GE (N) P/TOKEN- 87 OF 2023-2024REPAIRS TO SANITARY FITTINGS, FLOORS, JOINERY MISC B/R WKS IN THE AREA OF RS ROAD, TARAPORE ROAD AND CERTAIN AREA OF AGE B/R (CENTRAL) UNDER GE (N) PUNE

Amount

M&L for preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying two coat of plastic emulsion paint complete all as specified and as directed.

M&L for preparation of old treated plastered surface of ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying two coat of plastic emulsion paint complete all as specified and as directed.

M&L for preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying two coat of lustre paint (Oil Based) of ASIAN paint or equivalent of Berger/ Nerolac complete all as specified and as directed.

M&L for preparation of old treated plastered surface of ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying two coats of lustre paint of ASIAN paint or equivalent of Berger/ Nerolaccomplete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of royale luster emulsion of asian paints or equivalent complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of royale luster emulsion of asian paints complete all as specified and as directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of royale luster emulsion of asian paints or equivalent by complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying two coats textured paint including base coat of asian paints or equivalent complete all as specified and as directed.

M&L for scrapping out old treated wooden surfaces in floors, staircase etc ,sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two or more coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed.

M&L for scrapping out old treated wooden surfaces in door/windows sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two or more coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed.

M&L for scrapping out old treated wooden surfaces in ceiling sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two or more coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed.

M&L for preparation of surfaces and applying one coat of 100% acrylic exterior emulsion paint to mangalore tiles on roof, parapet wall etc, on building complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of old decorated surfaces and applying one coat of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of old decorated surfaces and applying two coat of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.

M&L preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying two coat of acrcylic distemper complete all as specified and as directed.

M&L for applying two coat of Oil bound distemper over a coat of primer over a layer of wall care putty (1 to 1.5 mm thick) on wall surfaces including complete removal of existing treatment all as specified and directed.

M&L for applying two coat of Oil bound distemper over a coat of primer over a layer of wall care putty (1 to 1.5 mm thick) on ceilingl surfaces including complete removal of existing treatment all as specified and directed.

M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old painted wooden/asbestos surface in ceiling and applying one coat of synthetic enamel paint

M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint.

M&L for preparation of old treated plastered or unplastered/ concrete surfaces by brooming down with steel brush over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling floor, hearth or wall tiling/paver block/chequered tiles including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm aggregate) Cement concrete as in sub base including demolition of damaged PCC sub base complete all as specified and as directed

M&L for double charged vitrified ceremic tiles 10 mm thick of approved shade/ wooden texture (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in flooring etc , laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade complete all as specified and directed.

M&L for double charged Vitrified ceremic tiles 10mm thick of approved shade/Wooden texture as in vertical surfaces, skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade over and including backing coat of 10mm thick in cement mortar 1:3 complete all as specified and directed.

M&L for 25mm thick coloured Glossy rubber moulded Chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.20sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L Machine pressed rubber moulded glossy finish precast concrete interlocking paver block any shape and size confirming to IS- 15658-2006 of 60 mm thk, M35 gde in floor/ pavment laid over and including 30 mm thick crushed sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. Note- (i) Manufacturer test certificate shall be submitted along wth Sample.

M&L for textured heavy duty exterior ceramic tiles of size 300mmx300mmx10mm thick as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 20mm thick in CM (1:6) complete all as directed.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 15 mm thick cement mortar 1:4 complete all as specified and directed.

- Ditto- all as per item No 31 above but in skirting / dado ( area n.exc 0.09 Sqm) on vertical surfaces incl 10 mm thick backing coat cement plaseter in 1:4 complete all as directed

M&L for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting as highlighter of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7mm thick as in dado/ skirting as highlighter of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

M&L granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like over and including 15 mm thick screed bed of CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.

M&L for Machine cut cudappah stone slab 20 to 25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab all as directed by Engineer-in-Charge.

M&L 40mm thick plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in floor/ court yard, finished even and smooth with using extra cement including demolition of existing cement concrete removing rubbish off the premises complete all as specified and as directed.

S&F Glass dividing strips 3mm thick and 38mm width of strip complete all as specified and as directed.

M&L 75 mm thick plain cement concrete (1:3:6) type C-1 using 20mm graded stone aggregates as in plinth protection, concrete shall be laid in alternate bays not exc 3.0m in length, finished even and fair including demolition of existing cement concrete removing rubbish off the premises complete all as specified and as directed.

M&L Brick work with fly ash old size bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6 including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement upto 12.0m height of Bldg with using @ 2% WPC of cement complete all as specified.

M&L for rendering 15 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement upto 12.0mtr height of bldg complete all as specified.

M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of new plastered surfaces of wall and applying two coats of Oil bound distemper of any tint over a coat of primer over a thin layer (1 mm to 1.5 mm) of wall care putty upto 12.0mtr height of Bldg complete all as specified.

M&L for removing of plants, bushes, weeds with roots from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , waste water pipe, bends and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measures required for working on or up to height of 15 metres vertical slopes)

S&F for mild steel work in tubular /square/rectangular trusses , purlins etc including special shaped washer etc. complete using hollow mild steel sections round, square or rectangular for structural use as in main and cross beams, hip and jack rafters, purlins conforming to IS 4923:1997 fixed with angle cleats or other connecting plates complete all as specified and as directed.

M&L for mild steel framed work such as in doors or gates etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings

Dismantling of asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete including dismantling unserviceable asbestos/ Galavalume sheet (Corrugated, Semi corrugated etc.) sheets all as specified and as directed.

-Ditto- all as per item no 58 above here in before but plain sheets on riges,valley gutters and similar works etc complete all as directed

Dismantling structural steel work including doors, gates, framed truss etc. complete all as directed.

M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying redoxide primer and two coat of synthetic enamel paint.

Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed

All as per item No 57 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed

Taking down old door shutter exc 1.0 sq. m but n exc 2.0 sqm each complete all as specified and directed

S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm includinguding 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed.

S&F for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed

S&F for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Part-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F for stainless steel wire cloth 0.63 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed

S&F factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick PVC lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed. NOTE: During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum, all as specified and directed. NOTE: During fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F in repairs 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts, ISI marked, complete all as specified and as directed.

S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

S&F in repair brass butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping brass plated and length of screw not less 38 mm

S&F in repairs brass floor door stopper, overall length of cover plate 150mm all as specified and as directed.

S&F in repairs150mm, Mild steel helical door spring, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified.

S&F in repairs chromium plated two way bib cock with wall flange 15mm dia Cat No. QQT 7041 of make Jaquar ‘QUEEN'S series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated fittings angular stop cock with wall flange 15mm dia Cat No. QQT 7053 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated pillar cock 15mm dia Cat No. QQT 7011 of make Jaquar ‘‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated single towel rail 600mm long including built in side brackets ,Cat No. AQN-7711 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated toilet paper holder ,Cat No. AQN-7751 of make Jaquar ‘‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated towel ring round, Cat No. AQN-7721 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs chromium plated wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with wall flange with 115mm long bend pipe, connecting legs ,Cat No. QQT-7281 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs hand shower (health faceut)ABS body with 1m long flex tube in chrome finish and wall hook cat part no ALD CHR 585 of make Jaquar ‘ or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs soap dish holder cat part no AKP 35173P of make Jaquar ‘ or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs overhead shower 150X150mm (body and plate stainless steel) with shower arm OHS CHR 1605 of make Jaquar ‘ or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repair 5 mm thick float glass looking mirror including with 04 Nos studs for fitting complete all as specified and as directed.

S&F in repairs, chromium plated long body bib cock with wall flange 15mm dia Cat No.FUS 29037 of make Jaguar or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs vitreous china wash down rimless wall hung water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, P trap 250mm, complete all as specified and as directed. Make :- Jaquar Cat No. FLS-WHT-5953PPSM or equivalent make as per Appx 'A' as approved by GE

Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal all as directed.

Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal all as directed.

M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs complete all as specified and as directed.

M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and as as diirected.

Refixing 20mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as directed.

Refixing 15mm dia old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) complete all as directed.

S&F in repairs 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as spd

S&F rotational moulded polyethylene water storage tank 3 layer black/white colour water tank, non- toxic effect, algea foRMation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 2000 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed.

S&F in repairs brass Mortice lock, vertical type, size 100 mm 4 Levers complete all as specified and as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets, ceiling grid etc complete all as directed.

M&L for semi perforated 12 mm thick micro tegular edged or 10 mm squar edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO.50 to 0.75 as per IS-8225; 1987, Noncombustible as per BS-476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal. T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per Sqm incl both sides) comprising of main-T runners of size 15 x 32 mm of length 3000 mm, cross-T of size 15 x 32 mm inteRMediate cross-T of size 15 x 32 mm of length 600 mm to foRM grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24 x 24x o.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out upto 12 Mtr height as per specifications, drawing and as directions of the Engr-in-Charge.

M&L for 10 mm thick Gymsum board (mositure resistant) seamless as in the ceiling/ linning fixed with counter sunk screws on and incl GI channels frame work of stardard section as per manufacture,s instructions, fixed @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangmentat their junction point at desired heights below roof slab and incl two coats of plastic emulsion paint over a coat of primer on exposed surfaces. (The frame work shall be fixed with the help of GI suspenders of suitable size with the help of dash fasteners and along wall, making good disturbed surfaces, smoothening the gypsum board, POP lining at joints as required) including dismantling of existing board complete all as specified and directed. Make : Gyproc-saint Gobain/Armstong/Diaken.

M&L for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm and fixed in decorative pattern including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer matching with the colour of ceiling complete all as specified and as directed.

S&F for fibre glass reinforced translucent corrugated/plain sheeting 2.00 mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc including taking down existing complete all as specified and as directed.

S&F in repairs for brackets for drapery/ curtain rod, decorative type, stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed.

S&F in repairs for drapery/ curtain rod of 25mm dia, decorative type, stainless steel complete all as specified and as directed.

M&L for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down of existing complete all as shown on drawing and as directed.

S&F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. includinguding taking down with existing one complete all as specified and directed. Make: Action tesa, Century, Kitply

S&F auto closing hinges with stainless steel screws including taking down with existing one complete all as directed

S & F continuous (piano) hinges, stainless steel, width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in roof padding mixing of WPC @ 2% by weight of cement, of any thickness finished fair and even incl demolition of existing complete all as specified and as directed.

M&L for water proofing treatment to RCC roof slab complete all as specified below and as directed:- (a) Complete Removal of existing waterproofing treatment / membrane including screed bed/ plaster and removing the material where directed to a distance not less than 500m and cleaning the roof surface with water (b) Providing 10 mm thick plaster on roof surface in CM (1:4) with using WPC as per manufacturers instructions. (c) Cleaning the plastered surface and applying Oil Based Bituminous primer @ 0.25 ltrs/ Sqm. (d) Applying hot blown bitumen of grade 85/25 @ 1.20 Kgs/ Sqm. (e) Laying APP Modified bituminous membrane 3mm thick weighing not less than 3.50 Kgs/ Sqm with non woven polyester mat as reinforcement with plain finish laid over hot bitumen on roof surface. (f) Applying two coats of bituminous aluminium paint on APP membrane surface. (g) Overlaps (end and longitudinal) shall be finished by torch application. Note No (i) : Overlaps shall be provided as under End Over Laps - 150mm Longitudinal overlaps 100mm. (ii) : Waterproofing Compound shall be measured and paid separtely under relevant item.

Supply only Liquid water proofing compound complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position for capacity of tank exc.500 litres and n.exc. 1000 litres complete all as directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position for capacity of tank exc.1000 litres and n.exc. 2000 litres complete all as directed

Dismantling of old wooden flooring planks/ boarding removing serviceable planks to store and removal of rubbish outside MD land at the location decided by Engineer-in-Charge complete all as specified and as directed.

M&L for 25mm thick 1st Class Hardwood planks (Boarding) Teak wood of required size or as approved size, Cross sectional area not less than 50 Sqcm in flooring with interlocking arrangement of tongue and groove joint and applying two coats of melamine filler complete till fine glossy finish is obtained complete as per manufacturers instruction.

Refixing of old wooden flooring obtained from dismatling after cutting damaged edges, burning of old paint if any, and preparation of wooden surfaces and applying two or more coats of melamine polish using spray gun over a coat of sealer and melamine filler complete till fine glossy finish is obtained complete all as specified and as directed.

Dismentling wooden scantling of any size and position all as directed.

M&L for 2nd class hard wood, clean sawn, in scantling timber work all as specified and as directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as directed.

M&L for 2nd class softwood palin fillets, squar/rectangular in section, clean sawn, secured with nails or brads sec exc 13 sqcm but n exc 25 sqcm including dismantling of existing complete all as specified and directed.

M&L for 12mm thick plywood, grade BWR,type BB, number of ply 09 nos, fixed with fevicol and nails for working table/storage almirah to the size and pattern fixed with wooden frame work, including taking down existing plywood complete all as directed

S&F for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work complete all as directed

M&L for preparation of new wood or wood base surfaces and applying malamine polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as directed.

S&F in reapirs Designer AC Eaves/ Weather Boarding 12mm thick , any size shape and design as approved by GE including taking down existing boarding upto 15 Mtr height of building complete all as specified and as directed.Make: V-Board(Visaka Industries Ltd)/Everest

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

VIRENDRA FABRICATORS

Sai Construction

L.T Associate

K.K.Enterprises

J P ASSOCIATES

M/S AKASH ENTERPRISES

M/S Eknath agencies

N B ENTERPRISES

Pratap enterprises