SPECIAL REPAIRS TO 12X TOILETS BATHROOMS OF OTM BLDG NO 37 AND PROVISION OF CERTAIN MINOR WORKS AT MCEME AREA UNDER GE MCEME SECUNDERABAD

Amount

Demolition of brick work of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius in half brick thick wall, built in CM 1:4 complete all as specified and directed.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for cement plaster 1:3, 5 mm thick incl finishing even and smooth without using extra cement on ceiling complete all as specified and directed.

M&L for Preparation of new decorated surfaces of ceiling and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and applying two coats of oil emulsion distemper (OBD) complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles and steel peg stay complete painting with glazing bars dovetailed or welded and ht up to 12.0 m all as specified and directed by Engineer in charge

S&F Figured glass, ordinary quality and glazing with oil putty /wdn beads in square n.exc.0.50sqm in each pane 4 mm thick plain glass on new or old windows incl hacking out old complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of OBD over a coat of primer over and including 2 to 3 mm wall care putty finish including preparing the new plastered wall surfaces complete all as directed by Engr-in-charge

M&L for complete removal of existing surfaces and applying two coats of oil bound distemper over and including a coat of alkali resisitant primer and including one coat ( 2mm thick) wall care putty complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exc 1.50 Sqm not exceeding 4.00 Sqm each complete all as specified and directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed complete all as specified and directed.

M&L Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and directed.

S&F 100 mm long Stainless Steel butt hinges medium weight cold rolled and mild steel hinge pin complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F extruded aluminium anodised handle 125 mm fabricated type polished and fixed complete all as specified and directed.

M&L for 200 mm Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Aluminium ( Die cast ) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and all as specified and directed by Engineer in charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing srviceable tiles to store and rubbish off the premises complete all as apecified

M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of mortar in cement mortar 1:6 for lying floor finishes complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 finished rough to receive wall tiles etc. complete all as specified and directed.

M&L for Glazed ceramic tiles 450X 300X 7mm thick on vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demoltion of cement Concrete of any description and in any position not otherwise specifically provided complete all as specified and as directed by Engr-in-Charge.

M & L Rendering 15mm thick in CM (1:3) on sunken concrete floor surfaces mixed with integral water proofing compound finished even & smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid separately

M & L for PCC 1:4:8 type D2 using 40mm using graded stone aggregate as in foundations, filling in sunken portions and mass concrete complete all as directed by Engr-in-charge.

M&L for 25mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in (sunken floors/ WC area ) complete all as directed by Engr-n-Charge.

M&L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surfaced by forced applicaion complete all as specified including removal of existing treatment complete all as specified and as directed by Engr-in-Charge.

Supply only Integral water proofing compound complete all as specified and directed.

S&F in repairs vitreous China wash down water closet pan (Pedestal Pattern) white, including fixing bolts, plastic water closet seat, black, closed pattern, solid type with flat bottom and cover and mild steel chromium plated hinging device, provision & connection to P/S trap including connection to flushing cistern etc complete all as specified and as directed.

S & F in repairs, vitreous china squatting pan, 'orissa' pattern of size 580x440mm white, with integral foot rests including concrete bedding & inc. CI 'P' trap, 100mm, complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs complete all as specified and directed.

Taking up or down, 20mm dia bore, GI tubing, medium grade, complete all as specified and as directed by Engineer-in-Charge.

S&F 20mm dia for high density polythelyne pipes (CPVC) of pressure rating 06 kgf/cm2 fixed concealed in wall or laid in floors etc. complete all as specified and directed.

S&F white colour Under Counter Wash Hand Basin of size 590x420x195mm complete all as specified and directed. Cat Part No. CNS-WHT-705 of Jaguar or equivalent.

Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

S&F 15mm dia for high density polythelyne pipes (CPVC) of pressure rating 06 kgf/cm2 fixed concealed in wall or laid in floors etc. complete all as specified and directed.

S&F in 15mm bore Fancy type pillar tap, long shank (swan neck), Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore Bib taps fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 750mm complete all as specified and directed.

S&F 15mm dia brass Stop valve screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half stall type, white all as specified including flushing pipe and waste pipe in repairs complete all as specified and directed.

S&F Chromium plated 15mm, stop valves/ angle cock (Push type), cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe for urinals complete all as specified and directed.

M&L Granite (of any type) slab 18- 20mm thick machine cut, with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing types and fixing to wall for urinal partition complete all as specified and directed.

S&F for chromium plated urinal spindle spreader 15mm fix to urinal complete all as specified and directed by engineer in charge.

S&F CP hand shower (Health faucet) (ABS Body) with 15mm dia, 1.2m long flexible tube & wall hook complete all as specified and directed.

S&F CP shower rose 125 mm size with swivel joint fixed in repairs complete all as specified and directed.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs, PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) 100/110mm in repair bore single socketed pipes in any length with rubber ring joints fixed to wall / floor/ to trap with pvc clamps complete all as specified and directed.

S&F in PVC(SWR) bend/shoe for 100/110 mm dia complete all as specified and directed.

Cutting into existing manholes for connecting new 150mm drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 200/225mm dia pipe complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard rock, complete all as specificed and directed by Engineer-in-Charge.

Excavating over areas, n exc 1.5 m deep and getting out in hard / dense soil, complete all as specificed and directed by Engineer-in-Charge.

Excavating over areas, exc 1.50m deep and n exc 3.00 m deep and getting out in hard rock, complete all as specificed and directed by Engineer-in-Charge.

Excavating over areas, exc 1.50m deep and n exc 3.00 m deep and getting out in hard / dense soil, complete all as specificed and directed by Engineer-in-Charge.

Excavation in trenches in hard / dense soil n.exc 1.5M wide and n.exc 1.5M in depth for foundation, complete all as specificed and directed by Engineer-in-Charge.

Excavation in trenches in hard rock n.exc 1.5M wide and n.exc 1.5M in depth for foundation, complete all as specificed and directed by Engineer-in-Charge.

M&L Brickwork with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface on wall, finished even and smooth (without using extra cement), complete all as specified and directed by Engineer-in-Charge.

M&L RCC type B1 (1:2:4) using 20mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slabs set in CM 1:6, complete all as specificed and directed by Engineer-in-Charge.

M&L Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally including mild steel wire not less than 0.9 mm dia or securing with clips, complete all as specificed and directed by Engineer-in-Charge.

Formwork to, rough finished surfaces of flat concrete,soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping),etc complete all as spd and directed.

M&L salt glazed stoneware drain pipes laid in trenches & jointed as specified of 150mm dia complete all as specified and directed.

M&L Concrete bed to drain pipes of 150mm dia bore in PCC 1:3:6 type C-2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested including conection to man hole complete all as specified and as directed

M&L PCC in coping, type B1 (1:2:4) using 20mm graded aggregate, including necessary formwork complete all as specificed and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in any type of soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point, complete all as specificed and directed by Engineer-in-Charge.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specificed and directed by Engineer-in-Charge.

M&L 150mm reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.

M&L 200mm reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specificed and directed by Engineer-in-Charge.

M&L for concrete bed to 200mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in, complete all as specificed and directed by Engineer-in-Charge.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, 150mm dia, complete all as specified and as directed by Engineer-in-Charge.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / Hylam sheet/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down unserviceable sub main wiring of any size two/foue single core including earth wire and PVC conduit/ casing capping and removing materials from site and making good the disturbed surface of wall etc complete all as specified and directed

Material and labour for point wiring in concealed conduit with single core PVC insulated unsheathed 1100 volt grade cable with multistranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked of suitable dia conduit wiring in walls/PVC conduit on wall including Tee, Junction boxes and provision of 2.0mm thick MS terminal boxes duly painted with red oxide metal primer and covered with 3 mm thick sheet cover of suitable size including suitable screws with washer for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC insulated unsheathed 1100 Volts grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to common earth dolly complete all as specified & as directed for One light point controlled by one, one way switch 5 amps, SP

All as per item No. 79 above but for one exhaust fan point controlled by one, one way switch and regulator complete all as specified and directed.

All as per item No. 79 above but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed.

All as per item No. 79 above but for one 3 point 5 Amps switch socket outlet point controlled by other switch on the same board complete all as specified and directed.

All as per item No.79 above but using 4.0 Sqmm single core copper conductor cable multistranded PVC insulated unsheathed 1100 volts grade for 3 pin 15 Amps switch socket combination point including running 4.00 Sqmm copper conductor PVC wire as earth continuity conductor on independant board complete all as specified and directed.

Supply and fixing of switch piano , single pole one way, flush type 5 Amps capacity 230 volts complete all as specified and directed.

Supply and fixing of switch socket combination 2 in 1 multipurpose 2/3 pin 5 amps flush type complete all as specified.

Supply and fixing of socket outlet 2 in 1 multipurpose 2/3 pin 5 amps flush type control by other switch complete all as specified and directed.

Supply and fixing switch socket combination 2 in 1 multipurpose 3pin 5/15 amps flush type complete all as specified and directed.

Supply and fixing of ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed.

Material and labour for Submain conduit wiring with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade including one run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified and as directed.Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length.

Supply and replace MCB double door DB SPN 8 way with 200 Amps busbar including removing the existing unserviceable one and making good the distrubed surface to match with the existing surface complete all as specified and directed. Standard/C&S/Havells

Supply and fix in repair MCB SPN 32 Amps 240 volts for fixing on MCB DB complete all as specified and directed.Standard/C&S/Havells

Supply and fix in repair MCB SP 6 to 32 Amps 240 volts for fixing on MCB DB complete all as specified and directed.Standard/C&S/Havells

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old light fitting all as specified and directed . Make: Havells/CG/C&S/Philips/Shakti Fixtures

Supply and fixing surface type 1'x1' LED light fitting with mounting LED luminaire suitable for surface fitting and including electronic driver and connection from ceiling rose to light with suitable wire complete all as specified and directed. Make: Havells/CG/C&S/Philips/Shakti Fixtures

Supply and fixing exhaust fan 300 mm sweep, iron body heavy duty single phase 50 Hz, 1400 rpm AC with louver and connecting up with and including provision of PVC insulated copper flexible cord of size 23/0.019, 3 core electric connection from ceiling rose exhaust fan complete all as specified and directed.

S & fixing socket outlet 6 A 2/3 pin flush type complete all as specified and directed.

Supply and fixing MCB double door DB SPN 4 way with 200 Amps busbar all as specified and directed. Make: Standard/C&S/Havells

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed . Make: Havells/CG/C&S/Philips/Shakti Fixtures

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed . Make: Havells/CG/C&S/Philips/Shakti Fixtures

Supply and fixing Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED bulb of 10 W complete all as specified and directed . Make: Havells/CG/C&S/Philips/Shakti Fixtures

M&L Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, checknuts and washers all as shown in Electrical Plate No.3 of SSR Part-I and connected to main switch board including excavation and earth work, PCC chamber in 1:3:6, RCC Cover in 1:2:4 type B-1 reinforced, 20 mm dia medium grade GI pipe with funnel and wire mesh complete and watering arrangement all as specified. (Note: GI pipe 15mm dia, GI wire 4mm dia upto 7.5m deemed to be included in quoted rate.) complete all as specified and directed.

BHEEMRAO PATIL CONTRACTOR

M/S DIVIJA BUILDERS

Satish Patpally

SAI RUPA CONSTRUCTIONS