Annual servicing for 380 KVA DG sets at Excise and Taxation Complex Solina Rambagh Srinagar

Amount

Complete Servicing of a 380 KVA Diesel Generator (DG) Set Scope of Work: Servicing Overview: Perform a full service on the 380 KVA Diesel Generator (DG) set. Utilize the B-check kit (N-14, Item No. 3238545) for the service. Tasks Included: Drain the existing engine oil (M-oil). Replace any damaged or worn-out filters and components. Service Interval: Service is required every 300 hours of operation or every 6 months, whichever comes first. Note: Ensure that all components are thoroughly checked and replaced as necessary to maintain optimal performance of the DG set

Components to be Replaced: Inner Air Cleaner Element (Part No: 3238358) Outer Air Cleaner Element (Part No: 3238358) HSN Code: 84212300 Tasks Included: Replace both the inner and outer air cleaner elements. Ensure the replacement of any choked or clogged elements. Note: Make sure to verify that the new elements are properly installed and functioning correctly.

Providing and filling of fresh Valvoline Premium Blue 7800 Plus M-Oil, as recommended by the OEM. The job Includes drain the old and used engine oil (M-oil).Properly transfer the drained oil to the concerned department in charge for disposal. Note: Ensure all old oil is handled and disposed of in accordance with environmental and safety regulations.

Pour a fresh supply of inhibitor and corrosion protection into the existing DG set.Drain the used inhibitor and corrosion protection before adding the new treatment. Note: This procedure should be carried out once a year to ensure optimal protection for the DG set.

Complete servicing of self-starter 24 volts by way of replacement checking of coil, mesh gear, solenoid switch. the job includes replacement of carbon brushes Note:his procedure should be carried out once a year for smooth starting of the engine.

Complete servicing of alternator by way of checking of brush holder, rotar assembly, starter, bearings, replacement of thimbles. The job includes replacement of its carbon brushes Note: This procedure should be carried out once a year for smooth battery charging.

Complete servicing of AFM panel by way of checking of contactor point sets , power relays VAC battery charger, fuel level, engine temperature , P.F , hour count . Note: This procedure should be carried out once a year for smooth auto starting .

M/s Bhat Engineering Works

BHAT SALES CORPORATION