Repair/Maint to Plumbing, sanitary fittings, chajja, floors, tilling, plastering and other connected works in domestic area at Air Force Station Jaisalmer

Amount

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed

Reinforced cement concrete (Nominal Mix) 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in chajjas and the like and complete all as specified. Note:- Reinforcement & formwork shall be measured and paid for separately.

Formwork to flat surfaces of chajjas, chullah hoods, troughs and similar items including edges for rough finished surfaces complete all as specified.

Mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

8mm dia rebar using HY-200 chemical from HILITI or equivalent including drilling hole of required size in RCC beam/lintel beam complete all as specified and as directed.

Rendering 15mm thick in cement and sand mortar (1:6) on stone masonry or concrete surfaces and finished even and smooth (without using extra cement) including taking down cement plaster complete all as specified and directed.

Rendering 15mm thick in cement and sand mortar (1:4) on stone masonry or concrete surfaces and finished even and smooth (without using extra cement) including taking down cement plaster complete all as specified and directed.

Rendering 10mm thick in cement and sand mortar (1:3) on fair faces of concrete surfaces in ceiling and finished even and smooth without using extra cement including taking down cement plaster complete all as specified and directed.

Preparation newly plastered surfaces or unplastered surfase of walls and applying two coats of distemper oil emulsion and including a coat of chalk whitening complete all as specified and directed.

Preparation newly plastered surfaces or unplastered surfase of ceiling and applying two coats of distemper oil emulsion and including a coat of chalk whitening complete all as specified and directed.

Preparation of newly plastered or unplastered of wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer of any colour complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) as in ground floors, copings and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) as in above ground floors, copings and pavings not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

75mm thick Plain Cement Concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection and flooring and provided joints 10mm wide & full depth at 3m distance and every change of direction filled with sand and bituminious mix 1:3 complete all as specified and directed.

25mm thick Plain Cement Concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in levelling coarse in flooring, finished even and rough complete all as specified and directed.

100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring and foot path complete all as specified and directed.

40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

Glass dividing strips, 38mm wide and 3mm thick, inserted in position, conform to design complete all as specified and directed.

Factory made chequered cement concrete tiles, 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, over and including 15mm thick screed bed in cement and sand mortar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm laid in floor etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm ( 400mm x 400mm or as per approved by GE) but not exceeding 0.18 Sqm laid in floor etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

Coloured glazed ceramic tiles in dado/skirting 450x350x7mm or 350x250x7mm thick on vertical surfaces, dado and skirting over and including 10mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

Vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement and sand mortar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified

Vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved) on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

10mm thick, size 300x300mm coloured endura parking tiles over and including 15mm thick screed bed in cement and sand mortar 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed

Application of epoxy resin bonding agent with sikadur 32LP @ 0.5 Ltr/Sqm over old concrete surface complete all as specified and directed. Make: SIKA/BASF/FOSROC

Taking down and refixing in the same opening after resecuring or easing & adjusting of shutters of any description area exceeding 1.00 Sqm each and not exceeding 2.00 sqm each complete all as specified and directed.

500 Litre capacity Rotational moulded polyethylene water storage tanks white colour three layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. fixed including taking down existing water storage tank complete all as specified and directed.

1000 Litre capacity Rotational moulded polyethylene water storage tanks white colour three layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc fixed including taking down existing water storage tank complete all as specified and directed.

Galvanized steel water tubing medium grade of 15mm bore with & including all fittings and complete to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 15mm bore, complete all as specified and directed.

Galvanized steel water tubing medium grade of 20mm bore with & including all fittings and complete to walls and ceiling or laid in floors, including taking up or down old unserviceable steel water tubing and connections of 20mm bore, complete all as specified and directed.

Taking up or down steel water tubing and connecting including cleaning and including refixing for 15mm bore old steel water tubing and connection in new or old position including all new fittings and fixtures (wall, ceiling, floor etc) complete all as specified and directed.

Taking up or down steel water tubing and connecting including cleaning and including refixing for 20mm bore old steel water tubing and connection in new or old position including all new fittings and fixtures (wall, ceiling, floor etc) complete all as specified and directed.

Cutting chases, pinning in, making good to facings as original where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth in stone concrete blocks or slabs complete all as specified and directed.

15mm bore fancy type chromium plated long body Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair complete all as specified and directed.

15mm bore fancy type chromium plated pillar taps with capstan heads, screwed down high pressure with long screwed sharks and fly nuts screwed down for iron pipes etc and fixed as in repair complete all as specified and directed.

Brass chromium plated basin mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore and fixed as in repair complete all as specified and as directed.

15mm bore fancy type chromium plated stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed as in repair complete all as specified and directed.

15mm bore stop valve fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed.

15mm bore two way angle cock fancy type cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed.

20mm bore Gun-metal globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron pipe and fixed and including taking down old unserviceable valve complete all as specified and directed.

Ball valves, high pressure of PTMT (Polytetra methylene terephthalate) with epoxy coated aluminum rod & high density plastic ball and fly nut, screwed for iron pipe 15mm dia (minimum weight 142 gms) fixed as in repair complete all as specified and as directed.

Ball valves, high pressure of PTMT (Polytetra methylene terephthalate) with epoxy coated aluminum rod & high density plastic ball and fly nut, screwed for iron pipe 20mm dia (minimum weight 210 gms) fixed as in repair complete all as specified and as directed.

Bib taps standered fency type of PTMT (Polytetra methylene terephthalate) with high pressure, screwed for iron pipe or for brass ferrule of 15mm dia (minimum weight 15mm-90gms) fixed as in repair complete all as specified and as directed.

15mm bore chromium plated shower rose with or without CP arms swivel joint, 75mm dia, including fixing to steel pipe or union and fixed as in repair complete all as specified and directed.

Vitreous china wash down water closet pan (Pedestal pattern), white coloured, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic water closet seat cover (white coloured) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as in repair complete all as specified and directed.

Plastic water closet seat cover (white coloured) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device fixed as in repair complete all as specified and directed.

Vitreous china squatting pan 'Orissa Pattern' of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete including jointing and making good to floor provision of PCC 1:5:10 bed as in repairs and including dismantling and taking down old unserviceable complete all as specified and directed.

PVC capacity 10 Litres valve less syphonic action type, flushing cistern low level, white coloured, with inlet, ball valve, float and handle including brackets complete with flush pipe fixed as in repair complete all as specified and directed.

Vitreous china wash hand basin white colour flat back of size 550x400mm including cutting for and pinning in ends of or erecting stand including waste fitting, brass chromium plated 32mm size with longh with including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10x7.5x15cm with Including dismantling and taking down old unserviceable complete all as specified and directed.

PVC connection suitable for 15mm bore with PTMT nuts of 600mm length and including taking down old unserviceable complete all as specified and directed.

Grating doom 100mm dia of PTMT (Polytetra methylene terephthalate) (Minimum weight 25gms) fixed as in repair complete all as specified and directed.

PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement for trap fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls in repair complete all as specified.

75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as in repair complete all as specified.

Cutting holes into or through brick/stone masonry wall built in cement mortar and making good in cement mortar 1:3 or PCC 1:2:4 type B0 (using 12.5mm aggregate stone aggregate) as required for superficial area exceeding 400 sqcm but not exceeding 0.16 sqm complete all as specified and directed

110mm bore PVC (SWR) bend any radius provided with access door fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) bend any radius provided with access door fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) bend any radius provided fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) Junction Single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed.

75mm bore PVC (SWR) Junction single (Single T) equal or unequal provided with access door fixed as in repair complete all as specified and directed.

Tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges fixed as in repair complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed as in repair complete all as specified and directed.

Sink made of stainless steel 1mm thick for Kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe over all size 510mm x 430mm, bowl size 430mm x 380mm with all fitting and fixure fixed as in repair complete all as specified and directed.

Sink with draina board made of stainless steel 1mm thick for Kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410mm x 330mm with all fitting and fixure fixed as in repair complete all as specified and directed.

Stainless steel kitchen plate rack 1.00mm thick of size not less than 900x750mm for fixed with stainless steel screw on wall properly as in repair complete all as specified & directed

32/40mm bore PVC flexible downtake waste pipe fixed to WHB, urinal or sink fixed as in repair complete all as specified.

Waste coupling of PTMT (half or full threaded) (minimum weight 60gms) suitable for stainless steel sink 40mm bore pipe fixed as in repair complete all as specified and directed.

Chromium plated Hand Shower including flexible pipe 1.0 to 1.50 metre long with walll hook and anodised hanging device fixed as in repair complete all as specified and directed.

Chromium plated health faucet 15mm dia screwed down high pressure 1.5mtr tube and hook for pedestal pattern for water closed fixed as in repair complete all as specified and directed.

Chromium plated Jet spray brass including flexible pipe 1.0 to 1.50m length fixed as in repair complete all as specified and directed.

Taking down carefully copper/aluminium point wiring without any damage (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling rose, pendants, regulators, sockets, light fitting, switch board etc removing material to store for reuse at site refixing the same material and making good disturbed area complete all as specified and directed.

M/S TANUSHREE CONSTRUCTION COMPANY

M/s Ramesh & Company

M/S PIYUSH CONSTRUCTION COMPANY

M/s Shree Construction Company

Leelashah Enterprises