame criteria, and tested for gross heat of

combustion in accordance with ISO 1716.

Additionally, the louvers must be termite/borer

proof, water/moisture proof, and fire-retardant.

Providing and Installing PVD coated SS transition

profiles of thickness ranging from 0.8 mm to 1.5 mm

on wall or floor with width upto 25mm as per design

and approved drawings.

238 MRC-48 (b) Corner protection profile metre 20.00 2015.24 ₹ 40,304.84

240 MRC-48 (d) Tile edging profile metre 10.00 1855.65 ₹ 18,556.51

241 MRC-48 (e) Steps nosing prifile metre 5.00 2397.75 ₹ 11,988.77

DUCO FINISHED VERTICAL MEMBERS:

Providing & fixing of duco painted transition edges

at wall / partition edges, wrapping around openings

like Jamb / at lintels / at cills etc, formed of 11mm

HDHWR board finished with Duco paint (solid /

metallic colour) as per approved shade. Item to

include all necessary arrangements and necessary

hardwares, Complete as per detail drawing / as

approved by architect, rate should be inclusive of all

details as shown in drawing . For surfaces less than

Providing and fixing factory made 30 mm thick

WPC (Wood Polymer Composite) board grill with

700kg/m3 density, having 3D CNC routing of

approved design by the Engineer-in-charge, which

are machine cut for duct/shaft covering, partitions,

and facades. Fixing with stainless steel fasteners

and SS screws including all tools/tackles., all

complete as per direction of Engineer- In- Charge.

he rates including the cost of supporting framework

all around with finishing, fixing arrangement,

hardware, nails, etc. complete in all respect as per

detailed drawings for all lead & lift, all levels &

height, all floors. Support for top fixing need to be

taken from true slab."

29 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

HDHWR JALI:- Providing and fixing of 25 mm thick

3D CNC cut Jali as per approved sample / design

with frame all around the Jaali.The rates including

the cost of supporting framework all around with

finishing, fixing arrangement, hardware, nails, finish

etc. complete in all respect as per detailed drawings

for all lead & lift, all levels & height, all floors. jaali to

also have bronze mirror as per detailed drawings.

Support for top fixing need to be taken from true

Manual Twist Blinds - Providing & fixing of Twist

Window Shadings Blinds as per the sample shown

having room darkening fabric strip and sheer fabric

strips alternately in such arrangement as when light

filering strips overlap each other, it creates visibilty

and once the light filtering strips overlaps the sheer

ones, it creates the no visibility effect.It has bottom

rail made of aluminium alloy extruded profile,

powder coated and provided in fabric coordinated

colour. The rolling tube should be made up of

aluminium alloy from extruded profile of Ø34mm.

The fabric of this Blind should be made up of 100%

anti-static polyester vanes having light filtering and

sheer vanes to reduce glare. Sheer layers made of

white 100% knit polyester & the selection of colors,

textures and opacities as per Engineer-in-charge.

The FABRIC shall be constructed from spun-

bonded 100% polyester fiber, having Green guard

Certification treated with soil & dust repellant

require minimum regular interval cleaning. The

fabric has a maximum width of 2.80 M and a

thickness of 0.38mm (+ 5%) and having weight of

272g/m2 (+ 5%).The strip size is Solid 8.5 cm /

Sheer 6 cm. The shading to be operated by Easy

rise mechanism with a continuous cord loop

operating option. All plastic parts are in white color.

Installation to be done by quick release brackets

(wall or ceiling).

Manual Roller blinds - Providing and fixing Roller

Blinds as per the approved sample comprising of

Blackout fabric made up of 100% Polyester with

Acrylic form backing (PVC free) of thickness

0.65mm ±5% and weighing 350 gsm with openness

factor of 0% .The fabric is lead adn PVC free having

OEKO_TEX standard 100 certification.The Roller

blind system consists of 38mm OD extruded out of

Aluminium alloy 6063 T6 with silver anodized to

provide an everlasting finish and luster, the rotary

unit shall be 36mm in OD incorporating a clutch

mechanism composed of low – flexing braided

polyster cord with nylon core, Control Ball chain

shall be composed of braided nylon cord (2mm dia)

with high engineering grade plastic beads of 4.5mm

diameter mounted co-axially on the cord with a pitch

of 6.2mm (C-T-C) Bottom rail should be powder

coated Aluminium flat bottom rail of 290 gm to finish

it from the ends it should have rail end caps. The

clutch will be at the tube. The return end cap

bracket shall incorporate snap spring design to

facilitate easy installation and removal for

maintenance activities. The bracket shall be

finished with a flush mounting cover on each side

providing an aesthetic finish. It should handle up to

5 Kgs of material. The clutch should mount flush to

the face of the bracket which minimize the light gap

between the shade and the window frame.

30 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Supplying, Fabrication and Installation of solid

bendable Corian of upto 12mm thk. Applied on

walls or ceiling etc Joints should only be made with

joint Adhesive as per manufacture supplier of

Corian. All works done to the satisfaction of the

Architect/Project Manager. Note:- Work done

including labour, material wastage, time limits,

required hardware etc. Item also inclused the cost

of CNC cutting as per design - (basic rate of

material 7500 Sqm excluding GST)

Supplying, Fabrication and Installation of solid

bendable Corian of upto 12mm thk. for kitchen

platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade

laid over existing base. Joints should only be made

with joint Adhesive as per manufacture supplier of

Corian. All works done to the satisfaction of the

Architect/Project Manager. Note:- Work done

including labour, material wastage, time limits,

required hardware etc. Item also inclused the cost

of CNC cutting as per design - (basic rate 7500

Sqm excluding GST)

Providing and fixing customised graphic film pasted

over MDF board / wall / 12 mm thick bwr ply

including smooth surface preparation , designing &

249 MRC-56 development of graphics as per design intent Sqm 177.79 2230.43 ₹ 3,96,556.81

provided by architect, approval from architect,

pasting warranty of 24 months, complete in all

respect for all lead & lift, all levels & height, all floors

Polishing in high gloss/matt finish melamine clear

polish on wood work in required color/wooden

shade texture with following process in the

sequence as detailed below :

1. The surface to be polished is rubbed with sand

paper 80/120 no. and then with sand paper of

2. Applying two coats of sealer with spray gun and

allowing sufficient drying time for 1st coat and 2nd

coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery

cloth of finer grading with ample water to remove

excess sealer layer and make the surface further

smooth after this wet rubbing, then surface is

applied with special grade melamine fillers to fill all

250 MRC-57 the small and big holes/grooves etc. Filler coat to Sqm 52.33 3710.78 ₹ 1,94,175.14

be allowed to dry for 4 to 6 hrs on which again a

light wet rubbing is done this surface is further

allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied

with spray gun using melamine clear polish and

melamine thinner in required proportion. This 1st

coat is allowed to dry for 24 hrs then this dry

surface is again fine wet rubbed smooth, which is

further allowed to dry for 12 hrs. The final melamine

polish is applied with compressor pressure spray

gun using melamine clear polish and melamine

thinner mixed in required proportion complete as

per direction of Engineer-in-Charge. (Final coat to

be done in 1 or 2 layers without gap of time.)

31 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and applying of min. two or more coats of

ISO 9001:2015 and Z.E.D certified, premium, high-

performance Polyol + Isocyanate based Evg. PU

coating system formulated crystalshield surface

enhancer of approved make with wet film thickness

(WFT) of 40 microns per coat and coverage 11

m²/liter/coat. It should be engineered for an

exceptionally smooth, mirror-like finish with high

scratch, chemical, and stain resistancesuperior

chemical resistance, extreme durability, industrial-

grade performance, UV resistance, anti-yellowing

durability, self-Leveling FlowCoat, should dry in min.

60 minutes after application, min. 2000 SCR and

industrial-grade protection, making it ideal for

251 MRC-58 interior and exterior wood and metal. The paint Sqm 15.00 5731.44 ₹ 85,971.58

should have min. 7 years of warranty and Hydro-

Repel Technology in it for it to long last on interior

as well as exterior surfaces. The base should be

prepared by filling the gaps and cracks by filler putty

followed by applying a clear Sp. Epoxy primer

coating to fill the holes then the surface will be

prepared to apply 2-3 coats of evg. pu enamel as

per the manufacturer or OEM guidlines. The paint

hsould have a min. of 7-years performance

warranty on color retention, gloss stability, and film

integrity. All components must be from the same

manufacturer. An authorization letter from the OEM

must be submitted before execution, as per the

direction of the Engineer-in-Charge.

Extra for applying PU Polish over existing base with

one dimension less than 300mm.

253 Wooden sound slate Panelling 0.00 ₹ 0.00

Providing and fixing in position wall paneling of

grooved wood panels ESTO width 192mm,

thickness of 16mm and length 2440 mm made up of

high density fibre board with minimum density of

800 Kg/m3 substrate with a laminated facing as per

the approved shade/species & finish with melamine

balancing layer on the reverse side. The boards

shall have a special perforation pattern of 3 mm

grooves at 21mm pitch. The panels shall be highly

moisture resistant and have fire resistance of Class

I,BS 476 part 7.The edges of the panels shall be

“tongued-and-grooved” to receive special clips for

installation. The back of the perforated panels shall

have sound absorbing non-woven acoustical fleece

and backed with 50mm thick rock wool layer as

directed by the Engineer-in-Charge. The panels

254 MRC-60 shall be mounted on special channels using clips as Sqm 50.00 4235.00 ₹ 2,11,750.00

approved by the Engineer -in-charge. Install G.I

stud of section 48X34X36 mm or as approved by

the Engineer -in- Charge on the solid wall using

screws at spacing of 600mm centre-to-centre.

Screw the aluminum channel (keel) on channeled

G.I stud 600mm centre to centre. Install the first set

of wooden panels by inserting the clips. For border

channel insert the groove of the panel in to the

projecting flange of the clip. Continue installing rows

of panels by inserting the tongue into the groove of

the earlier inserted panel and progressively

installing clips for inside channel into the next

aluminum channel (keel) and simultaneously fill the

gap between wall & panel with 50mm thick rock

wool having density of 48 kg/m3. Continue the

process till the actual height is achieved. Use clips

for border channel to finish off the installation, finish

32 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing & Fixing 100mm thick stud partition which

includes double layer of tapered edge 12.5mm thick

Fireline (conforming to IS 2095 Part 1:2011,

Certified board) of size 1219x2438mm is screw

fixed to C-stud. 48x0.5mm C-stud {Material-IS 513,

Y/S-300Mpa, Finish - AZ150 (IS 15961)} placed at

610mm c/c in 50x0.5mm. {Material-IS 513,Y/S-

300Mpa, Finish - AZ150 (IS 15961)} floor and

ceiling channel. Floor & Ceiling channel is anchored

to the floor & True ceiling using Rawl plug

Ø8x45mm {Material-IS 513 CR1 grade, Zinc

coating, Pull Out Load-6.8kN for M30 concrete

grade} /Hilti anchor fasteners at 600mm c/c in

centerline. Floor channel to be wrapped with 70μ

Self Adhesive LDPE moisture barrier film to further

improve corrosion resistance performance. 12.5mm

255 MRC-61 thick Fireline strip of 50 mm width is placed Sqm 1299.78 4849.13 ₹ 63,02,817.30

between ceiling channel and RCC ceiling slab to

improve fire performance of the system. A noggin

channel {Material-IS 513,Y/S-300 Mpa, Finish -

AZ150 (IS 15961)} of 48x0.5mm width has to be

provided at the horizontal joints of the two boards.

First layer of boards to be screw fixed with drywall

screws of 25mm at minimum spacing of 600mm at

centre and 600mm at periphery. Second layer to be

screw fixed drywall screws of 35mm at minimum

spacing of 300mm at centre and 300mm at

periphery. 25mm glasswool slab of density 20kg/m³

shall be placed in metal framework. Glasswool

holding clip should be used to hold Glasswool slab

in its position. Finally square and tapered edges of

the boards are to be jointed and finished so as to

have a flush look which includes filling and finishing

DGUPro-Fill JointingLaminated

with Acoustic compoundPane

(HybridtoOption)

Providing and fixing double-glazed acoustic glass

partition system (DGU) consisting of 10 mm thick

clear toughened glass (outer pane) + 12 mm air

gap + 10 mm thick laminated acoustic glass (inner

pane: two 5 mm glasses bonded with 1.52 mm

acoustic PVB interlayer), factory-sealed to form an

overall unit thickness of 32 mm.

The system shall achieve minimum STC 42–46 dB

for sound insulation and shall comply with safety

standards ensuring no fall-out of glass fragments in

256 MRC-62 case of accidental breakage. DGU units shall be Sqm 5.00 19097.57 ₹ 95,487.83

mounted in powder-coated aluminium framework of

approved profile, sections minimum 100 mm x 50

mm, with concealed EPDM gaskets, aluminium

cleats, and suitable hardware.

Edges shall be sealed with silicone to provide

airtight and dustproof performance. Partition height

up to 3.0 m (unless otherwise specified), complete

with framework, anchoring to floor/ceiling, sealants,

scaffolding, cleaning, and protection of finished

surfaces till handover, as per approved mock-

up/sample and Architect/Engineer-in-charge

Providing and fixing HDHWR (High Density High

Water Resistant) board of 850kg/m3 density, tested

for gross heat of combustion in accordance with

ISO 1716, termite and borer proof, manufactured by

257 MRC-63 an ISO 9001 (QMS), ISO 14001 (EMS), and ISO 0.00 ₹ 0.00

45001 (OHSMS) certified company, complete in all

respects as per manufacturer’s specification and to

the satisfaction of the Engineer-in-Charge.

33 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

258 HDHWR Board

Natural fiber–reinforced composite board with

bendable properties suitable for curvilinear designs,

100% termite, fungus, and borer proof, 100%

waterproof, with high acoustic performance, tested

for gross heat of combustion as per ISO 1716, from

a manufacturer certified under ISO 9001 (QMS),

ISO 14001 (EMS), and ISO 45001 (OHSMS),

complete in all respects as per approved design

and to the satisfaction of the Engineer-in-Charge.

Flexiply plywood for curved surfaces, to bend and

mold into various shapes without losing structural

270 MRC-65 integrity. Plywood should boiling water proof (BWP),

termite and borer proof with E0 European standards

for formaldehyde emissions.

Providing & Fixing Frosted Translucent, cast

PVC, self-adhesive vinyl, special CRYSTAL-effect

film to reproduce Sand-blasting effect on

glass with customised designs, thickness of 2

mil (0.05mm) without adhesive & 3mil (0.8)with

adhesive having minimum tensile strength of 3.5

pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion

after 24hrs of installation should be 4

pounds/inch (0.7 kg/cm) on Acrylic, Glass

Polycarbonate: MCS warranty of 3yrs (if

exposed to direct sunlight) to 15yrs (indoors)

must be endorsed by 3M India Limited

Architectural Market Department. Contractors

payment wouldn't be released until & unless

he/she produces orginal warranty certificate from

the manufacturer.

The dimensions of the furniture as given in the

respective items as below are indicative and there

shall be no deviation of cost on account of this.

However the tolerance limit for such deviations in

sizes shall be limited upto 10% of any measurment

mentioned in the item.

34 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Low height storage Cabinet (Veneer finished)-

450mm deep x 750mm high:Storage to be formed

of 18mm HDHMR Hard wood board and finished

with 4mm thick approved shade of Veneer with

adjustable shelves made of 18mm thick

prelaminated HDHMR board with all exposed edges

finished with 2mm thick PVC edge band (factory

finished) as per details & architect approval.

Shutters of cabinet to be formed of 18mm HDHMR

Hard wood board finished with 4mm thk veneer on

outer surfaces and 0.8mm thick approved shade of

laminate inside. Rear backing of cabinet to be

formed with 12mm HDHMR Hard wood board

complete in all respect including 100mm high

veneer finished skirting as per approval/details.

Exposed wood veneer surfaces to be finished with

spray applied melamine polish. Storage to be

complete with hardware installed as per the

appoved model/make & as directed to consist of the

following: Shutter to have 2 nos of automatic spring

loaded hinge of approved make installed strictly a

per manufacturers guidelines with requisite

tools/jigs. Each set of shutters to be provided with

1no. multi purpose lock as specified, SS handles,

auto bolt, etc. (Hettich/Hafele make)

Basic price of Veneer @ Rs.685/ Sqmt+taxes

(front area to be measured from bottom i/c height of

leg/skirting to top of cabinet)

Supplying and fixing of LUXALON® V-6

Louvers in 84R Plain Panel manufactured by

M/s. Hunter Douglas India Pvt. Ltd. of approved

colour consisting of panel 84 mm wide x 16mm

deep x 0.6mm thick with round edges panel

length up to 6mtrs coil coated on a continuous

paint line double baked and roll formed from

enameled corrosion Resistance Aluminum Alloy

AA3005 /AA5050 for higher strength and good

Roll forming characteristics. Panels shall be

clipped at a distance of 111mm to baked

enameled Aluminium V-6 panel stringer 33mm

wide and 65mm deep x 0.95 mm thick in a

standard length of 5mtrs made of double baked

enameled AluminiumAlloy AA5050 (Al.Mg.)

white to hold the panel in a module of 86mm

centreto centre.Quality as per Taims standard

& pro green certification The prongs on V-6

stringers shall be to accommodate a gap of 27

mm between two panels as per enclosed profile

details. V-6 stringersshall be fixed at 150 mm

from panel ends and at a distance of

maximum900 mm center to center across the

panel span. The carrier shall be fixedto a

suitable structure by means of rigid fixing

details. All properties and specifications shall

comply with ECCA directives and more

specifically EN.

PAINT FINISH : Panel shall be finished with

polyster / exterior powder coated,in approved

P/F mirror 5mm thick mounted on 12mm marine

ply fixed on studs in toilets. The edges of the mirror

278 MRC-69 shall be chamfered and polished to achieve a neat SQM 55 3478.26 ₹ 1,91,304.35

look.the provision shall be made of providing the

lighting from the back.

35 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and applying Plaster of Paris punning of

average thickness 12mm to existing wall

surfaces/ceiling in true level and plumb complete as

Providing and fixing complete Concrete Grass

Pavers of approved design (grey), 60 mm

thickness to be laid on dressed earth surface as

per drawings and as instructed by site-in-

MDF Jali in S.S : Providing and making and fixing

as per detail drawing and reference image 18 mm

thick exterior grade MDF Jali fixing 35x 50 mm

Stainless steel frame as per suggested pattern

CNC cutting work complete. All wooden surfaces

finish with semi gloss PU finish The work shall be

281 MRC-72 done as per the specifications, sample approved Sqm 32.00 9130.43 ₹ 2,92,173.91

and as directed by the Architect and Engineer-in-

charge. The rate shall be for complete item

inclusive of all material, labor, wastages, necessary

tools & tackles, adhesives, consumable hardware &

required SS 304 grade hardware/accessories of

approved make. ( At all floor)

282 FABRIC PANELING

Providing& fixing in position wall panelling at all

heights of thickness 25 mm with Fiber Glass

Acoustical Wall Panels of size 600X600

/600x1200 mm CREDA, resin bonded square

edges having NRC of 0.9 minimum. The panels

should be manufactured from high density bio-

soluble resin bonded glass wool absorber

having density of 96 Kgs/m3 and wrapped on

the front side with an acoustically transparent

fabric having option of colours and fabric

options like jute etc. as per approved by

architect/engineer-in-charge, plain tissue

backer and fabric wrapped hardened edges.

Panels should have humidity resistance up to

90 %, thermal conductivity ≤ 0.03 (m² k / w)

thermal resistance ≥ 0.9 (m² k / w) & moisture

rate ≤ 1% (JC/T670 – 2005). The panel should

be fully recycled and fire retardant as per Class

A. The installation comprises surface impalers

having projecting elements called spikes shall

be fixed on the plain surface at 1200 mm center

to center horizontally and 600 mm center to

center vertically or as per approved by engineer-

in-charge, using self-tapping screws. Silica

based construction adhesive to be dabbed on

to the projecting elements (spikes) of the

impalers. Wall Panels shall be pierced through

the spikes of the impalers ensuring line & level

of panel are maintained. The panels should be

mounted on the impalers horizontally or

284 CORE CUTTING

36 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Drilling with core cutting machine in Post

RCC beams, slabs, floors etc. if not

mentioned in the drawing but required by

Project Manager for laying pipes and

rendering the same in RCC 1:2:4, finishing

the same to the satisfaction of the Project

Manager, including nominal reinforcement

wherever required, complete. The quoted

rate shall also include for providing EPOXY

based water proofing compound for sealing

the joints around the pipes. (Maximum

thickness of RCC members shall be

300mm for slab & wall , 600 mm for beam).

Providing and injecting approved grout in

proportion recommended by the

manufacturer into cracks/honey-comb area

of concrete/ masonry by suitable gun/pump

at required pressure including cutting of

nipples after curing etc. complete as per

directions of Engineer-in- Charge.(The

payment shall be made on the basis of

actual weight of approved grout injected.)

Epoxy injection grout in concrete/RCC work

of approved make

37 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing & laying Exterior Grade Textured

Finish (Natural Stone Finish): Thickness

1.3~1.6 MM Exterior grade Textured Finish

(Natural stone granules) shall be executed on

all exposed. surfaces of building as per the

architectural drawings. Shade and colour of

finish shall be asapproved by the Engineer in

charge. The work shall be carried out as per

manufacturersspecifications with appropriate IS

Codes and as directed by Engineer in charge.

Texture finish with natural stone crushed

powder mixed with pigmentation (0.01 % -

3.00%) applied over plastered surface within

plaster grooves. The texture is to applied overa

coat of Acrylic primer mixed with wall sealer

diluted with water in the ratio (1 primer:1wall

sealer:1 water) over the surface for better

adhesion of the texture with plasteredsurface.

1st coat of texture without chips to be applied

as base coat to give added strengthto the final

product which is to be applied with spray gun /

steel trowel. Second coat ofTexture is to be

applied with chips of stone powder having

available natural stone baseshade to be applied

with spray gun with 2hp pressure/ steel trowel

finished. Final coat ofsiloxane base protection

coat to be applied to make the product

completely water repellent / dust resistant / anti-

fungal which ensures with a warranty of 08

years on shades andsustainability. The

Providing and fixing Glass Reinforced Concrete

(G.R.C) Moulding in size of 175x155 mm in

approved colour of M/S UniStone make or

equivalent. The cornice should be made from

‘53 grade’ Cement manufactured by ‘JK

Cement’ or equivalent, Quartz, Fine Silica

Sand, Alkali Resistant Glass Fiber

manufactured by ‘N.E.G. JAPAN’ or equivalent,

Super Plasticizers manufactured by ‘BASF’ or

292 MRC-76 equivalent, Polymers manufactured by ‘BASF’ Rmt 250.00 3043.48 ₹ 7,60,869.57

or equivalent and U.V resistant Synthetic

inorganic pigments should be used for

pigmentation manufactured by ‘BAYFERROX

(Germany)’ or equivalent. The material casting

should take place in FRP Mould or equivalent.

The fixing of cornice should be ‘Dry fixing’ as

per the drawings approved by engineer in

38 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Counter with storage:Providing and fixing of

counter with storage cabinet formed of 18mm

thick prelaminated MDF board

formwork/carcass/adjustable shelves/shutters

with all exposed edges finished with 2mm thick

PVC edge band (factory finished) as per details

shown in drawing . Top of cabinet to be formed

of 19mm thick commercial plywood/board. The

storage also to have drawer pedestals made of

18mm thick prelaminated MDF board with all

exposed edges finished with 2mm thick PVC

edge band (factory finished) as shown in

drawing. Top of cabinet to be formed of 19mm

thick commercial plywood/board. Rear backing

of cabinet to be formed with 12mm thick marine

plywood. Counter top, facia and 200mm high

partial splash board to be finished with

Prepolished Granite Stone of approved shade

& make as per details. All laminate shades to

be of approved shade and colour. Cabinet to

have concealed dustbin behind flap door

formed of stainless steel in hairline finish as

approved.All exposed wood surfaces to be

finished with spray applied melamine polish.

Also to provide skirting in laminate finish as per

details. (Front area upto counter top to be

measured and paid for). Storage to be

complete with hardware installed as directed to

consist of the following: Shutter to have 2 nos

of automatic spring loaded hinge of approved

Full Height Storage (Laminate finish)-600

Providing and fixing full height storage cabinet

formed of 18mm plywood formwork/carcass

with adjustable shelves as per details.Shutter of

storage cabinet to be formed of 19mm

commercial board/plywood finished with 1mm

thick laminate of approved shade. All internal

surfaces to be post laminated with 0.8mm thick

HP laminate to approved shade. All external

exposed surfaces to be finished with 1mm thick

HP laminate to approved shade and all

295 MRC-78 exposed edges to be finished with 2mm thick Sqm 12.00 10434.78 ₹ 1,25,217.39

PVC edge band (factory finished) as per details.

Each set of shutters to be provided with 1 no

multi purpose lock as specified, 6mm thick SS

D type handles, auto bolt as per details.

Exposed wood surfaces to be finished with

spray applied melamine polish (front area to be

measured and paid for).Hardware: All hardware

shall be as per the appoved model/make

Room Signages (Stainless Steel with single

color/Multi color engravings)

39 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

MD Cabin/ HR & Admin/ Conference

room/Meeting Room/Cabin/Stationary/ Store

room/Server / ups /electrical room/G.Toilet &

Ladies Toilet with symbol/Pantry/Fire exist/rest

room or for anyother area as per the direction

of EIC. The SS plate of approximate size

297 MRC-79 200mmx400mm shall be 304 grade of Sqm 24.00 2434.78 ₹ 58,434.78

approved shape as per drawing. single

color/Multi color engraved signage Font and

letter sizing shall be got aproved by the

architect-sample shall be submitted. Rate shall

include all hardware and necessary

arrangement for fixing.

Supply of baffle made of 12 mm HD PET

panels (100x12,Center to center 112mm,ht

150mm)(as per customer size) with density of

2400GSM from 44 colour options as per the

designers requirement, the panel shall be made

-100% polyester fiber, with up to 60% recycled

fiber. size of panel 2800mm x 1200mm (±

Panel Should be anti fungal as per ASTM G:21

and also Non-toxic, non-irritant, and fire-

compliance with fire-compliance with safety

standards confirm as per BS 476 Part 6 (Fire

Propagation) & Part 7 (Surface spread of

flame) for interior applications. ASTM E84 class

A(Available on orders), ASTM D 2859, BS 5852

PART 1, EN 13501 part 1B,s1,d0.

The product should be 100% make in india and

OEM must have ISO CERTIFICATIONS-

complying to- IGBC membership

ISO 14184-2 (no formaldhyde)

ISO 9001 (Quality Mangement System)

ISO 14001 (Environmental Management

ISO 45001 (Ocupational helth & safety

management system)

Environmental Product Declaration(EPD),

Green Pro,ISO 14184-2(No Formaldehyde)

Declare- Red List Free,

Indoor Air Quality ( IAQ),

40 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Supply of 9mm (± 1mm) Embossed HD PET

panels with density of 1650GSM form 44 colour

options as per the designers requirement, the

panel shall be made with upto 60% post

consumer recycled content and are 100

recyclable size of panel 2760mm x 1200mm (±

Panel Should be anti fungal as per ASTM G:21

and also Non-toxic, non-irritant, and fire-

compliance with safety standards confirm as

per BS 476 Part 6 (Fire Propagation) & Part 7

(Surface spread of flame) for interior

applications. ASTM E84 class A(Available on

orders), ASTM D 2859, BS 5852 PART 1, EN

13501 part 1B,s1,d0.

Noice reduction coefficient (NRC) - Varies from

0.35 -0.45 with direct fix method and Thermal

conductivity ASTM C 518 upto 0.046 w/mK.

The product should be 100% make in india and

resistance to fungal growth As Per ASTM

OEM must have own manufacturing plant

along with ISO CERTIFICATIONS- complying

to- IGBC Membership,

ISO 14184-2 (no formaldhyde)

ISO 9001 (Quality Mangement System)

ISO 14001 (Environmental Management

ISO 45001 (Ocupational helth & safety

management system)

FIXED GLAZING (Single Glazed framing

system) : 10mm thick tempered glass

Demountable partition system with slimline

300 MRC-82 series with 45x25 section size with black SQM 120.96 5913.04 ₹ 7,15,241.74

powder coated finished gixed glazing & with

rubber gasket.. The rate shall be inclusive of

'I',"L" & "T" JOINT as per drawing.

Providing of slimline series glass door section

45x25 in black powder coated finish having

301 MRC-83 provision of 10mm thick tuffened glass to be

installed on floor springs, top bottom patch and

lock. H Handle of 600mm.

305 Total of Civil Work ₹ 5,46,54,447.75

Providing and fixing white vitreous china

extended wall mounting water closet of size

780x370x690mm of approved shape including

providing and fixing white vitreous china cistern

307 17.78 with dual flushing fitting,of flushing capacity 3 Each 15 14999.15 ₹ 2,24,987.25

litre/6 litre( adjustable to 4 litre/8 litres),including

seat cover and cistern fittings,nuts,bolts and

gasket etc. complete.

41 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing wash basin with C.I.

brackets, 15 mm dia CP Brass single hole

basin mixer of approved quality and make,

including painting of fittings and brackets,

cutting and making good the walls wherever

a) White Vitreous China Wash basin size

309 630x450 mm with a 15 mm CP Brass single Each 15 3960.55 ₹ 59,408.25

hole basin mixer

Providing and fixing kitchen sink with C.I.

brackets, C.P. brass chain with rubber plug, 40

mm C.P. brass waste complete, including

painting the fittings and brackets, cutting and

making good the walls wherever required:

White glazed fire clay kitchen sink of size

Providing and fixing 8 mm dia C.P. / S.S. Jet

with flexible tube upto 1 metre long with S.S.

triangular plate to Eureopean type W.C. of

quality and make as approved by Engineer - in -

Providing and fixing CP Brass 32mm size bottle

313 17.22A trap of approved quality & make and as per the Each 15 1034.80 ₹ 15,522.00

direction of engineer in charge.

314 17.34 Providing and fixing toilet paper holder

Supply & Installation of Twin Coat

Hook:Material:18-8 S, type-304, stainless

steel,Application:WC Cubicle Area,Warranty:1

year , Origin Made In India

Providing and fixing C.P. brass angle valve for

basin mixer and geyser points of approved

quality conforming to IS:8931.

Providing and fixing unplasticised P.V.C.

connection pipe with PTMT Nuts, collar and

bush of approved quality and colour.

320 18.74.2 15 mm nominal bore with 45 cm length Each 55 121.90 ₹ 6,704.50

Providing & fixing of C.P Towel ring, cost

inclusive of CP flange, fasteners, complete as

per manufacturer recommendation as per

approved specifications , Origin Made In India.

Supply & Installation of S.STEEL SOAP

DISPENSER (HEAVY TRAFFFIC) Container :

18-8 S, Type-304, Stainless Steel Material :

Non Corrosive Steel, Capacity : 400 ML,

Dispense Volume : 2 ML , Origin Made In India

Providing and fixing 600x450 mm beveled edge

mirror of superior glass (of approved quality)

323 17.31 complete with 6 mm thick hard board ground Each 15 1607.95 ₹ 24,119.25

fixed to wooden cleats with C.P. brass screws

and washers complete.

42 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Providing and fixing P.V.C. waste pipe for sink

324 17.28 or wash basin including P.V.C. waste fittings

325 17.28.2 Flexible pipe

Providing and fixing C.P. brass long body bib

cock of approved quality conforming to IS

standards and weighing not less than 690 gms.

Supply & Installation of Auto Closing System

Bib Cock, Range:Pressmatic Tap,Flow Rate

(Litre Per Minute),0.5 Bar:7.21,1.0 Bar:9.91,2.0

Bar:13.93,3.0 Bar:17.00 , Origin Made In India

330 INTERNAL WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing. This includes

331 18.8 jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases

and making good the same including testing of

joints complete as per direction of Engineer in

Concealed work, including cutting chases and

making good the walls etc.

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal stability

for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing

336 18.7 the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints

complete as per direction of Engineer in

337 Internal work - Exposed on wall

Providing and fixing gun metal gate valve with

C.I. wheel of approved quality (screwed end) :

Providing and fixing ball valve (brass) of

345 18.18 approved quality, High or low pressure, with

plastic floats complete :

348 MRP-5 40 mm nominal bore Each 2 2071.30 ₹ 4,142.61

Providing and fixing motorized valve with

349 MRP-6 sensor of approved quality, to complete the

350 40 mm dia ( Flushing Riser) Each 1 31170.43 ₹ 31,170.43

43 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

351 50 mm dia ( Domestic Riser) Each 1 31657.39 ₹ 31,657.39

Providing and placing on terrace (at all floor

levels) polyethylene water storage tank, IS :

12701 marked, with cover and suitable locking

arrangement and making necessary holes for

inlet, outlet and overflow pipes but without

fittings and the base support for tank.

Supplying, Installation, Testing and

Commissioning of uPVC pipes type -B

conforming to IS 13592 (1992) for soil, waste

and vent pipes including all fittings rubber ring

type (plain or with access door) e.g. bends,

353 MRP-7 junctions, cowls, offsets, access pieces,

jointing with rubber ring joints with lubricant etc.

fixed with clamps to walls with cement concrete

1:2:4 blocks complete in all respects. (For Soil

Providing, laying, Jointing, Testing and

commissioning of uPVC pressure pipes of

6Kg/Sqcm pressure rating class 5 (IS : 4985-

2000) including fittings, tees, bends, clamps,

coupling and adaptors supports, and jointing

with solvent joint, testing and necessary earth

355 MRP-8 work in excavation, backfilling, disposal of

surplus earth with a lead upto 50m complete,

compaction and consolidation Including laying

cement concrete 1:2:4 alround UPVC pipe

including bed concrete and thrust blocks at

bends as per standard design (For Soil &

Supplying, Installation, Testing and

Commissioning of uPVC, P or S trap of self

cleansing design with / without vent. arm

Setting in cement concrete 1:2:4 mix complete

including cost of cutting & making good the

Wall / Floors wherever required.

Providing and fixing floor drain with jali size

110X50 size inlet and outlet including cutting

and making good the walls and floors wherever

required complete in all respects.

Providing and fixing 125 mm dia, 3 mm thick

Stainless steel grating with frame for floor traps

or drains of required pattern including cutting

and making good the floors complete.

Providing and fixing cast brass Cleanout plug

with suitable insert keys for opening in brass

cap, male threaded joint/reducer with G.I.

socket caulked to Pipe/fittings of CI pipe

including cost of lead joints etc. complete in all

44 Digitally signed by Om Prakash

Sl No. Item No. Description Unit Qty Rate Amount

Making khurras 45x45 cm with average

minimum thickness of 5 cm cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded

stone aggregate of 20 mm nominal size) over

367 12.22 P.V.C. sheet 1 m x1 m x 400 micron, finished each 12 298.25 ₹ 3,579.00

with 12 mm cement plaster 1:3 (1 cement : 3

coarse sand) and a coat of neat cement,

rounding the edges and making and finishing

the outlet complete.450 X 450mm -

Providing and fixing on wall face unplasticised Rigid

PVC rain water pipes conforming to IS : 13592 Type

368 A, including jointing with seal ring conforming to IS :

MRP-13 5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

369 160 mm diameter (with all fittings) Metre 262.2 1188.70 ₹ 3,11,676.00

Providing and fixing to the inlet mouth of rain water

370 12.44 pipe cast iron grating 15 cm diameter and weighing Each 12 54.70 ₹ 656.40

not less than 440 grams.

371 Total Of Plumbing ₹ 17,81,272.23

373 SUBHEAD- I: DISTRIBUTION BOARD

Supplying and fixing following way, single pole and

neutral, sheet steel, MCB distribution board, 240 V,

on surface/ recess complete with tinned copper bus

374 2.3 bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including

earthing etc. as required. (But without

MCB/RCCB/Isolator)

Supplying and fixing following way, horizontal type

three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess,

377 2.4 complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder

painted including earthing etc. as required. (But