Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹41.1 LAccepted-AOC HOWELL ROAD LABAN SHILLONG 793004 | EAST KHASI HILLS | MEGHALAYA | 793004 | L-1 | Accepted-AOC Being Lowest and reasonable | |
| 2 | L-2₹47.7 L+₹5.9 L (14.1%)Rejected-Finance RONGMEN B IV BARAPANI PO SHILLONG 793103 | RI BHOI | MEGHALAYA | 793103 | L-2 | Rejected-Finance Other than Lowest | |
| 3 | L-3₹50.2 L+₹8.3 L (19.9%)Rejected-Finance RONGMEN BLOCK IV NEAR UMROI MILITARY STATION P O BARAPANI SHILLONG 793103 | SHILLONG | RI BHOI | MEGHALAYA | 793103 | L-3 | Rejected-Finance Other than Lowest | |
| 4 | L-4₹51.3 L+₹9.5 L (22.7%)Rejected-Finance | L-4 | Rejected-Finance Other than Lowest | |
| 5 | L-5₹57.5 L+₹15.7 L (37.5%)Rejected-Finance | L-5 | Rejected-Finance Other than Lowest |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
27 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Umroi
Military Engineer Services Garrison Engineer Umroi Umroi Military Station PO - Barapani, Shillong-793 103
SPL REPAIR TO SEWAGE LINE AND BATHROOM OF Ist FLOOR AND 2nd FLOOR OF BLDG NO P 107 and CERTAIN TOILET OF SM BARRACK AND ADDN ALTN TO EXTERNAL SANITARY DUCT PORTION OF BLDG NO 111 AND PROVN OF STAINLESS STEEL RAILING AT UMROI MIL STATION UNDER GE UMR
2022_MES_553352_2
8646/E8
Open Tender
Civil Works
Item Rate
180 days
Umroi
As per NIT
7 documents required · 7 mandatory
₹500
GE Umroi
₹95,000
14 Feb 2023
6 Oct 2022
28 Oct 2022
6 Oct 2022
27 Oct 2022
13 Oct 2022
Amount
Demolition and breaking up drain pipes 150mm bore (salt glazed ware, AC or reinforced concrete) set in cement mortar, complete all as specified and directed.
S&F of Double Wall Corrugated (DWC) HDPE pipes 150 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
M&L for Cement concrete in foundations, type D2, 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Excavating in trenches, n.exc 1.50 m wide & n.exc 1.5 m in depth; for foundation etc. or for shaft , wells , cesspits, manholes, piers holes, etc.n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil. complete all as specified and directed.
All as per item No 4 here in before but depth exc 1.50 mtr but n.exc 3.00 mtr.complete all as specified and directed.
Demolition of cement concrete (reinforced) (reinforced cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided.complete all as specified and directed.
Demolition of precast concrete block walling set in cement morter, complete all as specified and directed.
M&L for precast cement concrete block masonry with solid blocks, type C1 1:3:6 ( using 20mm graded stone aggregate) exc 10cm in width and setting in cement mortar 1:6, complete all as specified and directed.
M&L for renderng 15mm thick in CM 1:4 on internal/external wall surfaces finished even and smooth with using extra cement mixed with WPC as per manufacturing instruction complete all as specified and directed. NOTE:- ( WPC shall be measured and paid separetely).
Supply only Water proofing compound
Demolition of cement concrete of any description and in any position not otherwise specifically provided.complete all as specified and directed.
M&L for Plain cement concrete 1:2:4 type B0 using 12.50 mm graded stone aggregate as in coping , benching/haunching, slightly rounded or chamfred angle and throating etc complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished , and reforming benching as required 150 mm dia of pipe, complete all as specified and directed.
M&L for precast RCC type B-1 1:2:4 ( using 20 mm graded aggregate ) as in cover slab set in CM 1:4 including necessary form work , complete all as specified and directed.
M&L for Mild steel TMT bars 6 mm to 8 mm dia cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern ), including all fittings, heads, shoes, bends, swan necks etc. complete all as specified and as directed.
Supply & Fixing of PVC (SWR) pipe 110 mm bore single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.
Supply & Fixing of PVC (SWR)110mm bore vent cowl complete all as specified and directed.
Supply & Fixing of PVC (SWR)110mm bore bends any radius, complete all as specified and directed.
Supply & Fixing of PVC (SWR)110mm bore bends any radius, with access door complete all as specified and directed.
Supply & Fixing of PVC (SWR)110mm bore junction single (single T), complete all as specified and directed.
Supply & Fixing of PVC (SWR) 110mm bore junction single (single T), provided with access door complete all as specified and directed.
Supply & Fixing of PVC (SWR) 110mm bore junction double, (double T), equal or unequal complete all as specified and directed.
Supply & Fixing of PVC (SWR) 110mm bore junction double, (double T), provided with access door equal or unequal complete all as specified and directed.
Supply & Fixing of PVC (SWR) 110mm bore junction single (single Y), complete all as specified and directed.
M&L for jointing with elastomeric epoxy coating membrane complete all as specified and directed. Make :SIKACEM Aquablock or FIXIT pidicrete URP
Cleaning ,desilting of septic tanks upto 51 to 100 users, of any size & depth from solid liquid/liquid mud etc, and deposited to 4 km to 5 km from site in the hygienic manner and deposited material shall be dump 0.75 m below underground the natural ground level (Rate will be inclusive for excavation of soft/loose soil for deposited material), , complete including pumping out liquid and liquid sluge with pumping arrangements, labour and machine as required, complete all as specified and directed. Note :- (a)Contractor shall arrange the sewage suction machine or sewage pump of minium 5HP along with the equipments to clean the sewage line by super suction machine, MH, septic tank & soakage well etc. and cost in this respect shall be deemed included in the quated rates of respective items and no extra payment on this account shall be made. (b) Labour/workmen engaged by the contractor shall take all requisite preventive safety measures and adequate precautions to avoid any health hazard and the department shall not be responsible any eventualities in this regard. (c) Rate will be inclusive for excavation of soft/loose soil for deposited material.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls etc, laid , bedded and pointed in any mortar, complete all as specified and directed.
M&L for Coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and directed.
M&L for glazed ceramic coloured /printed tiles 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match on verticle surface of wall complete all as specified and as directed.
M&L for 15mm thick screed bed or bedding laying of cement mortar (1:6) for as in floor finishes, complete all as specified and as directed.
M&L for 10mm thick backing coat of cement mortar (1:4) for as in vertical surfaces such as skirting , dados etc, complete all as specified and as directed.
Supply & Fix in repair 15mm Bore bib tap cast copper alloy chromium plated fancy type with crunch or butterfly handle screw down scrwed for iron piupe or for brass funnel and fixed, complete all as specified and as directed.
Supply & Fix in repair Stop valves, fancy type,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.
Supply & Fix in repair brass chromium plated shower rose 125mm size fix to iron pipe 15mm, complete all as specified and as directed.
Supply & Fix in repairs brass chromium plated tubular towel rail, 20mm dia, 60cm long between flanges, complete all as specified and as directed.
Supply & Fix in repairs PVC low level flushing cistern, white, 10 ltrs capacity with float valve and brackets complete including fixing low level flush pipe, complete all as specified and directed.
Fixing only High or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any, complete all as specified and directed.
Supply & Fix of Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted /erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and as directed.
Supply & Fix in repair 15mm bore dia pillar taps, fancy type chromium plated with capstan heads chromium plated screwed down high pressure, with or without lettered 'hotor cold' with long screwed shank and fly nuts screw for iron pipe, complete all as specified and as directed.
Supply and fix in repair 40 mm Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/Cm2 fixed complete to wall ceiling or in floors, complete all as specified and as directed.
Supply & Fix of PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.
Supply & Fix in repairs vitreous china 580x440 mm,"ORISSA PATTERN" with 'P' or 'S' trap size squatting pan (Exclusive flushing cistern and flush pipe) with foot rest complete including provision of cement concrete bedding, complete all as specified and as directed.
Supply & Fixing in repair vitreous china washdown water closet pan (pedestal pattern) white including seat and cover with connected to 'P' or 'S' trap complete all specified and as directed.
Taking up or down GI tubing 15/20mm bore from wall/ceilings including all fittings segrated and stacking the pipe, complete all as specified and directed.
Supply & Fixing Unplasticised PVC pipes of 15 mm dia pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe and making connection with old GI tube/pipe using suitable section complete leakproof, complete all as specified and as directed.
Supply & Fixing Unplasticised PVC pipes of 20 mm dia pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe and making connection with old GI tube/pipe using suitable section complete leakproof, complete all as specified and as directed.
Supply & Fix CPVC pipes of 20 mm outside dia, SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in wall/ceiling or laying in floors, complete all as specified and as directed.
Supply & Fix for CPVC pipes of 16 mm outside dia, SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in wall/ceiling or laying in floors, complete all as specified and as directed.
Cutting existing steel tubing 15mm bore for alterations or additions (Each cut measured) complete all as specified and directed.
Cutting existing steel tubing 20mm bore for alterations or additions (Each cut measured) complete all as specified and directed.
M&L for cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to edges or ends of landings, steps, cills, sunshades, lintels, etc and and cutting chases for concealed water tubing or making good on brick walls cutting not exc. 10 cm in girth, complete all as specified and directed.
Supply & Fix in repairs vitreous china urinal half stall type white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing only flushing cistern with brackets including waste pipe etc, complete all as specified and directed.
Taking down of cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on brick or concrete surface finished even and smooth without using extra cement, complete all as specified and directed
Material and labour for 5 mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces such as soffits of slabs, in patches n exc 1 sqm each finishing the surfaces fair and even complete all as specified and direccted.
Material and labour for renderng 15mm thick in polymer modified mortar CM 1:4 on wall surfaces finished even and smooth with using extra cement mixed with WPC (ISI marked) (3 % by weight of cement) as per manufacturer instruction complete all as specified and directed. Make : :FOSROC RENDEREC HS extra single compund/SICA TOP 120 HS) Note:- ( WPC shall be measured and paid separetely).
Supply only Water proofing compound
Material & Labour for treatment of damp proof top surface of old damp wall surface external/internal by removing the top plastered surface and applying damp proof smart care/pedecrete of approved make like pedelite/Dr. Fixit/Asian and equivalent in 02 coats as in following steps: a) Applying first coat in longitudinal direction and let it be dry for 3-4 hour. b) Applying second coat in transverse direction and let it be dry for 2-3 hour. The mixing of damp proof material shall be done with water, cement/ wall putty/white cement or suitable chemical all as specified and directed by manufacturer instructions.The material shall be approved by GE.
M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and as directed.
Material and labour for three coats of white wash on newly plastered surfaces of ceiling including preparation of new surafaces, complete all as specified and directed.
Material & Labour for applying two or more coats of 100% premium acrlic emulsion paint having VOC less than 50 grn/ltr and UV resistance as per IS 15489-2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltr/10 sqm over and incl priming coat of exteror primer applied @ manufacture instructure, complete all as specified and directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) but area n.exc. 1.5 Sqm each and removing from site complete all as specified and directed by Eng-in-Charge.
Taking down shutters of any description not exceeding 1 Sq. m each and removing from site, complete all as specified and directed by Eng-in-Charge.
Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. M each and removing from site, complete all as specified and directed by Eng-in-Charge.
S&F of Factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed.
S&F of Factory made Solid PVC Double door frame of size 50mm x 95mm single side prelam PVC sheet used instead of Plain colour PVC sheet, reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
S&F of 100 mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and directed.
S&F of 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.
S&F of 150mm aluminum anodised bow handles, complete all as specified and directed.
M&L for 75mm PVC (SWR) floor trap, with grating including jointing with solvent cement, complete all as specified and directed.
S&F of grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.
S&F of Aluminium powder coated [Minimum 50 Micron thick] anodised aluminium ventilator with sliding frame and shutter with 40 x 18 x 1.55 mm thick section for shutters of both gauzed and glazed with 4 mm thick tinted glass/louvered glass, stainless steel wire cloth [0.63 mm nominal dia and avg width of aperture 1.40 mm] in ventilation including necessary jointed, cleats powder coated glazzing clips, powder coated aluminium snap beadings, complete all as specified and directed.
Returning filling in incl spreading, levelling watering and well ramming in layers not exc 25 cm thick in soft/loose soil, complete all as specified and directed.
Removing of excavation material n.exc 50 m and depositing where directed at a level n.exc 1.50 m above the starting point including spreading and levelling all as Specified and directed.
Demolition of cement concrete (unreinforced) above ground floor and pavings exc 15 cm thickness (below or above ground level), complete all as specified and directed.
Material & Labour for 15 mm thick rendering in cement mortar 1:3 on concrete/block walling surfaced, finished even and smooth without using extra cement mixed with WPC @ 3% by weight of cement, complete all as specified and directed. (Note:- WPC shall be measured and paid separtely)
Material & Labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface as in sunken, complete all as specified and directed.
Material & Labour for polythene film black, 50 micron laid in floors, complete all as specified and directed.
Material & Labour for cement concrete (1:7:12) Type F2 (using 40mm graded stone aggregate) laid, complete all as directed and specified
Removing demolished material upto a distance exceeding 250m but not exceeding 500m including loading/unloading and spreading at the destination if required, complete all as directed by Engr-in-Charge.
M&L for 75mm thick PCC 1:3:6, type C-2, as in plinth protection Surface finished even and smooth without using extra cement, complete all as directed and specified
M&L for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in leveling course, complete all as specified and as directed.
M&L for 20mm thick screed bed or bedding laying of cement mortar (1:4) for as in floor finishes, complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid in slop 1:50 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.
M&L for PCC type B1 (1:2:4) (Using 20mm graded stone aggregate) in surface channels and drains etc, complete all as specified and as directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed by Eng-In-charge.
S&F of 10 mm thick toughened glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m fixed with stainlees steel railing using suitable arrangement in each pane complete all as specified and directed by Eng-in-charge.
M&L for Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts/pole/tube etc exc one brickwork but not exc two brickwork and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and directed by Eng-in-charge.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed by Engr-in-charge
Material and labour for point wiring for the One light/fan point controlled by one, one way switch with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including medium grade PVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed.
All as per serial item No 92 here in before but for one 3 pin 5 Amp socket outlet on independent board.
All as per serial item No 92 here in before but using 2.5 sqmm PVC FRLSH insulated copper conductor wire for 15 A socket on independent board.
Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way in white colour complete all as specifed/directed.
Supply and fixing switch socket (white Colour) out let combination multipurpose 3/5 pin, 5 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) with white colour, independent board, complete all as specified/directed.
Supply and fixing switch socket (white Colour) out let combination multipurpose 3/5 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) with white colour, independent board, complete all as specified/directed.
Supply and fixing of ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed.
Supply and fixing of bulb holder angular PVC/Polycarbonate suitable for batten fitting including LED bulb of 9 Watt B22 (Warm white), complete all as specified/directed.
Taking down carefully and refixing of old existing any size/type of exhaust fans with complete accessories, complete all as specified and directed.
Supply and fixing compact commercial batten suitable for single T8 LED tube fitting 1x18/20 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC squre/round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23 x 0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed. Cat Part No: For Crompton Batten-DMLN1LT8 -16, for LED TUBE Rod No. LGT8-20-865-2 or equivalent cart part no. to Havells or wipro.
Schedule of Credit
M/S UB ENTERPRISE
M S Umesh and Co
M/S C.M.V CONSTRUCTIONS
M/s Sohini Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .