CONSTRUCTION OF LABS UNDER PM SHRI KENDRIYA VIDHYALAYA NO. 1 JALANDHAR AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Surface dressing n.exc 15cm deep in any type of soil complete all as specified and as directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified.

Excavating in trenches, not exc 1.5m wide and exc 1.5m in but not exc 3.0m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified.

Returning, filling in floor, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil, complete all as specified

Spreading levelling in layers not exc 25cm thick in floor including well ramming and watering complete all as specified and directed.

M&L for removing excavated soils n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

M&L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge.

M&L for mild steel TMT bars of 6mm to 8mm dia and over for stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge.

M&L for RCC Design Mix, M-25 (using 20mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and as directed .

M&L for RCC Design Mix, M-25 (using 20mm graded aggregate) as in slab supported on walls, beam and column in floors, roof, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

M&L for RCC Design Mix, M-25 (using 20mm graded aggregate) as in beams, lintels over 1.5 m span and the like complete all as specified and as directed.

M&L for RCC Design Mix, M-25 (using 20mm graded aggregate) as in columns, pillars, piers, posts and strut like complete all as specified and as directed.

M&L for RCC Design Mix, M-25 (using 20mm graded aggregate) as in chajja supported on walls, complete all as specified and as directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, flat surfaces of concrete, surface is required to be fair finished complete all as specified and as directed by the Engineer-in-Charge.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rectangular or polygonal surfaces of concrete, surface is required to be fair finished complete all as specified and as directed by the Engineer-in-Charge

M&L for formwork to sides and soffits of lintel beams/ bands, chajjas, lintels, cantilevers, shelves including supports overhangs etc., flat surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge.

M&L for formwork to chullah hoods, cha jjas, troughs and similar items including edges, complete all as specified and directed

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat surfaces of concrete , surface is required to be fair finished. complete all as specified and as directed by the Engineer-in-Charge.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide, as roughed finished surface of concrete complete all as specified and as directed by the Engineer-in-Charge

M&L for broken stone or boulders hardcore of gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 100mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate, as in sub base complete all as specified and as directed by the Engineer-in-Charge

M&L for 100mm thick cement concrete type C-2 1:3:6 using 40mm graded aggregate, as in sub base complete all as specified and as directed by the Engineer-in-Charge

M&L for brickwork with fly ash bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge.

M&L for 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc all as specified and directed by Engr-in-Charge with WPC

Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin; harder) application with 100% water dilution and Pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprayer by a company authorised applicator” complete all as specified and directed

M&L for rendering 15 mm thick in Cement Mortar 1:6 on fair faces of Brick Walls or on Concrete Surfaces, finished Even& Smooth complete all as specified and as directed.

M&L for plastering in CM 1:4 , 15mm thick on fair faces of brick/concrete wall surfaces complete all as specified and as directed.

M&L for 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even& Smooth complete all as specified and as directed.

Supply only Integral waterproofing compound (ISI marked) complete all as specified and directed.

M&L for preparation of new plaster surfaces of walls and applying two coats of oil bound distemper including a coat of primer on plastered surfaces over a coat of 1mm thick wall putty complete all as specified

M&L for preparation of new surfaces of wall including cornices, plasters etc (Plastered or unplastered surfaces) and applying two coats of exterior emulsion paint over a coat of alkali resistant primer complete all as specified

M&L for preparation of new plastered surface of ceiling including cornices pilasters etc. and applying two coat of oil bound distemper including a coat of primer on plastered surfaces, complete all as specified and as directed

M&L for 75 mm thick cement concrete 1:3:6 type C-1, (using 20 mm graded stone aggregate) as in plinth protection and making joints and filling with bitumen sand mastic including necessary form work complete all as specified and directed.

M&L for PCC (1:2:4) 25mm thick type B-0 using aggregate 12.5mm graded as in sub base, complete all as specified and as directed

S&F Vitrified coloured 8 to 10 mm thick tile (Premium quality) light shade area of each tile not exc 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed 1:6 cm complete all as specified and as directed. Make:- Kajaria/Somany/Johnson

All as per Srl item No 36.00 here-in-before but skirting on wall in CM 10mm thick 1:4, complete all as specified.

M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 15mm thick screed bed to floor finishes in CM 1:4 complete all as specified and directed.

S&F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed or Skelton shutter factory made open rebated prepared to receive glass, gauge etc without sash bars edges of framing plain fitted with cut and mitered beads for securing glass etc size of member all as per clause 8.24 (a) of SSR Part-I ,complete all as specified and as directed.

S&F Steel window (combination) with glazed shutter as well as gauged shutter with side hung/ top hung shutters incl box type hinges, steel peg stay, handle & locking arrangement and frame made out of 1.25mm thick pressed steel frame including Guard bars, hold fast, tower bolt and handles & flat iron etc and necessary cooler arrangement in window and fixed with PCC (1:2:4), complete as per Drg No CEJZ/WD-1655/22 and CEJZ/TD-1019/08 Sheet No. 1/3 to 3/3. complete all as specified and directed. Note:-The above rate for glazed and gauged shutter window and measured one time clear opening for payment of window.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 100mm size MS butt hinges medium weight cold rolled (zinc chromate)., complete all as specified and directed

S&F aluminium anodised handles 125mm long, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long, complete all as specified and directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm in size, complete all as specified and directed

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed 300mm long, complete all as specified and directed.

S&F floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 140mm complete all as specified.

S&F sheet glass ordinary quality 3.0 mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frame and wooden beading in wooden frame complete all as specified.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

M&L for 25 mm dia mild steel pipe curtain rod , powder coated fixed with & including MS powder coated hooks/brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall complete all as specified

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) (Column ) completed all as specified.

Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area ( Masonry Foundation ) complete all as specified and directed.

Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface ( Floor ) complete all as specified and directed

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) (Along Perimeter of Floor) complete all as specified and directed.

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

M&L 19mm Thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both face, commercial type, fixed with screws to timber frame-work complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised., width of flaps when open in 30mm complete all as specified and as directed

M&L for 6mm thick and 18/19mm width teak wood lipping complete all as specified and directed

S&F 100mm Long Aluminium Handle fabricated type complete all as specified.

S&F 100mm Hasp and staple, safety type, brass with aluminium anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F Green Board (8'x4') (4x4 Green chalk board and 4x4 White marker board complete all as specified and directed

S&F sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed. Make:- Nirali/Jaguar/Blue Star

S&F 1000 ltr Rotational moulded polyethylene water storage tanks UV protected antimicrobil triple layer (white) (cylindrical vertical with closed top) hoisted and fixed in position all as specified. Make:- Sintex (Pure)/Sheetal/Rotex

S&F 25mmPTMT Ball valves with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified.

S&F 75 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 75 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Cutting chases, pinning in brick wall/slab etc and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

S&F in 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule including taking down the existing fitting.

S&F 15mm bore galvanized iron tube s medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified

All as per srl item No 76.00 here-in-before but for 20mm bore tube complete all as specified and directed

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

M&L for Granite work 18 -20mm thick ( table rubbed and polished) in steps , jambs ,cills, platform and similar work like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture match with shade of granite and including screed bed 15mm thick in CM (1:6) complete all as specified and directed.

M&L for concrete bed to drain pipes including packing under and haunching against the sides of pipes after the air laid and tested in Cement Concrete 1:3:6 type C2 for bore of pipes 150mm dia complete all as specified and directed

M&L for Reinforced concrete pipes 150 mm bore of pipe, class NP3, laid, jointed and tested with collars complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregates as in benching/haunching for manholes, bands, coping, bed plate and for embedding rungs etc. with slightly chamfered or rounded angles including necessary form work, if any and finishing exposed surface even and smooth without using extra cement complete all as specified

M&L for brick work with sub class ‘B’ bricks, old size straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6) including corbelling and arches complete all as specified.

M&L for rendering 15mm thick in CM 1:3 on internal concrete wall surfaces finished even and smooth without using extra cement with WPC, complete all as specified and directed

M&L for pre cast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab set in CM 1:4. complete all as specified and directed.

M&L for Cutting into existing manhole for connecting new drains and making good for 150 mm bore pipe and rendering, cutting out existing benching and forming branch (1/2 or 3/4 section) channel in plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregates, surface finished even and smooth and reforming benching as reqd. complete all as specified and directed

M&L for PCC 1:4:8 type D-2, 75mm thick using 40mm graded aggregate as in sub base to floors complete all as specified and directed.

M&L for Cement concrete coloured tiles 25cm x 25cm x 20 to 22mm thick, machine pressed with grey cement and pigment; set jointed and pointed in neat cement slurry in floors, and cut and polished over 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 60mm thick machine pressed precast interlocking paver block coloured any shape and size confirming to IS15658-2006of M35 Grade with grey cement and pigment complete all as specified and directed. Note : The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping, bed blocks and edges of tile etc complete all as specified and directed .

Supply, laying, jointing and testing 40mm dia bore steel water tubing galvanized, medium grade, ISI marked with necessary fittings such as tees, elbows, bends, reducers, unions etc. laid in trenches, under roads, along wall etc. complete all as specified.

All as per srl item No. 91.00 here-in-before but 25mm dia bore.

M&L for gun metal gate/ globe valve 25 mm dia (ISI marked) with iron wheel head screwed both ends for pipes or for unions for steel tubing complete all as specified and directed.

Valve pit of size 900x900x900mm(internal dimensions) ,stone/ brick construction, including all necessary excavation and earth work in any type of soil, returning, filling in disposal of surplus spoil to distance not exceeding 50 m and depositing where directed, PCC in foundation of the mix (1:2:4) type D-2, stone masonry in cement mortar (1:4) rendering 12 mm thick cement mortar (1:4) internally, finished even and fair and pointing flush externally as the work proceeds in the same mortar. Mild steel angle iron 40 x 40 x 6mm frame MS sheet cover 3.15 mm thick with handle and locking arrangement, painting all the exposed MS work with two coats of synthetic enamel paint of the that as approved by the GE over a coat of red oxide primer and painting all the MS work embedded in PCC with two coats of black bituminous paint complete all as specified.

M&L for Cutting old cast iron/MS/DI/GI pipes and reducing to required length, in position, for insertion of new tees, reducer, branches, etc for repair works, suitable for the 40/50 mm bore of pipes all as specified and directed

M&L for Rolling and consolidating formation surfaces in cutting by hand roller 0.2 to 0.50 tonne complete all as specified and directed.

M&L for 25mm sand cushion, filling under floors or in foundations including watering and consolidation all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

Excavation in post holes (or similar holes) in soft/loose soil, each not exceeding 0.50 cum and getting out, returning, filling in and well ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, including watering and removing surplus soil to a distance not exceeding 50m away from the starting point and making good surfaces complete all as directed.

M&L for PCC (1:3:6) type C-2, (using 40mm graded stone aggregate) as in foundation, mass fillings for posts/struts etc. complete all as directed.

M&L for Rolled sections as in vertical member, rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W(GdeE-250) quality A, complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI bared corrugated steel roof sheet 0.50 mm thick of an column having tensile strength of 550mpa fixed with self drilling screws complete all as specified. Make:- Tata Blue Scope/JSW

Surface excavation n.exc 30cm deep and averaging 15cm deep in soft/loose soil all as specified and directed

M&L for point wiring for light point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel boxes duly painted with anti corrosive paint over a coat of red oxide primer with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with cup washers etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No. 104.00 here-in-before but for one fan point controlled by one switch complete all as specified.

All as per Srl item No. 104.00 here-in-before but for one socket outlet 5 Amps on the same board controlled complete all as specified.

All as per Srl item No. 104.00 here-in-before but with 2.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multistranded copper conductor cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.

S&F switch piano flush type, 6 Amps single pole, one way complete all as specified.

S&F switch piano flush type 16 Amps single pole, one way complete all as specified.

S&F socket out let 6 Amp, 5 pin, 2-in-1 flush type complete all as specified.

S&F Socket outlet multi purpose 2 in 1, 5/6 pin, 5 & 16 Amps, flush type complete all as specified.

S&F five step fan regulator, electronic type, single phase, including connection complete all as specified.

S&F ceiling rose surface type PVC/ polycarbonate 65mm x 50mm three terminal complete all as specified.

S&F LED lights fitting 1x 20 Watt, 220V AC decorative box type frame with holder including LED tube rod 20 watt connecting up single/ double connections with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

S&F ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, 5 star, BLDC type complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 380mm sweep with blades, frame and louvers (superior quality) complete all as specified and directed.

Cutting holes for exhaust fan of size 380mm dia sweep in brick walls built in cement mortar or cement lime mortar and stone walls built inline mortar for inserting holdfasts and making good dismantled portion in cement mortar 1.3 or cement concrete 1:2:4 Type B-1 as required. complete all as specified and directed.

S&F MCB SP 6 to 32 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Legrend/ ABB/ Siemens/ Hager. complete all as specified and directed by Engr-in-charge. Note:- Make of Sr item No. 118 to 120 is ABB/Schneider/Legrand

S&F MCB SPN 40 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Legrend/ ABB/ Siemens/ Hager. complete all as specified and directed by Engr-in-charge.

M&L in replacement for sheet metal DB for MCBs, SPN, 8 ways 240 v, double door, single phase, with copper bus bar, neutral bar/ connectors/ earth link suitable copper thimbles, lugs etc complete all as specified. Make: EKINOX3 series of Legrand/Acti 9 metalic series of Schneider/Optipro of Indoasian/Osafe of HPL/Metallica of Havells or equivalent in ABB/ Siemens/ Hager.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level with the top edge of electrode not less than 1.5 meters below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved all as specified and directed and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.complete all as specified and directed.

Supply, laying, jointing and testing XLPE insulated , PVC sheathed, GI strip or wire armoured ,heavy duty electric cable with stranded aluminium conductor 1100 Volts grade of cross sectional area 16 sqmm 2 core laid in trenches/ducts/through pipes /in floor road/along the pole etc complete all as specified and directed by Engineer-in-Charge

M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified.(Note : Punned thickness of 18 cm should be considered for payment)

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge.

S&F galvanised pipe light grade of IS marked 40 mm bore for passing of cable fixed to poles/walls/laid under floor complete with and including fittings as required compete all as specified and directed by Engr-in-charge.

M/S Vinod Kumar (BID ID -3286360)

ASHOK KUMAR MAHAJAN (BID ID -3291227)