RequiredExperience with Government
RequiredCertificate (Requested in ATC) Bid to RA enabled No Water Tender Type A Or Fire Or Rescue Trucks ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Water Tender Type A fire brigade use complete with Cabin and Chassis To carry a water tank· of 2700 to 3600 litres capacity depending upon the type of chassis used. It shall carry an extension ladder and shall be capable of towing a trailer pump. * Requirement regarding Generally In * 1/9 material
Requireddesign and construction
Requiredworkmanship and finish
Requiredaccessories and equipment of water tender
Requiredtype A for fire brigade use compliance to IS : 948 latest and with Builtup Cabin and Chassis Water Tank capacity of Water Tender (water tank capacity depending upon the type of chassis used) 3600 3600.0 Cabin and Chassis Make of Chassis - * Chassis Model No - * Type of Fuel Diesel * Vehicle Emission Compliance BS-IV * Engine Power BHP@rpm 2400 * Engine Torque Max
Required@ rpm 1400 * Fuel Tank Capacity 225 * Length of Chassis 5920 * Width of Chassis 2440 * Height of Chassis 2990 * Gradeability of Chassis( %) 23 * Ground Clearance 250 * Wheel Base 4225 * Gross vehicle mass including crew
Requiredwater and equipment 16000 16000.0 Chassis Transmission System Manual * No of Speed/Forward Gears 5 * Type of Steering Power * Turning Circle Diameter 10 * ABS Fitted Yes * Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Constructional Details of Fire Tender Overall width 2.5 * 2/9 Seating Capacity in the driver's cabin cum crew compartment 6 * Doors provided on each side of driver's cabin with hinged opening outward
Requiredhung forward with catch locks and flush type handles 2 * Construction of Cab and Lockers all metal construction with sufficient rigidity and reinforcement and shall be kept as light as possible in mass. Pressed sections of sufficient strength shall be used for the super structure * Lockers to secure stowage of all equipments Yes
RequiredThe height of the lockers from the bottom to the top of the opening shall be not less than 600 mm * Internal automatic lighting arrangement with the meter switch in the cab for lockers Yes * Locker Doors The doors of the. Lockers shall have sufficient means for holding them closed by efficient flush fitting spring loaded lockers. The doors of the side lockers shall not be hinged at the bottom. * Ladder Gallows with locking arrengments for ladder when stowed Yes * Length of aluminium extension ladder 10.5 * Tool-Kit Container A specially fitted recessed tray for the normal kit of tools
Requiredcarried on the appliance shall be provided * Water Tank Material Mild Steel * Thickness of Side Sheet 4 * Thickness of Bottom Sheet 5 * 3/9 Thickness of Baffel Plates 4 * Relavent surface treatment/paint details for inner surface ensuring the potability of water as per IS Yes * Size of square Channel for body of main structure 32 mm x 1.6 mm * Base Frame Structure Mild Steel * Exterior and Interior Panel thickness of aluminium sheet for side body and roof 1.6 * Thickness of Flooring Made from Aluminium Chequered sheet 2 * Glasses:- Front wind screen
Requiredrear glass in two pieces (toughened type glass as per CMVR Window with lock cum handle Yes * Top portion of fixed glass window & bottom portion in two halves in sliding pattern Yes * Standard automobile paint to the exterior body as per CMVR for Fire Tender Yes * Front Bumper Hook Yes * Rear Hook Yes * Water Tank Febrication Water Tank Body Mounting - * Nos of Baffels 3 baffels for above 2700 ltr capacity * Water Tank Fitments The tank shall befitted with a 75 mm bore overflow pipe . A 63 mm instantaneous hydrant connection
Requiredincorporating a strainer
Requiredshall be provided for filling the tank through 50 mm bore pipe work. An 100 mm bore pipeline shall be taken from/the tank * 4/9 for the suction inlet of the pump incorporating an 100 mm quick spherical type valve. Anti Corrosive Treatment adequate anti-corrosive treatment from inside after fabrication . Inside surface shall be prepared by sand blasting before painting. Epoxy treatment should be given inside the water tank for corrosion resistance. Epoxy treatment shall consist of one coat of primer with 2 coats of finish. The tank with its fitments shall withstand hydrostatic pressure of 0.3 bar. * Water level indicator for the tank visual level gauge of glass tube shall be provided at the control panel calibrated 1/4
Required1/2
Required3/4 and full preferably calibrated in litres also * Covered mainhole Diameter (minimum) 450 * Diameter of cleaning hole at bottom of Tank(minimum) 250 * Equipments and Accessories Water Pump Set 275 LPM Portable Pump Set to IS:942 latest * Pump RPM Pressure Throttle Control Panel Manual Throttle Manual Throttle Instruction Books Instruction book( s) for the guidance of the user( s) including both operating and normal maintenance procedure shall be supplied. The book(s) shall include an itemized and illustrated spare-parts list giving reference numbers of all the wearing parts * Hand operated Fire Bell- 250 mm diameter mounted externally Yes * 5/9 and capable of being operated from within the driver compartment Head Lamps 2 * Fog Lamps 2 * Reversing Lights a lamp suitably situated to assist reversing. * Multicolour Red- White-Blue LED light Bar situated on the head of the driving compartment as per CMVR Yes Yes Warning Lights NA NA Trafficators - Illuminated with indicating light on instrument panel or in any other prominent position in driving compartment Yes * Willd Screen Wippers Yes * All tools required for normal routine maintenance of the appliance which are not included in the kit for the chassis Yes * Siren Battery operated Yes * Search Light adjustable to given flood or beam light
Requiredmounted in a convenient position but capable of being readily disconnected and mounted on a tripod away from the appliance
Requiredcomplete with tripod and with not less than 30 m of TRS cable on a reel mounted on the appliance * Spot Light - adjustable
Requiredmounted in a convenient position on the rear side of the driving compartment Yes * Inspection Lamp - Yes * 6/9 protected type on wander lead with plug
Requireda socket shall be provided in the control panel in the driver's cab for plugging in the lamp Tail Lamps - two of combined stop and tail Yes * Rear Reflectors Yes * Side View Mirror Yes * Low Fuel Warning Light Yes * Standard Spare wheel and Tool Kit Yes * Public Address System - battery operated system with mike in the driver's cab and speaker on the top bf the vehicle Yes * Performance Capability of fire tender of being started from rest and move upon a gradient of 1 to 4 Yes * Performance of Brakes as per CMVR Yes * Stability of complete Fire Tender The stability of the appliance shall be such that when under fully equipped and loaded condition ( but excluding crew)
Requiredif the surface on whicel the appliance stand is tilted to either side
Requiredthe point at which over-turning occurs is not passed at an angle of 27 degrees from the horizontal. * Certification Manufacturer's name or trade-mark on Fire Tender Yes * Marking for Capacity of the water tank in Litres on fire Tender Yes * Marking for Year of Manufacture on Water Tender Yes * Warranty Time 1 12.0 Warranty Distance 10000 10000.0 7/9 Battery Warranty 12 12.0 Numbers of Free Service 2 2 Transportation Charge in Rupees Per Km 35 * Complete Fire Tender including Chassis
RequiredPTO and Body approval from ARAI/VRDE/ICAT Yes Yes Chassis Certification including form 22 A from ARAI/VRDE ICAT Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
