Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.6 LAccepted-AOC P 45 JOGENDRA GARDEN KOLKATA 700078 | KOLKATA | WEST BENGAL | 700078 | L1 | Accepted-AOC Being a lowest bidder and reasonable | |
| 2 | L2₹48.0 L+₹1.8 L (3.95%)Rejected-Finance ROOM NO B 111 PART III GANESH MURTINAGAR CAPT PRAKASH PETHE MARG CUFFEPRADE CALABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹48.1 L+₹2.0 L (4.24%)Rejected-Finance 2 BAISHNAB SETH 1ST LANE KOLKATA 700006 | KOLKATA | WEST BENGAL | 700006 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹48.2 L+₹2.0 L (4.42%)Rejected-Finance SHIVSHAI PUNARVASAN PRAKALP BLDG NO 10 ROOM NO 115 MAHARASHTRA NAGAR MANKHURD E MUMBAI 400088 | MUMBAI SUBURBAN | MAHARASHTRA | 400088 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹48.5 L+₹2.3 L (5.00%)Rejected-Finance 38 BAGUIATI ROAD KOLKATA 700059 | 24 PARAGANAS NORTH | WEST BENGAL | 700059 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
21 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
REPAIR MAINT OF B/R EXTERNAL SERVICES AT BLDG NO O-5 AND O-7 COMPLEX INSIDE FORT WILLIAM UNDER GE (FW) KOLKATA
2023_MES_607269_1
8155/E8
Open Tender
Civil Works
Item Rate
270 days
GE(FW) Kolkata
Ref tender documents
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹88,000
6 Oct 2023
30 Jun 2023
22 Jul 2023
30 Jun 2023
21 Jul 2023
14 Jul 2023
Amount
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for and removal of debris outside MOD land and disposed off complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.
Dismantling cast iron work of any description complete all as specified and as directed.
Removing debries, rubbish and the like incl spoils, bushes of any kind of to out of MD land as instruction issued by KMC, Kolkata, all as directed by Engineer-in-Charge.
Grubbing up tree trunk exc 100 cm and n. exc 150 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and as directed.
Excavation in trenches n exc 1.50 m wide and n exc 1.50m depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exc 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in soft/loose Soil, complete all as Specified and as directed.
Returning filling in incl spreading , levelling , watering and well ramming in layers not exc 25 cm as in soft/ loose Soil, complete all as Specified and as directed.
Removing excavated materials exc 250m but not exc 500 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.
M&L for providing Plain Cement Concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete completed all as specified and directed.
M&L for providing Cement concrete 1:2:4 type B1 using 20mm graded Aggregate in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.
M&L brick work with Fly ash bricks old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L brick work with Fly ash bricks' old size brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed.
M&L for brick work with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 for walls built in cement mortar incl all quoins arches pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and as directed by Engr-in-charge.
M&L for 15 mm thick rendering in cement mortar (1:4), in two layers, (10mm+5mm thick), to fair faces of brick or concrete wall surfaces, top layer mixed with water proofing compound (@ 3 % by weight of cement or as per manufacture's instructions), finished rendering surface even and smooth(without using extra cement). (Note: Water proofing compound to be measured and paid separately as "Supply only")
Supply only liquid water proofing compound all as specified and as directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished rendering surfaces even and smooth (without using extra cement) complete as specified and directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished rendering surfaces even and smooth (without using extra cement) complete as specified and directed.
M&L rendering 5mm thick on fair faces of concrete surfaces in cement mortar (1:3), finished even and smooth without using extra cement complete all as a specified and as directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- treed / stopped ends etc., completed all as specified and directed.
M&L for extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- treed / stopped ends etc., completed all as specified and directed.
S & F as in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 1200mmX450mmX75mm thick of capacity 5 MT, fixed in proper position complete all as directed by Engr in Charge
S & F as in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 900mmX450mmX75mm thick of capacity 5 MT, fixed in proper position complete all as directed by Engr in Charge
S & F as in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 600mmX450mmX75mm thick of capacity 5 MT, fixed in proper position complete all as directed by Engr in Charge
S & F as in repair RCPC (Reinforced Cement Polymer Concrete) grating slab on size 600mmX450mmX50mm thick of capacity 3 MT, fixed in proper position complete all as directed by Engr in Charge
Supply and laying in position 600mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars as specified and directed by Engr -in-Charge.
M&L Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and as directed.
M&L for granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making moulds on edges laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for 300mmX300mmX10mm thick high traffic paver tiles (coloured) joint free as in floor of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 20mm thick screed bed in CM(1:6) complete all as specified and as directed by the Engr-in-Charge. Make : 'ENDURA' by Johnson or equivalent in SOMANY/ORIENT (IS-4457:2007)
M&L for pre polished coloured chequered cement concrete tiles 30cmx30cmx 20mm thick made with electro vibro technology with rubber/ PVC moulded set, jointed and pointed in neat cement slurry in floors with white cement & pigment over laid screed bed or bedding layer of mortar 15mm thick(1:4) for laying floor finishes and including with dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed by Engineer in charge.
Supply and laying 60mm thick factory made chamfered edge precast glazed cement concrete paver block of M-50 grade confirming to IS 15658-2006 with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. (NOTE: Cost of sand cushioning is deemed to be included in the quoted rates)
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays, surface finished even and fair without using extra cement complete all as specified and directed.
M&L for mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 all as specified and directed by Engineer-in-Charge.
S&F 1.60 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as directed by Engineer in charge.
Supply and fixing for structural steel work Fe 410-W (Gde-E-250) rolled mild steel in joist, channel, angle or Tee section fixed independently etc up to height 4 to 6 mtr from each floor level (cut to ordinary length ie. Within 20mm of the length indicate) Gde Fe-410-W-(Gde-E-250) Quality-B including using former iron props and steel plates to existing RCC over head members like beams, slabs etc so as to ensure safety of existing structure and floor during repairing works complete all as directed by Engr-in-Charge. Note: The section to be provided under this item will be used as beam to support floor/roof.( Note : the item execute
M&L in repair Expanded metal cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia weight n exc 4 Kg/Sqm or fixing with galvanised steel staples fixed to wooden of steel frame including rebating etc complete all as specified and directed.
Cleaning of existing covered / uncovered (partly / semi or fully filled up) drain, of any opening width and depth by removing and re-fixing of cover-slab (wherever applicable) taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain, washing of the drain with water and removing the same at any distance where directed as directed by KMC, complete all as directed by the Engineer-in-Charge.
M & L Preparation of New surface of walls and soffits of Chajjas, roof slab etc, by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blade/ scraper as applicable to make the surface free from loose paint, algae formation dust etc including necessary safety & protective measures such as safety belt, headgear etc., for smooth finish and finishing with two coat of weather proof exterior emulsion paint over a coat of suitable exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building hight complete all as specified and directed.
Excavation in trenches n exc 1.50 m wide and n exc 1.50m depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exc 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in soft/loose Soil, complete all as Specified and as directed.
Returning filling in incl spreading , levelling , watering and well ramming in layers not exc 25 cm as in soft/ loose Soil, complete all as Specified and as directed.
Removing excavated materials not exc 50 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 200 mm set in cement mortar complete all as specified and as directed.
All as per Item No 45.00 above, but for demolition and breaking up drain pipes 150 mm bore drain pipes
M&L for salt glazed stoneware (SGSW) grade 'A' drain pipes 200mm bore laid in trenches and jointed and set in cement mortar 1:1, complete all as specified and directed by Engr-in-Charge.
M&L for salt glazed stoneware (SGSW) grade 'A' drain pipes 200mm bore laid in trenches and jointed and set in cement mortar 1:1, complete all as specified and directed by Engr-in-Charge.
M&L concrete bed to drain pipe including packing under and haunching against the side of drain pipe after laid and tested in PCC 1:3:6 type C-2 for 200 mm bore pipes complete all as specified and directed.
All as per Item No. 49.00 above, but PCC bed for 150 mm bore RCC pipe
Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), finished smooth and reforming benching for 200 mm bore pipe as required and as directed by the Engineer-in-Charge.
All as per Item No. 51.00 above, but for 150 mm bore pipe
M & L providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in landing, cover slab for manholes etc, chullah, hoods, chajjas, water trough, mangers, shelves and similar articles with plan face including chamfered weathering, throating etc including necessary use and waste of form work complete all as specified and as directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes complete all as specified and directed by Engr-in-Charge.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes complete all as specified and directed by Engr-in-Charge.
S&F 110 mm PVC (SWR) access door bends any radius including taking down old complete all as specified and directed by Engr-in-Charge.
S&F 75 mm PVC (SWR) access door bends any radius including taking down old complete all as specified and directed by Engr-in-Charge.
S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge.
S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge.
S&F in repair cast iron spun pipe 75mm bore fixed with walls complete all as specified and directed by Engr-in-Charge.
S&F in repair cast iron spun pipe 100mm bore fixed with walls complete all as specified and directed by Engr-in-Charge.
S&F in repair cast iron spun pipe 150mm bore fixed with walls complete all as specified and directed by Engr-in-Charge.
S&F 75 mm cast iron pipe Bends (any radius), diminishing pieces or tapers (larger bore measured
S&F 100 mm cast iron pipe Bends (any radius), diminishing pieces or tapers (larger bore measured
S&F 75 mm cast iron pipe Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete
S&F 100 mm cast iron pipe Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete
M&L for Cast iron work articles n. exc 5 kg grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters, spiral staircases and similar articles complete all as specified and directed
M&L for complete removal of existing treatment, washing, rubbing down and stopping of painted/treated surfaces/new surfaces and applying two coat of cement base paint over a coat of alkali resistant primer on old wall surfaces by brush and finish with roller complete all as directed by Engr-in-charge.
M&L for applying two coat of oil bound distemper with roller on newly plastered surface on newly wall plastered surface of wall including over of one coat white chalk on wall by brush and finish with roller complete all as directed by Engr-in-charge.
M&L for applying two coat of oil bound distemper with roller on newly plastered surface of ceiling including preparation one coat of chalk white of surfaces complete all as specified and directed.
Material & labour for preparing newly plastered surfaces of walls and applying two coat of cement based paint over cement wash with Portland cement slurry (white cement) for smooth wall finish complete all as specified and directed
M&L for applying two coat of cement base paint to old decorated (cement base painted) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.
M&L for applying one coat of cement base paint to old decorated (cement base painted) surfaces of wall including preparation of surface (by Washing, rubbing down, brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge.
M&L for complete removal of existing treatment, washing, rubbing down and stopping of painted/treated surfaces/new surfaces and applying two coat of cement base paint over a coat of alkali resistant primer on old wall surfaces by brush and finish with roller complete all as directed by Engr-in-charge.
M&L for cleaning old treated surface of wall, soffits of chajja, roof slab etc, with using high pressure jet washer including cleaning the surface by scarping as required using emery paper, putty blade/ scraper as applicable for removing loose paint, corrosion, algae formation etc complete with touch-up putty wherever required with applying two coats of weather proof emulsion paint by using airless spray technology capable of operating single spray gun with hose of adequate length over one coat of suitable exterior weather proof primer with Grago machine over 2 mm thick exterior wall care putty, including necessary scaffolding, safety and protective measures upto 4 story building height complete all as specified and directed.
M&L for cleaning old treated surface of wall, soffits of chajja, roof slab etc, with using high pressure jet washer including cleaning the surface by scarping as required using emery paper, putty blade/ scraper as applicable for removing loose paint, corrosion, algae formation etc complete with touch-up putty wherever required with applying one coats of weather proof emulsion paint by using airless spray technology capable of operating single spray gun with hose of adequate length over one coat of suitable exterior weather proof primer with Grago machine over 2 mm thick exterior wall care putty, including necessary scaffolding, safety and protective measures upto 4 story building height complete all as specified and directed.
Note for item No. 75 and 76. The all process of painting will be carried out of Manufacturer authorised representative only, Jet Water machine and Graco Spry painting Machine shall be borne by the contractor and also the contractor should provide adequate jet and Spray machines as per site requirement as directed by Eng-in-Charge.
M&L preparing old plastered surface of walls upto true finished surface as required to receive and applying one coat of exterior emulsion paint with roller complete all as specified and directed by Engr -in-Charge..
M&L preparing old plastered surface of walls upto true finished surface as required to receive and Appling two coats of exterior emulsion paint with roller complete all as specified and directed by Engr -in-Charge..
M & L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete.
M & L applying one coats of synthetic enamel paint on old steel surface of any description over 10 cm width or girth complete all as specified and directed.
M & L applying one coats of synthetic enamel paint on old painted surface wooden surfaces of any description over 10 cm width or girth complete all as specified and directed.
M&L For Up rooting of tree from walls of bldgs. up to extended root and spraying of acid of required quantity complete from any location of bldg., up to two storeys and above and making good disturbed surface with cement mortar (1:4) or cement concrete type C1 (1:3:6) using 20mm graded stone aggregate etc complete all as specified and directed.
Taking down eaves gutter and rain water pipe ( any size or pattern ) incl all fittings, heads, shoes, bends, swan neeks etc incl cleaning or removal to store(measured overall as fixed along the centre line over fitting and accessories).
S&F Cast Iron , rain water socket pipes 150mm bore (dia), Sand Cast, in any Length with Ears, with Cement Joints in Cement Mortar 1:1, fixed to Walls complete all as specified and as directed.
S&F 150mm dia CI bends or elbows, square or obtuse complete all as specified and as directed.
S&F 150mm dia CI double branch pipe( Tee Section) complete all as specified and as directed.
S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required and similar small articles conforming to Fe-290 Gde-E-165.
M/S SRINIVASA CONSTRUCTION
MARUTI ENTERPRISES
AZIM ENTERPRISES
MODERN AGENCY
DGR CONSTRUCTION
M/S SHRI P K ACHARJEE
SINHA ENTERPRISE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .