Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical All documents are as per NIT requirement |
| 2 | Accepted-Technical | Accepted-Technical All documents are as per NIT requirement |
Tender Value
₹3.7 L
EMD Value
₹7,482
Closing Date
6 May 2026, 6:00 pmClosed
Executive Engineer (C),
Civil Division Muzaffarpur
Aluminium partition with available serviceable aluminium section and antistatic flooring in switch room ,C-DOT bldg. at Companybagh, Muzaffarpur
2026_BSNL_275799_1
03/NIT/CD-MZP/26-27
Open Tender
Civil Works
Item Rate
30 days
As per tender document
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
Yes
BSNL
₹7,482
Yes
11 May 2026
27 Apr 2026
8 May 2026
27 Apr 2026
6 May 2026
28 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | |||||
| 2Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:Note:- Aluminium hinges shall not be used in wooden shutters , Stainless steel hinges shall be preferred (a) 125x75x4 mm | |||||
| 3Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a) 250x16 mm | |||||
| 4Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (a) Twin rubber stopper | |||||
| 5Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : | |||||
| 5.01 | (a) For fixed portion (i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | - | kg | - | - |
| 6Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. (a) Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. | |||||
| 7Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (a) With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | |||||
| 8P/F homogeneous Antistatic sheet flooring and skirting of approved company like Krishna Vynil,Wonder Floor etc. in approved pattern on a smooth and damp proof base using rubber adhesive of approved quality and manufacturer like Dunlop-S-758,Fevicol SR-998 or equivalent, including rolling with light wooden roller weighing about 5 kg. including repairing of damaged floor where ever necessary all complete as per direction of Engineer – in – Charge. (a) 2.00 mm thick sheet | |||||
| 9Dismantling of existing damaged antistatic flooring i/c cleaning of floor etc. complete as per direction of E-I-C. | |||||
stage.html
html • 0.02 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.95 MB
NITMZPALUMINIUM.pdf
Tender Documents • 2.93 MB
BOQ_322127.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .