Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹25.5 L+₹4.5 L (21.4%)Admitted-Finance | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SYEED NOORULLAH RAZVI L2 | M/s. J.K. WATER MISSION L1 |
|---|---|---|---|---|---|
| 1.10 | Construction of Bore well by way of Boring/drilling of bore well of 200 mm dia. and simultaneous lowering of casing/ strainer pipe, by DTH/ODEX method prescribed in SI: 2800 (part 1), by fixing case drive shoe including observing of samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 m depth below ground level | 90 | Mtr | 10,500 ₹9,45,000 | 10,000 ₹9,00,000 Lowest |
| 1.20 | Construction of Bore well by way of Boring/drilling of bore well of 200 mm dia. and simultaneous lowering of casing/ strainer pipe, by DTH/ODEX method prescribed in SI: 2800 (part 1), by fixing case drive shoe including observing of samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. beyond 90 m and upto 160 m depth below ground level. | 70 | Mtr | 10,500 ₹7,35,000 | 5,000 ₹3,50,000 Lowest |
| 1.30 | Supplying, assembling, subsequent lowering and fixing in vertical position in above bore by ODEX method by double layer welding, ERW FE 410 M.S plain ended casing pipe of 200 mm dia. confirming IS:4270 of reputed and approved Make including Manufacturers latest test certificates, painting of outside surface with two coats of anticorrosive paint including required hire & labour charges, fitting and accessories, all complete for all depths, having 200 mm nominal dia. and minimum wall thickness not less then 6.50 mm. The job includes Fabrication, flushing of holes in the pipes as per strata of the bore. | 160 | Mtr | 4,500 ₹7,20,000 | 4,375 ₹7,00,000 Lowest |
| 1.40 | Development of the tube well in accordance with IS:2800 (Part-I) and IS: 11189 to establish maximum rate of usable water yield without sand contents with required capacity of air compressor run for required time till well shall be fully developed. The job includes measuring yield not less then 4000 GPH, static water level and draw down etc. by step draw down method by lowering of suitable capacity submersible pumping unit along with DG set at site till the turbidity level comes below 5 NTU and safe yield shall be achieved and collecting the water sample and shall be tested in central laboratory, disinfection of the tube well all complete included required hire and labour charges of air compressor, pumping unit along with column pipes, starter, cable, tools and accessories etc required at site for harnessing. | 1 | Job | 1,50,000 ₹1,50,000 Lowest | 1,50,000 ₹1,50,000 Lowest |
Tender Value
₹21.4 L
EMD Value
₹65,000
Closing Date
22 Dec 2025, 3:00 pmClosed
Ex. Engineer JS PHE Ground Water Division Srinagar
Ex. Engineer JS PHE Ground Water Division Srinagar, Bagli Ali Mardan Nowshera Srinagar
Construction of 02 No. Service Reservoirs in rural village Ajas including up-gradation of distribution system in left out and outgrowth households of Village Ajas (Production Well).
2025_PHE_297345_2
Fresh e-NIT No. 66 of 2025-26
Open Tender
Drilling Works
Item Rate
45 days
Bandipoara
Please refer Tender documents.
2 documents required · 2 mandatory
₹2,000
Yes
Ex. Engineer JS PHE Ground Water Division Srinagar
₹65,000
Yes
13 Jan 2026
16 Dec 2025
23 Dec 2025
16 Dec 2025
22 Dec 2025
16 Dec 2025
Construction of Bore well by way of Boring/drilling of bore well of 200 mm dia. and simultaneous lowering of casing/ strainer pipe, by DTH/ODEX method prescribed in SI: 2800 (part 1), by fixing case drive shoe including observing of samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 m depth below ground level
Construction of Bore well by way of Boring/drilling of bore well of 200 mm dia. and simultaneous lowering of casing/ strainer pipe, by DTH/ODEX method prescribed in SI: 2800 (part 1), by fixing case drive shoe including observing of samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. beyond 90 m and upto 160 m depth below ground level.
Supplying, assembling, subsequent lowering and fixing in vertical position in above bore by ODEX method by double layer welding, ERW FE 410 M.S plain ended casing pipe of 200 mm dia. confirming IS:4270 of reputed and approved Make including Manufacturers latest test certificates, painting of outside surface with two coats of anticorrosive paint including required hire & labour charges, fitting and accessories, all complete for all depths, having 200 mm nominal dia. and minimum wall thickness not less then 6.50 mm. The job includes Fabrication, flushing of holes in the pipes as per strata of the bore.
Development of the tube well in accordance with IS:2800 (Part-I) and IS: 11189 to establish maximum rate of usable water yield without sand contents with required capacity of air compressor run for required time till well shall be fully developed. The job includes measuring yield not less then 4000 GPH, static water level and draw down etc. by step draw down method by lowering of suitable capacity submersible pumping unit along with DG set at site till the turbidity level comes below 5 NTU and safe yield shall be achieved and collecting the water sample and shall be tested in central laboratory, disinfection of the tube well all complete included required hire and labour charges of air compressor, pumping unit along with column pipes, starter, cable, tools and accessories etc required at site for harnessing.
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.35 MB
BOQ_966970.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .