Civil and allied work for foundation of proposed storage racks at ARAI- Kothrud, Pune

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees of growth up to 1.0M either manually or by mechanical means and disposal of rubbish material outside of the ARAI premises on contractor's risk and cost with all legal compliances at any distance by loading, unloading and transporting to an authorised location/place approvable to the local municipal or competitive authority. (This job includes levelling, excavation for uprooting from root level and backfilling, ramming the filed up trenches and general cleaning of entire plot) (Complete plot area to be measured).

Labour charges for removing existing paving block from the area and re-fixing paving block in good condition (over concrete surface) in given design, pattern including procurement & laying grit, dust crushed sand as bed beneath paving block (of thickness 50mm) scope also includs compaction, filling the joints with grit etc complete. shifting of servicable & unservicable blocks within Premises up to lead 100 metrs.

Demolition of Existing Concrete:- by Manual/Mechanical means including tools, tackles, machineries, cutting devices, mechanical excavators, dumpers, loaders, etc. for Demolition of any existing Structures upto required levels and as directed in all respects including disposal of unserviceable material inside the ARAI premises on contractors responsibility, any lead and any lift as per direction of Engineer - in- charge cleaning the site in all respect.

UCR: Random rubble masonry with hard stone in sub structure (Below ground level) & superstructure including leveling up with cement concrete 1:4:8 (1 cement: 4coarse sand : 8 graded stone aggregate 20 mm nominal size) for low height compound wall. Rate includes necessary tools & tackles, scaffolding, loading- unloading & shifting of material. The masonry shall be carried out in regular courses of height not exceeding 50 cm. Scope also includes curing, filling of joints and not includes flush pointing. width of UCR up to 600 mm & height up wall up to 1.5 meter.

Backfilling with avaiable material: Excavation, shifting of murum from other location within ARAI premises with the help of mechanical means and shifting the excavated material for backfilling by dumper/ tractor or suitable means with lead up to 300 meter. Backfilling to be carried out in layers not more than 300 mm with compaction with vibro roller of suitable capacity, watering rammimg etc complete.

PCC 1:3:86 (M10 Grade) - Providing and laying in position cement concrete of specified grade with RMC or site mix including the cost of centring and shuttering, placing including consolidation, watering, curing etc. complete. All work upto plinth level for PCC 1:3:6 (1 Cement : 3 fine sand : 6 graded stone aggregate 20 mm nominal size).

Providing and laying of Trimix Concrete flooring of 150mm thick by RMC M20 grade approved design mix as per consultant/EIC. Providing side shuttering with M S Channels, supporting bars & concrete required for fixing M S Channel, Transferring of Bench mark, marking the req. RL bysuitable means, required for checking the M S Channel level, Vibrating concrete with surface vibrator / screed vibrator and Vacuumed dewatering (Approx. of about 9000 kp/m2 or as directed by EIC) using approved make equipment and finishing the top surface to required level and slope using Floater of standard make. rate includes of providing and laying of 60 micron thick HDPE Sheet with over lap of min. 100mm before laying concrete with required size. Curing, Ponding, covering with Hasson cloth, concrete pouring by RMC, labour, Manual Pouring & shifting at confined area, Cleaning, Shifting, dismantling temp. arrangements, Repairing of damaged part of trimix with help of micro concrete, Max. allowable tolerance for trimix top +5mm or -5mm, Protection of existing column/ any structure against cement slurry.etc. all complete (Mode of Measurement : Treated Actual Area

Reinforcement - HYSD- TMT FE 500 - bar Reinforcement Steel - Providing, laying, fixing of Reinforcement Steel of required grade and sizes for R.C.C. work including straightening, cutting, bending, hoisting at all levels, with all lead & lift, placing in position including preparing and submitting bar bending shop diagrams before placing, galvanised ms binding wire as approved etc. complete as per drawings details & written instructions.- Fe-500

Structural steel F/E- Structural steel work with available material- Labour charges for structural steel work : Fabricate, erect, paint structural steel for frames at designated heights shown in the drawings including cutting, bending, drilling, fasting to corner block wall or concreted members using suitable anchor fasteners etc. complete. The general sections of the frame will be rolled steel channel or angle sections as per the design and GA drawing given by ARAI, any shop drawing required is to be given under this item , including hoisting, fixing in position and applying a priming coat of approved steel primer, and two coats of approved shade of synthetic enamel paint

BBM: Fly Ash Brick Masonry Work - at all heights, with Non modular sized, Machine made Fly ash Lime Bricks , confirming to I.S. 12894-2002 , of class designation 7.5, ( 75 kgf/sq. cm ), Any size with fly ash confirming to I.S.3812-1981, : a) Cement mortar 1: 6 (1 cement : 6 coarse sand) in super structure as per CPWD Specification, including scaffolding at all levels, with all lead lift and curing etc. complete for all widths masonry. Masonary should be in line , level, plumb with joints raked as per standard

External Plaster: Providing & applying, in single coat Sand Faced / cement plaster 15 mm thick on internal / external walls, in cement mortar 1:4, ( 1 Cement : 4 fine sand) to concrete, fly ash Block / brick surface, on walls in all levels and at all positions, on joints, and corners rounded off, including scaffolding & curing etc. complete.

JCB Hiring : Sevice charges for JCB on hourly basis for civil -various earth work. Scope includes consumable such as diesel, oil and driver charges. JCB must be certified as Good for Use & must have PUC & fitness certificate

Kerb stone : Providing & fixing concrete kerb stone of size 600 (L)x 125(B) x 450 (H) in line, level , plumb over PCC surface, including raking of joints & filling with rich cement mortar.

Supply of Skilled Labour with required working tools on man-days basis with supervisor of contractor's representative

Supply of Unskilled Labour with required working tools on man-days basis with supervision of contractor's representative