REPAIR/ MAINT / REPLACEMENT OF OLD UNSV FLOOD LIGHT, POST TOP LANTERN FOCUS LIGHT SECURITY LIGHT GATE LIGHT BLDG SECURITY LIGHT MCBs DBs METER PANEL BOX AND ALLIED WORKS UNDER AOR OF AGE E/M (WEST) LUCKNOW

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, bell push, light fitting etc for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed

M&L for point wiring complete for one light point or one fan point controlled by one, one way 6 Amp switch with PVC (FRLSH) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn into existing conduit, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLSH) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed

S&F switch piano flush button single pole one way 6 Amp 240 volt complete all as specified and directed.

S&F in repair ceiling rose surface bakelite three terminal complete all as specified and directed

S&F in replacement PVC gang box 1 way, suitable for fitted piano type 6A switch, 230 Volts complete with pvc gitties and screws all as specified and as directed

S&F in replacement switch piano flush button single pole one way 6 Amp 240 volt complete all as directed by Engr-in-charge.

S&F in repair PVC casing and caping 15/20 mm wide complete all as specified and as directed by Engr-in-charge.

S&F in replacement for 1.5 sqmm single core copper,multistandard PVC insulated (FRLSH) unsheathed, cable 1100 volts grade complete all as specified and directed

S&F in replacement bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 Ik 07 protection cover suitable for bulk head fitting integrated type 10W LED, 6500K , 100 lumens/watt including inbuilt electronic driver complete all as specified and as directed

S&F in replacement LED Building security light 20/25 Watt with high power LED source (>120 lumen/watt) PDC housing, IP66 and IK 08 with 4 KV inbuilt surge protection ,minimum 50000 burning hours hv cutoff@325/440 volt protection for 8 hours including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed

S&F in replacement LED building security light of 35/36W Led Street Light made up of pressure die cast aluminium housing with Polycarbonate cover and unique road optics for better uniformity. The luminaire shall be with higher ingress protection IP66 and impact resistance of IK07. Operating voltage range: 140-270V/50Hz, Lumen efficacy of LED >120Lm/W, CRI≥70, CCT-5700K, & SDCM<5.minimum 50000 burning hours Powered by built-in potted LED driver gives constant light over wide voltage range. Shall have High Voltage cut-off@325V & safety from 440V (P2P) for 8 hours. Surge protection 4 kV, Power factor ≥0.95, THD ≤10 including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 1.5 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed

S&F in replacement 45W pressure Die cast aluminium housing building security light with system lumen of 6300lm & system efficacy of 140Im/W, IP66, IK10, Single piece die cast including spigot, dia 48-76mm, LED Lifetime (L70B50) 75K Hrs with integrated optical cover. Streetlight should have standalone lighting control system with AUTO on/off based on Dusk/Dawn timings, preset time setting with monthly variation(Jan to Dec.), inbuilt Real time clock for switching, includes dimming profile for energy savings, drift not exceeding max 2mins per year, clock retention upto five years, auto switching off secondary power for module, dimmable driver based on PWM control, dim to off with High/Low Voltage cut off with 440V protection for 8 hrs for complete luminaire including driver and Astro module, EMI/EMC complaint as per EN55015,IEC61547.surge protection as per IEC 61000-4-5,driver meeting IEC61347,complete luminaire meeting IEC60598-2-3-2002, Luminaire manufacture shall provide LM79 report from NABL/UL accredited lab & LM80 report issued by LED manufacturer. Both the fixture and Driver should be of same make & must have separate BIS approval complete all as specified and directed by the Engr-in-Charge.

Suply & Fixing in replacement GI bracket for street light fittings fabricated with GI tubing 32/40mm dia 'light grade' 1.2 mtr long and bending to angle of 120 degree including mild steel clamp of suitable size and nut bolts with two coat aluminium paint suitable for fixing on PCC/steel poles complete all as specified and directed

S&F in replacement LED 30 W flood light Warm/day cool as required, (120 lumen/watt), Aluminium Pressure Die Cast housing with IP66 ingress protection and IK 07, average life 50000 burning hours with 4KV inbuilt surge protection potted driver with high power LED complete with including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts, bolt and Incl all PCC 1:2:4 agrregate and all Earth work complete all as specified and as directed by Engr-in-charge.

S&F in replacement integrated LED type Post top lantern with high power 25/30 W LED and IP 65 and IK 05 with 4 KV Surge protection as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun aluminium landscape lumainaire incl LED driver suitable for 40/50 mm GI Pipe and including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts, bolt and Incl all PCC 1:2:4 agrregate and all earth work complete all as specified and as directed

S&F in replacement LED gate light of 40/45W LED Postop lantern luminaire with aluminium pressure die-cast mounting spigot & polyester powder coating in addition to a specific weathering resistance treatment, color RAL7011. Non-yellowing transparent Polycarbonate UV-protected round symmetrical diffuser with circular radial pattern for glare-free and even light distribution. High Efficiency long life LED module with efficacy of >100Lm/W, CCT 4000K, and CRI >70. Powered by built-in electronic driver with THD <10%, 4kV inbuilt surge protection, high cut-off at 325V & auto-restart, including 8hrs. protection from 440V (P2P). Incl GI Pipe 40mm dia 0.45mtr long fixed in gate pole with PCC 1:2:4 of 0.20 mtr height and size of existing gate pole. Fixture lumen efficacy >4500 Lm, IP66 (no glue), IK05, PF>0.95, Operating voltage range: 140- 277V, complete all as specified and as directed

S&F in replacement integrated LED type Bollard , 10/12 W LED as light source, IP 65,IK 07 minimum hieght 750mm AL PIPE HOUSING , PF0.95 AND SBD 4KV energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution incl LED driver with base plate and pcc and earth work for grouting the light complete and incl neceesary electrical connection complete all as specified and directed

S&F in replacement Solar LED Bollard Light Outdoor type height upto 600mm, IP 65 dust-proof and water resistant (inbuilt panel, battery, cc, 9-10 hrs backup) Garden, Pathway Light for Decoration, Warm White ,Panel Peak Wattage : 2.2 W watt, 300 lumen, 3000k CCT, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution incl all PCC 1:2:4 agrregate and all Earth work complete all as spacified and directed

S&F in replacement Solar LED Gate Light Outdoor type height upto 213mm, IP 65 dust-proof and water resistant (inbuilt panel, battery, cc, 9-10 hrs backup) Warm White, Panel Peak Wattage : 2.1 W watt, 300 lumen, 3000k CCT, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution incl all PCC 1:2:4 agrregate and all Earth work complete all as spacified and directed

S&F in replacement outdoor type Flexiion 20 Mtr LED strip IP65 Water-Proof Rope and Strip Light, 3000K/6000K CCT as required on site with wide viewing angle for good light distribution, easy to install and energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution incl suitable driver and including provn of flexible three core cable from ceiling rose to fitting terminal for making electrical connection complete all as specified and as directed

S&F in replacement wall/surface mounting Modern style LED Picture/Name plate/Mirror Light for Display 2 feet, 7/10 W, Warm White glow (>80 lumen/watt), IP 66 dust-proof and water resistant with Flexible neck for adjusting light angle, 3000/4000/5700 K, 230V, with Polycarbonate & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed

S&F in replacement PVC Junction box (SMC), aesthetically designed factory fabricated, weather proof with arrangement of incoming and outgoing feeder with bus bar of suitable capacity for termination of line with single MCB SP, 230 Volt, upto 16 amps, breaking capacity 10 KA for control including copper conductor 1.5 Sq mm from feeder pillar to light fitting complete all as specified and directed

S&F in replacement in commissioning of garden pole size 40 mm dia, upto 1.5 metre long, GI pipe light grade, duly painted with two coats of synthetic enemal paint fixed on pole including with nuts, bolts grouting in ground Incl PCC 1:2:4 aggrregate and all Earth work complete all as specified and directed.

Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 10 Sq mm 2.0 core stranded condector nominal cross section all as directed

Excavation in trenches n exc 1.5m wide and n. exc 1.5m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5m in depth and getting out complete all as specified and directed

Returning filling including spreading leveling watering and well ramming in layers n. exc 25Cm complete all as specified and directed by Engr-in-charge.

Removal of excavated material/surplus soil to a distance n exc 50m and depositeing where directed at a level n exc 1.5 m above the strting point complete all as specified and directed

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and directed

Boring/Drilling ( horizontally) manually under existing road ( maximum 10 M in width) suitable for passing GI tubing of 40 to 80 mm bore complete all as specified and directed

S&F in replacement GI tubing 'Light' grade 50 mm for cable protection fixed in poles/walls/laid under roads/crossing etc incl taking out the rusted pipes of following sizes, complete all as specified and directed

S&F in replacement three core PVC insulated FRLSH sheathed cable with 1.5 sqmm stranded copper conductor complete all as specified and as directed

S&F in replacement sheet metal enclosure for VTPN DB 4 way double door type fabricated out of high quality CRCA sheet suitable for 4 pole MCCB 63-125A, 415 V as incoming & SP/TP MCB as outgoing 125/200 Amps rated Busbar, inter connection link, cable ties,earth bar IK09, True IP 43 (with PU Gasket) with test certificate etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed Note: MCCB & MCB to be measured and paid seprately.

S&F in replacement sheet metal enclosure for MCB DB double door type fabricated out of high quality CRCA sheet for Triple pole and neutral 4 way 415 Volts with 200 Amps rated bus bar of suitable size plate and common neutral link,adjustable DIN Channel, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate ,factory made complete without MCB and with enclosure blank plates for unused way and fixed properly on wall with suitable size ms flat iron with nut bolts washer etc complete all as specified and directed

S&F in replacement sheet metal enclosure for MCB DB double door type fabricated out of high quality CRCA sheet for single pole and neutral 12 way 240 Volts with 125/200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way and fixed properly on wall with suitable size ms flat iron with nut bolts washer etc complete all as specified and directed

S&F in replacement sheet metal enclosure for MCB DB double door type fabricated out of high quality CRCA sheet for single pole and neutral 8 way 240 Volts with 125/200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way and fixed properly on wall with suitable size ms flat iron with nut bolts washer etc complete all as specified and directed

S&F in replacement sheet metal enclosure for MCB DB double door type fabricated out of high quality CRCA sheet for single pole and neutral 4 way 240 Volts with 125/200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way and fixed properly on wall with suitable size ms flat iron with nut bolts washer etc complete all as specified and directed

S&F in replacement sheet metal enclosure for DB SPN 2 ways, 240 V complete fixed properly on pole/wall with suitable size ms flat iron with nut bolts washer etc complete as specified and directed

S&F in replacement 125 Amps rating, 25 KA breaking capacity, Four pole MCCB with thermomagnetic release, suitable for three phase supply voltage of 415V, 100% isolation and On/Off/Trip shall be clearly indicated on the front facia of MCCB. All poles shall be 100% protected including neutral at rated current. MCCB shall have Utilisation category "A", with line load reversibility to allow cable connection on top or bottom and thermal magnetic release with over current and short circuit protection,also have test button to check the heathiness of trip release. MCCB shall comply with the requirements of the relevant standards IS 13947 –Part 2 /IEC 60947-2 with valid test reports complete all as specified and directed

S&F in replacement 100 Amps rating, 16 KA breaking capacity, Four pole MCCB with thermomagnetic release, suitable for three phase supply voltage of 415V, 100% isolation and On/Off/Trip shall be clearly indicated on the front facia of MCCB. All poles shall be 100% protected including neutral at rated current. MCCB shall have Utilisation category "A", with line load reversibility to allow cable connection on top or bottom and thermal magnetic release with over current and short circuit protection,also have test button to check the heathiness of trip release. MCCB shall comply with the requirements of the relevant standards IS 13947 –Part 2 /IEC 60947-2 with valid test reports complete all as specified and directed

M&L in replacement for Submain wiring with two single core unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 6.0 sqmm nominal cross sectional area Multi-stranded copper conductor and one single core green unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 6.0 sqmm Multi-stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 25 mm dia including all conduit and fixing accessories existing in wall including cutting chases in wall and making good to the disturbed surface to match the existing colour code with 1mm putty taking out the unserviceable sub main wiring complete all as specified and directed

M&L for laying in replacement 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular stranded 6 sqmm aluminiuam conductor drawn through non metallic rigid PVC conduit 20 mm dia including earth Work, Excavation, Returning filling, Removal of excavated material/surplus soil, sand cushioning complete all as specified and as directed

S&F in replacement 1100V grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection ,one twin core cable flat or circular stranded 10 sqmm aluminiuam conductor complete all as specified and as directed

S&F in replacement MCB, Triple pole & neutral 100 Amp, 415 volts, 16 KA breaking capacity, 'C' curve complete all as specified and directed

S&F in replacement MCB, Triple pole & neutral 63 Amp, 415 volts, 16 KA breaking capacity, 'C' curve complete all as specified and directed by Engr-in-charge.

S&F in repair MCB, Single pole & neutral 40 Amp, 240 volts 10 KA breaking capacity, 'B' curve complete as directed

S&F in repair MCB, Single pole & neutral 63 Amp, 240 volts 10 KA breaking capacity, 'B' curve complete as directed

S&F in replacementr MCB, Single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'B' curve complete all as specified and directed

M&L in repair Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and as directed

M&L in repair Galvanised iron strip 32 x 6mm buried in ground with saddles and fixing screws etc. for roof conductors and down conductors above ground. complete all as specified and directed.

M&L in repair for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and directed

M/s PS Associates (BID ID -3395377)

M/S BHAGIRATHI ENTERPRISES (BID ID -3401336)

Joy Dey Enterprises (BID ID -3406816)

M I & CO. (BID ID -3401886)

m/s raghubar dayal (BID ID -3409057)