Providing GI Sheet Roof in Padipagam at Gandhiji Road, Kurichi in ward No.85, South Zone.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification.

Supplying and erecting SHUTTERING including necessary supports for plane surfaces in foundation and in all floors for RCC COLUMN etc., using mild steel sheets of suitable size and BG 10 stiffened with welded mild steel etc.,

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half M.sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") including cost of materials and labour charges etc., as per standard specification - 1m3

Supplying grill windows & Ventilators including cost of steel and labour charges for welding etc.,complete

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications.

Wiring with 2x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100 V grade insuitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5AFT switch with painting of suitable colour continuous earthwire connection of 1.5sq.mm copper wire t for concealed light / fan point SD 01

Wiring with 2x1.5sq.mm. PVCinsulated singlecore unsheathed FRLScopper conductor cable of 1100V grade insuitable heavy gauge MS conduitpipe onwall and ceiling with MS accessories with 150mmx100mmx75mm MSswitch box for 5A3 pinnon interlocking flush type CSplug wfth painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open plug point

Supply and run of 2of4sq.mm. PVC insulated SC unsheathed FRLS copperconductor of 1100V grade insuitable heavygauge MS conduit pipe concealed in wall and ceiling with continuous earthwire connection by 4sq.mm copperwire and making good of the concealed portion wiith suitable colour SD 45

Supply and run of 2 of 6 Sq.mm (84/0.3) PVC insulated SC Unsheathed CU.Condutor of 1100V on 7/20 GI bearer Wire for service connection Mains. SD 66

Supply and fixing of WT bulk head fitting suitable with guard and 15 W (100W) LED bulb (SD 85)

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification. (Sl.No.395)

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. (Sl.No.368)

Supply and fixing of 1200mm (48")AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD110

Supply and fixing of single box type 4"40W fluorescent fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube. SD 89

Supply and fixing of 4'40W twin streetlight fluorescent fitting complete with copper choke and condensor with 32mm dia GIpipe(Class'B')with 1No.32mm GIbend complete on the existing post/wall with 16Aaerial fuse unit on MSplate with PVC unsheathed copper leads with MS clarnps and aluminium painting with fluorescent tubes.

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other Approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tappingscrews,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Petty Iron works for Truss, straps including cost of steel and labour charges for welding etc., complete