Construction of Children Park and open Gym at Nagri Parole Kathua (Phase-II)

Amount

Supplying and laying including digging, carrying by lorry, filling River Bed Material including watering & consolidation in layers to specified lines, camber, grades and cross sections. Finished work including material , labour all leads , lifts and carriage of material by MT/HL.

Supplying and filing of good earth at site including watering, rolling, royalty and carriages by MT/HL .

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all leads, lifts & carriage of material by MT / H.L.

Providing and laying dry stone agg. using 40mm nominal size incl. spreading, levelling,sand grouting, watering, ramming, etc all complete including all leads, lifts & carriage of material by MT / H.L.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50 mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including all leads, lifts & carriage of material by MT / H.L.

Centring and shuttering including strutting propping etc and removal of form work for foundations, footings, bases of columns etc. for mass concrete.

12 mm cement plaster of mix 1 : 4 ( 1 cement :4 fine sand) including all leads, lifts and carriage of material by M.T / H.L.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer. Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Supplying and fixing of Leg Press shall consist of 80 NB G.I. pipes with two suitably designed brackets attached on it. Brackets have to be made of M.S. material with G.I. plating. The moving frame of Leg Press is to be made of 40NB G.I. pipes which is to be mounted to the main frame with the help of suitably designed, machined shaft and bearing housing. Bearings used are to be of oil sealed, self-lubricating. Make of bearing shall be as per approved make list. Foot rest is to be hinged to the main frame with the help of suitably designed G.I. plated clamp & 25 NB G.I. pipes. Gusset plates have to be provided to give extra strength to foot rest. Foot rest is too made of high quality HDPE material. Suitably designed HDPE pads has to be provided at the bottom of moving frame. Seat and back rest provided has to be made of HDPE. All pipes are to be uniformly powder coated up to minimum 60 micron thickness to avoid corrosion. All open ends of pipe is to be close by GI / HDPE caps for user safety against entrapment. FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be min. of 6 inches. Work has to be completed as per direction of the engineer in-charge & specified notes

Supplying and fixing outoor abs shaper Material Mild Steel, GI Customisation Customised Condition New Dimension 2150 X 450 X 800 mm Is It Portable Non Portable usage/Application Outdoor use only Model Number RE027 Max User Weight 110 KG FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supplying and fixing of See Saw should be conforming to EN 1176-6:2008 for safety requirements for free height of fall. 2. Ergonomically designed Rotational Molded seat should be 300milimeterx 190 milimeterx 70 milimeter. 3. See Saw Lever should be made from 80NB Galvanized Pipe conforming standards IS 1239 with strong load carrying capacity. 4. See Saw stand should be with special Nylon-6 bush enclosed in a seamless pipe hinged to 50NB Support pipe. The stand is fixed with ISA for strong foundation grip. 5. The roto products should be manufactured using material LLDPE (Linear Low Density Polyethylene) of Grade -36RA045 (Food Grade Plastic) with density 963 kg/m3 . The material is added with antioxidant & 12% UV for protecting the product from color fading. The material is tested with weatherability test, carbon test, M.F.I. (Melt Flow Index) test, fatigue test. The mold is fixed to three arm bi-axial rotational molding machine & kept in the oven for about 20 minutes up to temperature of 180-210 Degrees. The overall product obtain is a seam- -less to ensure perfect blend of uniform thickness & durability. FOUNDATION AND INSTALLATION: the equipment is required to be fixed in open ground which may include excavation of earth and suitable concrete foundation to bear the load of the equipments with the children. Besides adjoining area has to be filled with sand to prevent the children from getting hurt. The filling of the sand should be minimum of 6 inches. Work has to be completed as per direction of the engineer in-charge and specified notes

Supply and fixing outdoor Ladder fibre spiral slide play unit with fibre and mild steel material branded Slide type Straight and platform height 8 ft.

Supplying anf fixing tripple twister specifications main pipe dia = 127 mm Thickness-3 mm base plate dia-200 mm thickness-10 mm Powder Coating size 1775 x 1775 1475 mm

Providing and fixing inauguration stone (granite of size 3/x 2/-0//) incl. engraving , painting, writing & const. of pedestal of 5 feet height by way of brick work , plastering, tiling & painting incl. all leads , lifts & carriage of material by M.T./H.L.

M/S DEEPAK KUMAR GUPTA

M/S NARESH KUMAR