Construction of balance work of Govt. Degree College Jakhora Lalitpur

CONSTRUCTION OF INTERNAL ROAD

Supply and filling of Loose earth/ soil in Base of Road

Proiding and fixing PCC Kerb stone in Road side Edging 0.30x0.15x0.45m deep

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer in-Charge. ith material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.

Two Coat Enemal Painting oVer Kerb stone Edging

ProViding and filling Moorum soil in Patri bot side

ConstruCtion of SurfaeDrain 0.45x0.60m size

Earth work in ExaCation in foundation

Lean Conrete in 1:4:8 in base

BriCk work in Drain in1:4 Cement:sand mortar

PCC in 1:2:4 top layer oer wall and base

20mm Plaster in 1:3 Cement sand mortar witH neat Cement finisH

BAcK FILLING OF Excavted earth

HORTICULTURE WORK(UDYANIKARAN)

Supply and filling Fertile Earth For Horticulture Park

LeVelling and dressing work Park and Hortiulture

Proiding and fixing tree plantation inluding exCaation of pit 1.20x1.20x1.20m size and filling fertile earth and compost khad 20% excavation in kankar soil

Supply and filling fertile earth and mixing

Proiding and fixing tree plantation inluding exCaation of pit 1.20x1.20x1.20m size and filling fertile earth and compost khad 20% Proiding and Mixing Compost fertilizer20% mixing of fertile earth in park

Proiding and fixing tree plantation inluding exCaation of pit 1.20x1.20x1.20m size 20% compost khad

Supply and fixing PALM TREE-5 feet HigH

Supply and fixing ASHOK PENDULA TREE-4 feet High

Supply and fixing KADAM TREE-3 feet high

Proiding and fixing AMERICAN DUB GRASS

MaintinanCe work IRRIGATION of plants and Grass upto 12 month and Handing to Client Hire Unskilled (MALI)Labour 8 montH -21no per day Left month of rainy season

Making Assembly Ground 30.00x30.00m

Earth work in cutting Hard rock avarage cutting 0.45m

Lean concrete in 1:4:8 in foundation Toe wall

RCR Stone masonery work in 1:6 c:sand mortar

PCC in 1:2:4 top of Toe wall

Supply and Laying GSB

Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Construction of CYCLE STAND 15.00x4.50m

Earth work in Excavation in foundation

Lean concrete in foundation in 1:4:8

RCC work in 1:1.5:3 in foundation

Providing cutting bending MS Bar reinforcement

Brick work in 1:6 c:sand mortar in foundation

Sand filling under floor

Lean concrete under floor in 1:4:8

40mm PCC Flooring in 1:2:4

Providing and fixing Glass Stirups in floor

Providing and fixing MS Tublar Cycle stand structure

Providing and fixing Profile sheet Roofing

Painting two coat enemal Paint over steel fram

Fire Hydrant System

Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees flanges tapers, nuts bolts, gaskets etc. in ground including welding excavation & providing cement concrete blocks as supports, anticorrosive treatment With coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required, 150 mm. Dia

Supply & fixing of welding Heavy Quality Class 'C', MS pipe conforming to IS:1239 (part-1) for pipes up to 150 mm dia and IS: 3589-1991 for pipes above 150 mm including cutting, threading, welding, clamping fitting with elbow, socket nipple, clamping with MS angle iron supports and fasteners etc. also painting with red oxide and PO red enamel paint with required wrapping Coating complete in all respects. 65 mm

Supply & fixing of welding Heavy Quality Class 'C', MS pipe conforming to IS:1239 (part-1) for pipes up to 150 mm dia and IS: 3589-1991 for pipes above 150 mm including cutting, threading, welding, clamping fitting with elbow, socket nipple, clamping with MS angle iron supports and fasteners etc. also painting with red oxide and PO red enamel paint with required wrapping Coating complete in all respects. 80 mm

Supply & fixing of welding Heavy Quality Class 'C', MS pipe conforming to IS:1239 (part-1) for pipes up to 150 mm dia and IS: 3589-1991 for pipes above 150 mm including cutting, threading, welding, clamping fitting with elbow, socket nipple, clamping with MS angle iron supports and fasteners etc. also painting with red oxide and PO red enamel paint with required wrapping Coating complete in all respects. 100 mm

Supply & fixing of welding Heavy Quality Class 'C', MS pipe conforming to IS:1239 (part-1) for pipes up to 150 mm dia and IS: 3589-1991 for pipes above 150 mm including cutting, threading, welding, clamping fitting with elbow, socket nipple, clamping with MS angle iron supports and fasteners etc. also painting with red oxide and PO red enamel paint with required wrapping Coating complete in all respects. 150 mm

SITC of Butterfly Value PN-16 slim seal standard lever operated type as per design standard IS:1395 or BS:5155 with required flanges,nut,bolts etc. Complete in all respects. 80 mm

SITC of Butterfly Value PN-16 slim seal standard lever operated type as per design standard IS:1395 or BS:5155 with required flanges,nut,bolts etc. Complete in all respects. 100 mm

SITC of Butterfly Value PN-16 slim seal standard lever operated type as per design standard IS:1395 or BS:5155 with required flanges,nut,bolts etc. Complete in all respects. 150 mm

SITC of dual plate Non Return Value of following sizes PN-10 as per design standard IS:5312 or BS:1868 with companion flanges, nut, bolts etc. Complete in all respect. 80 mm

SITC of dual plate Non Return Value of following sizes PN-10 as per design standard IS:5312 or BS:1868 with companion flanges, nut, bolts etc. Complete in all respect. 100 mm

SITC of dual plate Non Return Value of following sizes PN-10 as per design standard IS:5312 or BS:1868 with companion flanges, nut, bolts etc. Complete in all respect. 150 mm

Supplying and fixing of first aid hose reel with M S construction spray painted in post office red, conforming to IS:884 complete with the following as required : 20 mm nominal internal dia water hose thermoplastic(Textile reinforced) type - 2 as per IS:12585. 20 mm nominal internal dia gun metal globe valve and nozzle. Drom and brackets for fixing the equipment on wall. Connections from riser with 25 mm dia stop gum metal valve and M S pipe and socket. 40 Metre

Supplying and fixing of Air Vessel made of 250 mm dia, 8 mm thick M S sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required .

Supplying and fixing of 63 mm dia, 15 Metre long RRL hose pipe with 63 mm dia male and female couplings duly bound with G I wire, rivets etc. confirming to IS:636(type - A) as required : stainless steel Grade (304)

Supplying and fixing of 63 mm dia short branch pipe with 20 mm nominal internal daimeter size nozzle confirming to IS:903 suitable for instantaneous connection to interconnect hose pipe coupling as required stainless steel Grade (304)

Supply and fixing of Cast iron body 63 mm dia male instantaneous intel coupling with housing cabinet (500X400X400 for 2 way and 600X400 for 4 way) cap and chain for fire brigade correction conforming to IS:904 and making connection with fire fighting pipe or underground water tank completing the work in all respect as per the directions of the Engineer-in-charge. (FIRE BRIGADE CONNECTION) 4 Way - 150 mm dia M S Pipe

Supply, and Laying of copper conductor cable 2X1.5sqmm. complete the system. (Make: Polycab/Paradise/National/ Seiko/other isi).

Supplying and fixing of internal/External hydrant valve with instantaneous Gunmetal / Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked confirming to IS:5290 (Type -A) with blank Gunmetal / Stainless Steel cap and chain as required ; Single headed Stainless Steel.

Supplying and fixing of Pressure Switch in M S pipe line including connection etc. as required.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(Civil DSR-2023)

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS: 1520 (C) Suitable HP squirell cage induction motor TEFC type suitable for pperation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F insulation, conforming to l$-325 (D) M.S. fabricated common base plate, coupling, coupling guard foundation bolts etc. as required (E) Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m Head

Wiring for Circuit/Submain wiring along with earth wire with the Following size FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire

Supply & Laying of 25 mm x 3 mm G.I. Strip from earth electrode directly in the ground as required complete in all respect.

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000 mm, Outer Dia 50 mm, inner Dia 25, terminal Dia 12 mm, outer G.I. pipe of 16 swg and inner G.I. pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25 mm x 3mm G.I. strip upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.

S&L of 1800 mm x 900 mm x 12 mm thick chequered rubber matting of tested quality.

SITC of Automatic priming Arrangement for all fire pump including necessary pipe, fitting, water level controller, 1 HP pump etc. complete in all respect.

SITC of pressure Gauge ranging from 0 to 14 kg. per sq.mm ISI marked from approved manufactures complete in all respect.

SITC of Fire Hose cabinet box made out of 18 gauge MS sheet including two coats of post office red paint over one coat of primer with 4 mm, thick glass door in front painted "FIRE" in red luminous paint. The size of the box should be 750 mm X 600 mm X 250 mm size capable of accommodating a pair of hose with coupling and nozzle. The box should be floor mounted type with railway coach lock arrangement and lever for opening the door after breaking the glass complete.

Supply & Laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. Including excavation and refiling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

16 sq.mm x 4 core.

70 sq.mm x 3½ core.

SITC of 25 mm Ball valve PN-1 gunmental as per IS:778 including necessary accessories and connections.

S/F of GM Foot Valve Make:- Kalpna/Aarko/Sir / Kartar/ Kirloskar * 100 mm

S/F of GM Foot Valve Make:- Kalpna/Aarko/Sir / Kartar/ Kirloskar * 150 mm

S/Making of shed for terrece pump.

Providing, fixing, testing & commissioning of Fire Man Axe on top of the hose box for each shaft conforming to IS:926 as required.

Fire Alarm System

Supplying, installation, testing & commissioning of intelligent analog addressable photo thermal detector complete with mounting base complete as required.

SITC of Manual call point break glass type housed in MS sheet, including connection Make-Agni/ Daksh.

SITC of Electronic LMT Hooter, housed in MS housing suitable for wall mounting /ceiling, including making connection (Agni /Alpha Daksh)

Supply , Installation , Testing and Commissioning of response indicator on surface / recess M S box having two LED metallic cover complete with all connections etc. as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supply, and Laying OF copper conductor cable 2X1.5sqmm. complete the system. (Make: Polycab/Paradise/National/ Seiko/other isi).

Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Wiring for light / power plug with 2 x 4.00 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 1 No. 4.00 sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.

Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge.

S&F of Fire extinguisher, ABC Type 6.00 Kg. capacity (ISI marked IS: 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of CO2 type Fire extinguisher, 4.50 Kg. capacity (ISI marked IS: 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply, Installation, Testing & Commissioning of Monitor Module (Make: Morley/GST/honeywell-Farenhyt).

Please Enable Macros to View BoQ information