Procurement of 1.5T windows, 1.5T and 2.0T split and 3T tower AC machines for use at different area of KTPS.

Amount

AIR CONDITIONER, WINDOW TYPE, CAP: 1.5T Additional Data: Make :Bluestar/Carrier/Daikin/Hitachi/Voltas The machine should be non-inverter type and category minimum 3(three) Star or more. Non Inverter type,Copper Coil, BEE Rating: 3 star minimum, Refrigerant:R 32/R-410 or higher grade, Compressor: Rotary, Remote Controlled Note: 1.Test certificate is must with supply of material 2. Supply of Water drain pipe, 16Amp Plug Top, Remote Battery etc. are under vendor scope.

AIR CONDITIONER SPLIT TYPE CAPACITY:1.5T FORROOM AC Additional Data: Make :Bluestar/Carrier/Daikin/Hitachi/Voltas The machine should be non-inverter type and category minimum 3(three) Star or more. Non Inverter type, Copper Coil, BEE Rating: 3 star minimum, Refrigerant: R 32/R-410 or higher grade, Compressor: Rotary, Remote Controlled Note: 1.Test certificate is must with supply of material 2. Supply of Thee(03) Meter interconnecting Copper Tubes(1/2” &1/4”) of Indoor-Outdoor unit, Water drain pipe, Tube insulation taping, 16Amp Plug Top, Remote Battery etc. are under vendor scope.

TOWER AC, 3 TON, 415V, 3PH Additional Data: Make :Bluestar/Carrier/Daikin/Hitachi/Voltas The machine category minimum 3(three) Star or more. Non Inverter type, Condenser coil: Copper, Refrigerant: R 32/R-410 or higher grade, Compressor: Rotary, Filter: Anti dust, Cooling Ambient temp>50deg C, Noise level(Indoor):< 52dB, Operation: Remote Controlled, Power Supply: 415V/3Ph/50 Hz,

WALL FITTINGS FOR OUTDOOR UNIT,SPLIT AC NECESSARY WALL FITTINGS FOR OUTDOOR UNIT OF SPLIT TYPE AIR CONDITIONER MACHINE (INCLUDING NUT-BOLT & CLAMP) Additional Data: STANDARD

Installation & Commissioning of 3TR AC Installation & Commissioning Service charge should include fabrication & fitting of stand of indoor and outdoor units with supply of necessary hardware as per requirement along with installation. Consumables like R-32/R-410 Refrigerant and any other required if any is under vendor scope. Again, arrangement of tools & tackles are also under Vendor scope.

Installation & Commissioning of Windows/ Split AC Installation & Commissioning Service charge should include fabrication & fitting of mounting arrangement of indoor and outdoor units in case of split/ single unit in case of windows with supply of necessary hardware as per requirement along with installation. Consumables like R-32/R-410 Refrigerant and any other required if any is under vendor scope. Again, arrangement of tools & tackles are also under Vendor scope

Fitting Dressing Saddling of Tower AC Laying, dressing and saddling of interconnecting accessories between indoor and outdoor units with supply of following items: Copper pipes 5/8 “and 3/4 “(Thickness should be minimum 0.8 mm), Nitrate Rubber of Thickness 9mm to cover the entire copper tube, water drain pipe (Dia-5/8 inch, nylon braided) , 4 Core Copper Cable 2.5 mm (Make-Polycab/Havells), rapping tape etc

Fitting Dressing Saddling of Split AC Laying, dressing and saddling of interconnecting accessories between indoor and outdoor units with supply of following items: Copper pipes 1/2 “and 1/4 “(Thickness should be minimum 0.8 mm), Nitrate Rubber of Thickness 9 mm to cover the entire copper tube, water drain pipe (Dia-5/8 inch, nylon braided) ,3 Core Copper Cable 2.5 mm(Make-Polycab/Havells), rapping tape etc.

Haldia Aircon (BID ID -6212868)