Construction of Cremation Shed (Interlocking Paver Block, Toilet and Granite Bench) Near Vellore New Bus stand in Ward No.17, Zone-IV at Vellore Corporation

Amount

Removal Mosaic-in-situ finish in cement mortar in flooring and in wall surface including cost of all labour and material charges etc., complete as per standard specifications W-0041 -PWD SoR 2025-26

Earthwork open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the excavated earth within the compound in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and leveling etc. complete complying with standard specification (FOOTINGS)

Earthwork open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and depositing the excavated earth within the compound in places shown by departmental officers with an initial lead of 10m and lift of 2m and clearing and leveling etc. complete complying with standard specification (GRADE BEAM )

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc.including all cost of materials,labours,etc., complete complying with standard specification and as directed by the departmental officers

Plain Cement Concrete 1:4:8 (One part of Cement, Four part of Crushed stone sand (M - sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and erecting centering for sides and soffits including supports and shuttering upto 3m high for plane surface such as side slabs of RCC boxing and similar vertical RCC slab etc., withall cross bracings using mild steel sheets of size 90 x 60cm and 10 gauge stiffened with welded mild steel angles of size 25 x 25 x 3mm for boarding laid over Oak (country wood) joists of size 10 x 6.5 cm spaced at about 90 cm centre to centre and supported by casuarina props of 10 to 13 cm dia spaced at 75 cm centre etc., complete (Drain works)

Column

Circular Column

Grade Beam

Beams and slabs

Suppling and fabricating and placing in position MS (or) R.T.S. bar for Reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 50 mm thick in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

Reinforced Cement Concrete 1:1.5:3 (One Cement, One and half sand & Three coarse aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Upto Basement

Ground Floor

Brick work using Country Bricks of size 8-3/4" x 4-1/4" X2-3/4"" in Cement Mortar 1:5 (One cement and five crushed stone sand) including curing neat finishing, etc., complete complying with standard specifiction.

Upto Basement

Ground floor

Plastering with cement mortar 1:3, 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar 1:5 mix, 12mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Supplying and laying in flooring with fully polished Synthetic Grey colour Granite stone of 20mm thick (average) of 8' X 4' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Paving the floor with Kotta stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the floor with Pre-Polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.

Finishing the top of Sloped Roof, Sunshade with Decorative Pressed Tiles of approved Quality laid in Cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick mixed with WPC at 2% by weight of Cement used and top pointed with same red oxide mixed mortar etc., complete complying with standard specification

Sthapathy work for Circular Column including all labour and material charges etc., complete as per standard specification (L.R)

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting with Enamel Paint over the New Iron works of approved quality and colour without priming coat including cost of all materials and labour charges etc.,complete as per standard specifications.

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains SD 65

Supply,Delivery and fixing of 20mm dia GI Service pipe including cost of all material charges and labour charges etc., complete as per Specifications

Wiring with 2x1.5sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) SD 18 - PWD Elec.Data 24-25

Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mmx100mmx113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3pin non interlocking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point SD 37 PWD Elec.Data 24-25

Supply and fixing of 1200 mm (48") AC Ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp. SD 106 PWD Elec.Data 24-25

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting - SD 88 PWD Elec.Data 24-25