PROVISION OF GLOW SIGN BOARDS AT R53 AND H2 PLOTS PROVISION OF HAND RAIL CHEQURED TILES ON RAMP ON MI ROOM ENTRANCE AND ADDITIONALTERATION TO DOORS OF CERTAIN ROOMS AT ICGS RATNAGIRI

Excavation in trenches not exceeding 1.50 metres wide and not exceeding 1.50 metres in depth and getting out in Soft/disintegrated rock complete all as specified and as directed.

Excavating in post holes each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft disintegrated rock complete all as specified and as directed

Material and Labour for providing PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Material and labour, PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

Supply and Fixing for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. of Fe 410-W (Grade-E250, Quality A, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Material and Labour for Mild Steel plates of grade Fe 410 Grade E-250 quality A as in roof trusses (framed) trussed, etc. connecting with bolts/welding as baseplates/connecting plates etc complete all as specified and as directed.

Material and Labour for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified.

Material and Labour for Machine cut laterite walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified and directed.

Material and Labour for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra lime or cement complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and wall ramming in layer not exceeding 25 cm, in Soft/disintegrated rock complete all as specified and as directed.

Removing excavated rock material exceeding 50 metres but not exceeding 250 metres and depositing where directed complete all as specified.

Supply and fix anodised aluminium powder coating minimum thickness of powder coating 50-micron frame for doors windows, ventilators and partition section or in any other type of work with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.

Supply and Fix of logos or glow sign board or like work of any description, any design/ shape/ mounted on any height made up of coloured or transparent acrylic or polycarbonate sheeting of 5 mm thickness of approved texture and colour by Engineer-in-charge for exterior application, including suitable LED Lights for glowing effects, filling the joints of each panel with silicone gel to match the colour of surrounding sheet panels for superior finish all along the periphery, including necessary fitting fixtures, lightening arrangement from a distance up to 100 metres switch-socket boards etc. as approved all as specified and directed. Note: The structural design & drawing shall be prepared & submitted by the contractor for approval by Accepting officer, after tender acceptance & before execution of work.

Taking down cement plaster any description on Laterite masonry or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as directed.

Material and Labour for 100 mm thick Cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) for floor finishing & plinth protection complete all as specified & as directed

Material and Labour rendering 15mm thick in cement mortar (1:4) in two layers, 5mm thick using WPC at 3% by weight of cement over 10 mm thick on fair faces of Laterite stone masonry or concrete, surfaces with finished even and smooth without using extra cement complete all as specified & as directed Note: WPC will be measured and paid separately.

Supply only integral water proofing compound conforming to IS 2645-1975, IS -9103 complete all as specified and directed.

Material and Labour for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. set and jointed in neat cement slurry and pointed in white or colour cement match over 20mm screed bed 1:4 complete all as specified and directed.

Material and Labour for Granite of 20mm thick (any type) of work (table rubbed and polished) in steps, jambs, pillars, window cills cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm screed bed 1:4 complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc. complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4.00 Sqm each and removing from site or to store as directed by Engineer in charge.

Material and Labour rendering 10mm thick on Laterite stone masonry surfaces or surface other than fair face of Laterite stone or on one side of lathing with cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed.

Material and Labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc. complete all as specified and as directed.

Material and Labour for 12mm thick Toughened glass as in hinged, partitions, automatic doors, fix in position of any description and any position and similar work having embossment of approved logo's, designs, borders with standard colours through chemical colour etching, balance portion of doors having no opacity through chemical etching including cutting to shape, drilling holes, fixing to the hinges, frames, door closer etc. complete all as specified and as directed.

Material and Labour for 4mm thick plain sheet glass ordinary quality and glazing with oil putty in squares, exceeding 0.5 Sqm in each pane complete all as specified and directed.

Supply and Fix of SS 304 grade mirror/matt pre-polished, rectangular/L type patch fittings suitable for 12mm thick toughened glass doors/panels at hinged portion including drilling holes and securing glass with necessary clamps, screws, silicone gasket etc. complete all as specified and as directed.

Supply And Fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed

Supply And Fix SS 304 grade pull handle H type of size 22x300mm along with rubber gasket to fix on outdoor 12mm toughened glass doors complete all as specified and as directed.

Supply And Fix SS 304 grade Toughened glass door lock with strike box suitable for 12mm thick glass having base material aluminium alloy and cover made of SS304 grade including fixing to the glass doors etc., complete all as specified and as directed.

Material and Labour for SS grade 304 top pivot to hold the toughened glass panels in position in doors/partitions including securing glass with necessary screws, silicone gasket to tighten it etc, complete all as specified and as directed.

Material and Labour for preparing new plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives at 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied at 0.90 litre/ 10 sqm over new / prepared surfaces complete all as specified and directed. Note - Primer and emulsion to be carried out through air less spray machine.

Please Enable Macros to View BoQ information