REPAIR/MAINT/UPGRADATION OF WATER SUPPLY INDOOR AND OUTDOOR INSTALLATIONS INCLUDING MAINTENANCE AND CLEANING OF SEWAGE DISPOSAL SYSTEM AT MIL STATION NAHAN UNDER GE CHANDIGARH

Amount

Demolition of cement conc in ground floors and pavings n.exc 15cms thickness (below or above GL).

Dismantling wrought iron or mild steel work of any description and in any position not otherwise provided for,complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering,complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises,complete all as specified and as directed.

Dismantling timber scantling in fillets ,rail,posts,rafter ,purlins,etc under 40Sq.cm in section,complete all as specified and as directed.

Demolition of cement conc(reinforced) in ground floors and pavings n.exc 15cms thickness (below or above GL).

Demolition of brickwork or stone/boulder masonary, built in lime mortar including quoins arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar complete all as specified and directed.

Taking down Chowkhats or frames without taking off shutters from the frame not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames without taking off shutters exc 1.50Sqm but nexc 4.00Sqm complete all as specified and directed.

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, solidly hearted built in retaining walls, abutment and sililar work complete all as specified and directed.

M&L stone walling built in CM 1:6 of random rubble uncoursed, well bonded, solidly hearted built in retaining walls, abutment and sililar work but except stone(old stone received) complete all as specified and directed.

Flush pointing to random rubble, uncoursed or brought up to coursed CM 1:4 complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate as in plinth protection, finishing the cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Forming contraction (dummy) joints 25 mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and as directed.

Sand filling under floors or in foundations including watering and consolidation,complete all as specified and as directed.

Material & labour for 80mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of not less than compresive strength 30 Kg/Cm and shape and size confirming to IS 15658-2006 of M-40 Grade with grey cement and pigment complete all as specified and directed by Engineer in Charge. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.

All as per srl item No 16 here-in-before but 60mm thickness of M-35 Grade

Material & labour for chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Material & labour for providing cement concrete Type B1 1:2:4 (20mm graded crushed stone aggregate) kerbs or mut stops, rounded or chamfered on edges etc complete including necessary form work complete all as specified and directed.

M&L Cement concrete in surface channels and drains in cement concrete 1:3:6 type C2 (40 mm graded stone aggregate) complete all as specified and directed.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

Supply only liquid water proofing compound.(Make- Bostik, Dr fixit, Fosroc, or Equivalent)

M&L for Hard core of gauge exc. 63mm but not exc 100mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed/rolled to a true surface complete all as specified.

M&L 75 mm thick Cement concrete type D2,1:4:8 (40mm graded stone aggregate) as in sub base,path,floor, hardstanding complete as as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots all as specified.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces , finished even and fair without using extra cement on walls in cement mortar1:4, (using WPC) complete all as specified and as directed.

M&L rendering 15 mm thick on brick work or concrete surfaces, finished even and smooth without using extra cement on walls in cement mortar 1:6, in patches complete all as specified and as directed by Engr-in-Charge

M&L rendering 10 mm thick cement plaster in CM (1:3) on ceiling surfaces finished and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L two coats of cement base paint on new wall surfaces including complete removal of existing treatment and all necessary preparation and wetting and curing, complete all as specified.

M&L two coats of acrylic distemper/ distemper oil emulsion (OBD) on new wall surfaces including complete removal of existing treatment over 2mm thick wall care putty, complete all as specified.

M&L for preparation and applying three coats of white wash on new surfaces of ceiling complete all as specified and as directed.

Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed.

M&L cement concrete 1:4:8 type D2 (40 mm graded crushed stone aggregate ) in foundation filling and mass concrete for retaining walls, posts etc. all as specified and as directed.

Dismantling existing water proofing treatment hessian cloth base, membrane or any type including removal of debris from the site and depositing where directed.

M&L for preparation and cleaning surfaces of cement concrete incl flashing and junction of parapets etc and applying APP based polymeric memberane min wt 3 Kg/Sqm and min 3 mm thick reinforced with non woven fabric with torch application over and including a coat of oil base bituminous primer and finally applying two coats of bitumenous aluminum paint @ 0.20 kg per sqm over APP membrane, complete all specified and directed.

Demolition of existing mud phuska , brick Koba water proofing treatment, bringing it down carefully, removal of debris from the site and depositing where directed at a distance exc 1.00 Km but n exc 2.00Km complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, not otherwise described two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and as directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed.

S&F mild steel ventilator with top hung or fixed half glass and half wire mesh portion and including if required projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded. Note for item No 38 to 40 :- Glass / wire gauge shall be measured and paid separately.

S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed stainless steel wire staples complete all as specified and directed.

S&F 4mm sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

M&L two coats of cement base paint on old wall surfaces including complete removal of existing treatment and all necessary preparation and wetting and curing, complete all as specified.

M&L two coats of acrylic distemper/ distemper oil emulsion (OBD) on old wall surfaces including complete removal of existing treatment and all necessary preparation with and incl priming plastered surface over 2mm thick wal care putty, complete all as specified.

M&L RCC M-25 Design mix, using 20mm graded trap stone aggregate for Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified.

M&L RCC M-25 Design mix, using 20mm graded trap stone aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) , complete all as specified.

Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified.

M&L TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

M&L TMT bars Ditto, 5mm dia and over upto in stirrups, spacers and binders mild steel wire(annealed) not less than 0.9mm dia or securing with clips, complete all as specified.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6,complete all as specified and as directed.

S&F Glazed ceramic Coloured tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering all in CM 1:4 as specified.

S&F Fe-410-W(Gde E-250)quality B rolled mild steel in roof trusses(Framed)trusses, purlin, crane gantries, rails anfd framing(beam, tee, angle, channel or flat section)including distance pieces , cleats etc., complete all as specified.

S&F 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275, complete all as specified.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275, complete all as specified.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 meter in depth for foundation, laying of cable, pole etc or for shafts, wells, cesspits, manholes pier holes etc not exc 10 sqm on plan and not exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested,poles, stays , struts have been errected and tested , all as specified.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

Demolition and breaking up salt glazed stone ware pipe 100mm dia set in cement mortar including PCC haunching etc, complete all as specified.

All as per Srl item No 59 above but 150mm dia pipe

M&L for 100mm dia salt glazed stone ware (grade ‘A’) pipe laid in trenches including jointing testing etc, complete all as specified.

All as per Srl item No 61 above but 150mm dia pipe, complete all as per specified and as directed

M&L for PCC 1:4:8 type D-2 (using 40mm graded aggregates) concrete bed to 100mm bore drain pipes including packing under & haunching against the sides of pipes etc complete all as specified.

All as per Srl item No 63 above but 150mm bore pipe, complete all as per specified and as directed

M & L for providing RCC 1:2:4 type B1 ( using 20 mm graded stone aggregate) as in manhole cover slabs etc set in CM 1:6 including necessary form work and handling and placing on manholes, complete all as specified. Note : The quoted rates shalll deemed to include for providing two handles of MS round bars 12 mm, make to shape and of length 65 cm long in each cover complete.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1 smooth finished for 100 mm internal dia of pipe, complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedastal pattern) white (inclusing fixing bolts, but excluding flushing cistern and flush pipes), complete all as specified and directed.

S&F in repair vitreous china floor mounted wash down one piece water closet pan white (inclusing seat cover ,fixing bolts, flush cistern 10 ltr capacity) complete all as specified and directed.

S&F in repair Vitreous China Squatting pan, 'Orissa pattern, size 580x440 mm white with integral foot rests including PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float,hockey stick and handle including brackets, complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC vlaveless syphonic action type flushing cistern low level,white with inlet ball valve,float and handle including brackets, complete all as specified and directed.

S&F in repair 110MM PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F in repair 110MM PVC SWR Bends any radius, complete all as specified and directed.

S&F in repair75MM PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as per specified and as directed

S&F in repair 110MM PVC (SWR) P trap, complete all as per specified and as directed

S&F in repair 110MM PVC (SWR) S trap, complete all as per specified and as directed

Separating,scrapping and cleaning of reinforcement and removal from sites complete all as specified and as directed by Engineer-in-Charge.

Taking down CI soil waste or vent pipe 100mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and as directed.

Taking down CI soil waste or vent pipe 75mm bore including all fittings like trapes,bends,junctions etc from any situation complete all as per specified and as directed.

Bends 100mm, diminishing pieces or tapers (larger bore measured, complete all as specified and directed.

Bends 75mm, diminishing pieces or tapers (larger bore measured, complete all as specified and directed.

S&F Cast iron soil, wast and vent pipe (Sand cast pipes) in any length with or without ears, with cement joints, laid in trenches or in floor 100 MM dia, complete all as specified and directed.

Ditto itam No-81 but fixed to wall

S&F Cast iron soil, wast and vent pipe in any length with or without ears, with cement joints, laid in trenches or in floor 75 MM dia, complete all as specified and directed.

Ditto itam No-83 but fixed to wall

S&F RCC hume pipe 300mm dia , class NP2 , laid and jointed complete with collars, complete all as specified and directed.

S&F RCC hume pipe 150mm dia , class NP2 , laid and jointed complete with collars, complete all as specified and directed.

M&L for Concrete bed to 300mm hume pipe, class NP2 including packing under, and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

M&L for Concrete bed to 150mm hume pipe, class NP2 including packing under, and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, 300mm dia, jointed in cement mortar and taking out of trenches, complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, 150mm dia, jointed in cement mortar and taking out of trenches, complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, 75mm outer dia, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.

Cleaning under ground sewage line 100mm dia full of waste solids/liquid mud or sludge deposited in lines by rodding manually or through mechanical means between manholes and removing sludge (obtained from cleaning of sewage line) to a distance exc 100M but n.exc 150M from the site and disposed off as per the directions of Enginer-in-charge.

All as per Srl item No 93 above but 150mm dia of pipe.

Cleaning of RCC hume pipe in culvert of 450mm dia by rodding manually or mechanical means including disposal of waste materials to a distance not exc 50M, complete all as directed by Engineer-in-charge.

All as per Srl item No 95 above but dia of pipe exc 450mm but n.exc 600mm.

Cleaning of open drain of any section / size and removal of waste material (obtained from the drain) to a distance exc 100M but n.exc 150M and spreading the balance near by low laying area, complete all as specified.

S&F chromium plated perforated grating 100/150mm dia over Floor/Nahani trap with or without hole for waste pipe fixed with white cement mixed with pigment to match the shade of floor fixed in repair, all as directed by Engineer-in-charge.

Dewatering/Desludging of manholes (any size), desilting and removing sludge from manholes as in foul conditions and removing of sludge up to distance exc 150M and n.exc 200M and deposited in borrow pits including excavation of borrow pits and covered with 10cm thick layers of soil and disposed off surplus soil, refixing manhole cover extra etc, upto 1.5M depth of manhole, complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 99 above but exc 1.5M depth.

Dewatering / Desludging of liquid / mud / solids (work in foul conditions) from septic tank of any depth and removing sludge out of MOD land to a distance exc 1 Km but not exc 2 Km and deposited in borrow pits including excavation for borrow pits and covered with 10cm thick layer of soil over sludge and spreading the balance near by in low lying area including taking up and refixing of manhole covers of septic tank of 25 users complete as per the direction of Engineer-in-charge.

All as per Srl No 101 above but septic tanks of 50 users

All as per Srl No 101 above but septic tanks of 100 users

All as per Srl No 101 above but septic tanks of 150 users

All as per Srl No 101 above but septic tanks of 200 users (NOTE: For item No 101 to 105. Dewatered/desludged waste shall be conveyed by truck/tractor mounted covered trailers and deposited off as directed beyond MOD land.)

Cleaning of under ground sewage line by excavation and breaking the existing sewage line (minimum two pipe length), removing the blockage, rejoining with new pipe length complete including material and labour, necessary excavation, returning filing, supply of new SGSW pipe grade ‘A’ of required lengths & required bore, haunching the new pipe length with PCC 1:4:8 type D-2 (using 40mm graded single aggregate) all as directed in situations where cleaning is not possible by rodding, at any depth for 100mm dia pipe,, complete all as specified & directed.

all as per item No 106 above but 150 mm bore pipe.

Cleaning / blockage of 'S' trap/'P' trap/WC's (Orissa Pattern/ European/Indian Type) /floor trap/Gully trap,nahani trap,pipe line & manholes in running/flowing order without disturbance by removal of blockage of any type incl all T&P required by deploying 02 Nos Safaiwala and making fully functional at any location and at any floor in the area covered by Mil Stn Nahan incl all the T&P reuired for the purpose complete all as specified and directed by Engineer-in -Charge Note:- (a) The quantity of unclogging chemical as required will be measured and paid for seperately. (b) The contractor will provide 02 Safaiwalas per day for 08 Hrs to attend the above complaints for complete tenure of contract. The quoted rates of the contractor deemed to include the cost of aforesaid manpower. (c) Both the safaiwalas will attend the MES complaint cell at 0900 Hrs to collect the complaint slip and submit the same duly signed by the occupant at 1630 Hrs in the complaint cell after rectification of the complaint. The contractor will be responsible to ensure their attendence and rectification of the complaints. (d) Recovery @ Rs 1000 /- per person per day in addition to no payment if any of the safaiwala found absent. (e) The contractor will ensure the rectification of all complaints irrespective of Nos within 24 Hrs by deploying additional safaiwals if need . Nothing extra will be paid on this account. (f) The contractor shall be solely responsible for supplying all the safety equipments and observing safety rules required by the safaiwalas during working Hrs as per Govt policies in vogue and as amended time to time. (g) All the waste material / sludge shall be disposed off outside MD land.

Cleaning and desludging of existing septic tanks and soakage well of various capacities at different location using suction pumps by mechanical means including removing sludge to outside MOD land and depositing where directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including ,fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

Taking down MCB DB/Meter box/junction box /Ac Box of any size and disposal under schedule of credit and making good disturbed surfaces all as specified and directed.

Taking down old unserviceable light fittings any type and removal from site and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed by Engineer-in-Charge to match with existing surface all as directed.

M&L for point wiring using approved colour coding as per IS ( for Phase and neutral) with copper conductor 1.5 sqmm ( Cross sectional area) single core multistranded FRLS ,PVC insulated and unsheathed cable 1100 volts grade,conforming to IS drawn and including PVC concealed coduit with fittings ISI marked ,terminated in modular switch boxes incl 1.5 sqmm (cross sectional area ) single core ,multistranded ,FRLS PVC insulated and sheathed cable as earth continuity conductor connected to earth dolly for one light point control by one way switch complete all as specified and directed.Note: 1.colour code of wiring should be ( for phase ,red,neutral ,black & earth wire green) 2.Modular switch sockets fan regulators shall be measured and paid separately under respective items deemed to be included in the quoted rates.

- Ditto - all as per item No -113 above but for one ceiling fan/Wall fan/exhaust fan point.

- Ditto - all as per item No - 113 above but one call point controlled by one call bell point.

- Ditto - all as per item No - 113 above but for one 3 pin 5 amp socket on same board all as directed.

- Ditto - all as per item No - 113 above but for one 3 pin 5 amp socket on indipendant board all as directed.

- Ditto - as per item No 113 here in before but with 4 sqmm copper conductor for 15 amp socket with 2.5 sqmm earth continuity conductor

Taking out /dismantling unsv Sub main wiring and S & F Sub main wiring with PVC insulated, FRLS cable 2 single core 6 Sq mm 1100V grade with stranded copper conductor on and incl PVC rigid non metalic conduit (ISI marked) in concealed incl all specials like joint, elbow , Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 4 sq mm for earth continuityconductor complete all as directed by Enginer-in-charge .

All as per item No 119 here in before but 2 run of 4 sqmm and one run of 2.5 Sqmm earth contuinity conductor

S&F of Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S&F of Modular bell push switch, SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S&F of Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and directed.

S&F of Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified and directed.

S&F of Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed.

S&F of Modular Fan step Regulator electronic, 120 watts, 2 Module complete all as specified and directed.

S&F of Modular blanking plate suitable for 1 Module complete all as specified and directed.

S&F of Modular white cover plate incl Modular base frame & powder coated Modular sheet metal concealed box for 12/8 module complete all as specified and directed.

All as per Item No-128 above but 6/4 module complete all as specified and directed.

All as per Item No-128 above but 3 module complete all as specified and directed.

All as per Item No-128 above but 2 module complete all as specified and directed.

S & F of ceiling rose surface backalite 65mm x 50 mm, two to three terminals complete all as specified and directed.

Supply and fix of lamp holder insulated body with back plate suitable for any type of fitting incl one No of LED Bulb 15-18 Watts Base B-22 retrofit type all as specified and directed.

Supply and fixing of Modular Indicator lamp, 2 Module size complete all as directed.

Supply and fixing Electric bell, AC,230 Volts single phase ding dong type complete all as specified and directed.

Supply and Fix MCB protected socket (Modular AC box) 4 module plasic box with 25A cap MCB SP complete all as directed and specified.

Supply and fixing of 25 watt LED batten with opal diffuser ,IP20, battery backup upto 4 hrs.Fitting should have inbuilt 2 No's of Li-on battery of 2600mA each.Housing of fixture should be of extruded aluminium Efficacy of fixture >100LPW,P>F>0.9,THD<30% complete all as specified and directed.Make: Halonix Model No: HLB-08-25-CW-INV or Equivalent in Crompton Greaves,Bajaj,Philips,Havell's.

Supply and fixing of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed. Make :Halonix Model No:HLBH-15-10-CW-INV or equivalent in CG/Philips/Havell's.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC,decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing of 60 watt LED inverter RTC(street light with inbuilt RTC (Real Time clock) for Auto on/Auto Off. Housing made of Pressure die cast aluminium ,top maintainable and with clear heat resistant toughned glass , have secondary lens for better optics, should have LM80 certified LED of CREE,NICHIA, OSRAM,SEOUL make only with constant current RTC enabled electronic driver with 5KV SPD,IP66. Street light shall have inbuilt Li-on battery of 5200mAH and shall have>1.5 hrs battery backup at inverter load in case of power failure,Efficacy > 100LPW,CRI>70,THD<10%,PF>0.95,cut off voltage at 300 Volt + 10% and suitable for 50mm mounting GI Pipe complete all as specified and directed.Make: Halonix Model No: HLSLD-ML04-60-CWL-INV-RTC or Equivalent in Crompton Greaves,Bajaj,Philips,Havell's..

Supply and fix in replacement of security light fitting bracket made up of 32/40 mm dia medium grade pipe of length 0.9 mtr with bending in shape by hot or cold method with 2 nos 50x4 mm MS flate clamps with nut bolts and washer etc all as directed

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc flushed on the existing wall , to match with existing surface and making all necessary connections complete all as directed.

All as per item No: 142 here in before but SPN 12 way, 240 volts complete all as directed.

S&F of isolator DP 63 amp 230 Volt complete all as specified and directed.

S&F of isolator SP, 6-40 Amps, 230 Volts complete all as specified and directed.

M&L for blanking plate suitable for MCB DB's SPN complete all as specified and directed.

Supply and fixing of 60 watt LED inverter RTC(Flood light with inbuilt RTC (Real Time clock) for Auto on/Auto Off. Housing made of Pressure die cast aluminium ,top maintainable and with clear heat resistant toughned glass , have secondary lens for better optics, should have LM80 certified LED of CREE,NICHIA, OSRAM,SEOUL make only with constant current RTC enabled electronic driver with 5KV SPD,IP66. Flood light shall have inbuilt Li-on battery of 5200mAH and shall have>1.5 hrs battery backup at inverter load in case of power failure,Efficacy > 100LPW,CRI>70,THD<10%,PF>0.95,cut off voltage at 300 Volt + 10% and suitable for 50mm mounting GI Pipe complete all as specified and directed.Make: Halonix Model No: HLFLD-ML30-60-CWL-INV-RTC-R or Equivalent in Crompton Greaves,Bajaj,Philips,Havell's.

Supply and fixing of Indoor Decorative LED box type suitable for fixing ceiling/wall with aluminium base directly retro fit LED tube Light , 22 watt, , Color: Cool day light 4 ft white Operating Voltage: 140-270 volts complete with all accessories internally pre wired and including up with three core PVC copper flexible cable of size 23/0.0076 from ceiling rose to connector block complete all as specified and directed LED batten & LED tube rod shall be of same brand.

Supply and fixing in replacement of Energy saving LED street light 120 watt luminaire with high power LEDs with lens of beam angle of 120 degree, luminaire made of pressure die cast aluminium body with built in heat sinks, painted with polyurethan / powder coated paint enclosed with toughened glass incl separate compartment for cable and driver for easy access, during maintenance, suitable for operating on voltage 120-270 volt AC, 50 HZ with driver of solid state covered with seperately fitted surge protection of 5 KV output luminous efficany not less than 100 Lumen / watt, conforming to IP 66 protection class 1 complete all as per manufacturers specifications including taking down old unsv fittings of any size / watt complete all as specified and directed.

Material & labour for 10 watts energy efficient wall mounted inverter LED Bulk Head light fitting ,IP 20,battery backup upto 4 Hrs complete all as specified and directed. Make :Halonix Model No:HLBH-15-10-CW-INV or equivalent in CG/Philips/Havell's.

Supply and fixing of Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit 18W LED bulb with B22 based incl necessary mounting pole of GI tubing light grade suitable dia of required length incl necessary form work , all fixing accessories,monkey menace protection using steel spikes & barbed wire etc and all electric connections and testing complete incl taking out unserviceable fittings all as specified and as directed of Cat No - LHFHASE1TL4K015 of Havells or equivalent in C&S/Wipro. Note: One No of 18 watt LED bulb is included in the quoted rate.

S&F Energy saving LED street light 70 to 75 watt luminaire with high power LEDs with lens of beam angle of 120 degree, luminaire made of pressure die cast aluminium body with built in heat sinks, painted with polyurethan / powder coated paint enclosed with toughened glass incl separate compartment for cable and driver for easy access, during maintenance, suitable for operating on voltage 120-270 volt AC, 50 HZ with driver of solid state covered with seperately fitted surge protection of 5 KV output luminous efficany not less than 100 Lumen / watt, conforming to IP 66 protection class 1 complete all as per manufacturers specifications including taking down old unsv fittings of any size / watt complete all as specified and directed. Make : Halonix Cat No - HLSLD-07-72CW-E or equivalant in Crompton/Wipro/C&S

M&L in replacement of fabrication of sheet metal enclouser to accommodate 04 Nos electric meters of size 800 mm x 500 mm x 150 mm deep and 1.6 mm thick MS sheet, powder coated, bakelite sheet with side hung shutter including provision of locking arrangement and niche covered with 4 mm thick plain glass , including locking arrangement & open Wiring coverd with Flexible Pvc Pipe of suitable size complete all as specified and as directed.

Supply and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated aluminiumconductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm 2 core complete all as directed.Make:Finolex/Havells/RR cables.

Supply and fix of Junction box made out of thermo plastic material of size 240x130x110 mm with provision of single phase cable connector incomming and out going with MCB SP 6-32 amps for security light fitting/PTL IP 65 protection totally enclosed weather proof with cable entry along with GI clamps nut bolts & washer fixed on pole including dismantling/taking out old unserviceale one all as directed.

Taking down and re fixing the existing water geyser/ Ceiling fan/exhaust fan any/type and any size after necessary servicing/greasing complete incl painting all as specified and directed by Engr-in-Charge to match with existing surface

Material and labour for road / path way any type (Concrete) cutting , including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boulders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work, complete all as directed.

Meterial and labour for cement concrete in foundations for pole or any other work type C2 1:3:6 with 40 mm graded crushed stone aggregate all as directed

Earthing complete with Galvanised steel earth plate electrode of size 60cmx 60cm x 6mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below the normal ground level) with top edge of the plate not less than 1.5 m below normal Ground Level connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers and earth lead protected by 15mm dia GI pipe medium grade connected to main distribution board/ earthing test point all as shown on electrical plate No-03 of SSR Part-1 and all as specified including testing on completion.Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bars @ 150mm c/c both ways , GI funnel with watering pipe 20 mm dia, wire mesh, salt and charcoal, protection pipe for earth lead upto 7.50m long complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified in SSR part-II earth lead wire and protection pipe beyond 7.5m shall be measured and paid separately.

M & L for Brick protection for LT cable with sub class "B" bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm with width equal to length complete all as specified and directed by Engr-in-Charge

Sand cushioning with clean dry sand to cables with layer of sand 8cm before laying of cable and 15cm thick after laying of cable complete all as specified. Note : For payment purpose punned thickness of 18cm shall be measured against spread thickness of 23cm as mentioned in para 19.75 of SSR part-I

Supply and fixing in replacement of GI pipe light grade size 40 mm dia for protection of UG cable , Road crossing, complete and incl M & L for Clamps suitable size with nuts, bolts,incl excavation, PCC work for fixing of path way lights complete all as specified and directed.Make:Jindal/Surya/Tata

Ditto- all as per item 162 but size 80mm dia

Supply, laying ,jointing and testing LT XLPE insulated cable screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core including the fixing arrangements, making all incoming and out going connections through the lugs/thimbles incl taking out old defective Under Ground cable from trenches / floor / road / wall / pipe / pole complete all as specified and directed Note :- Excavation & earth work shall be measured & paid separately under respective item of this schedule.

Ditto- all as per item 164 above but size 16 sq mm 2 core

Ditto- all as per item 164 above but size 95 sq mm 3.5 core

Ditto- all as per item 164 above but size 185 sq mm 3.5 core

M&L for earthing complete with copper plate earth electrode of size 60 cm X 60 cm X 3.15 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to copper strip of 20 mm X 3 mm thick by means of brass or copper alloy nuts, bolts, check nut and washer including earthing pit made by PCC (1:3:6 )type C-1, RCC (1:2:4) type A-1 pre cast cover (54cm X 54cm x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab and 15 mm dia medium grade GI pipe for watering with funnel having wire mesh and 40 mm dia medium grade GI pipe for protection of copper strip including providing charcoal or coke and salt in alternative layer of 15 cm complete all as shown in electrical plate No-3 including necessary earth work such as excavation, removal of soil n.exc 50 mtr, returning and refilling dismantling the old unserviceable earthing all as specified and directed.

Supply & fixing of Busbar chamber TPN 8 way comprising of 3 copper strips 100 Amp & one copper strip of cap 63 Amps and minimum length 460mm long enclosed in sheet metal enclosure including all the fixing arrangements, making all incoming and out going connections through the lugs/thimbles all as specified and directed.Make:Havell's Cat Part No: IHBB010008 or Equivalent to Legrand,Siemen.

His Construction Company