Loading
Loading…
Loading…
Tender Value
₹5.7 Cr
EMD Value
₹11.5 L
Closing Date
29 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
CIVIL
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfilment of technical eligibility criteria for different components. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt , Organization, work experience certificate issued by public listed company having average annual turnover of Rs500 crores and above in last 3 financial years excluding the current financial year, listed on national stock exchange or Bombay stock exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the public listed company to issue certificates. In case tenderer submit work experience certificate issued by public company, the tenderer shall also submit along with work experience certificate, the relevant company of work order, the bill of quantities, bill wise details of payment received duly certified by charted accountant, TDS certificate for all payment received and a copy of final /last bill paid by company in support of above work experience certificate. Substantially completed work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of price variation clause(PVC), if any (has been made to the contractor in that ongoing contract and no proceedings of termination of contract on contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60days of date of invitation of present tender. (for details refer GCC)
Defination of Similar Work :- Any Civil Engineering Works (excluding Track works/Zonal works).
46 conditions · 7 needing a document upload
Copies of the following documents are to be uploaded: (i) Details such as Name of the tenderer/ Contractor, Validity of DSC, Complete address with pin code, Contact Number (ii) Copy of PAN Card (iii) Copy of GSTIN card
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family( HUF) / Limited Liability Partnership (LLP)etc. The tenderer(s) shall enclose the attested copies of the requisite documents(including Power of Attorney, if opted) for constitution of their concern as per clause 14 of GCC Part I and as per a) Clause 17 of GCC Part I, for JV b) Clause 18 of GCC Part I, for Partnership firm
I/We also hereby agree to abide by the Indian Railways Standard General Conditions Of Contract, with all correction slips up-to- date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions/Specifications, Schedule of Rates with all correction slips up to date for the present contract
I/We have read the various conditions to tender attached hereto and agree to abide by the said conditions
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking
I/We have read the various conditions attached/ referred to in this tender document, and agree to abide by the said conditions.
I/WE also hereby agree to abide by the INDIAN RAILWAY GENERAL CONDITIONS OF CONTRACT- APRIL 2022, with all correction slips up to date and to carry out the works accordingly.
Deployment Of Qualified Engineers At Work Sites By The Contractor. The contractor shall also employ Qualified Graduate Engineer or Qualified Diploma Holder Engineer, based on value of contract, as may be prescribed by the Ministry of Railways through separate instructions from time to time.(As per RB ltr no.2012/CE-I/CT/O/20 dt:10.05.2013)
One qualified Graduate Engineer when the cost of the work is Rs. 500 lakhs and above.
One qualified Diploma holder Engineer when the cost of the work to be executed is more than Rs.50 lakhs but less than Rs.500 lakhs.
In case the contractor fails to employ the technical staff as aforesaid, he shall be liable to pay a an amount of Rs.50,000/ (Rupees Fifty thousand) for each month or part thereof for the default incase of Graduate Engineer and Rs.35,000/- (Rupees Thirty five thousand) for each month or part thereof for the default in case of Diploma holder (Engineer)
I/WE also hereby agree to abide by the INDIAN RAILWAY GENERAL CONDITIONS OF CONTRACT- April 2022, with all correction slips up to date and to carry out the works accordingly.
Until a formal agreement is prepared and executed, acceptance of this tender shall constitute a binding contract between us subject to modifications, as may be mutually agreed to between us and indicated in the letter of acceptance of my/our offer for this work.
I/We offer to do the work for CPM/GS/II/SC, at the rates quoted in the attached schedule and hereby bind myself/ourselves to complete the work in all respects within the period of completion stipulated in the tender document, from the date of issue of letter of acceptance of the tender. The Bid security shall stand forfeited without prejudice to any other right or remedies in case my/our Tender is accepted and if : (a) I/We do not execute the contract documents as stipulated in performance guarantee clause of GCC as detailed in general instructions. (b) I/We do not commence the work within seven days after receipt of orders to that effect.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking
I/We have read the various conditions attached/ referred to in this tender document, and agree to abide by the said conditions.
A tenderer claiming credentials as an individual for their share in a partnership firm, has to submit both the deeds of (i) partnership deed, showing % of their share and (ii) retirement deed from the partnership firm(or) deed showing the closure of business operations of the partnership firm, as applicable. Failing to submit the above deeds, the offer of the tenderer will be summarily rejected.
Bid Security: (refer clause 5 of Part - I of IRSGCC- April 2022 along with correction slips).The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India .The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The General Conditions of Contract governing the performance of the works covered by this tender are the IRS GCC-2022 [including upto ACS no.6. A soft copy of the Indian Railway Standard General conditions of Contract is uploaded in the attached documents to the tender for reference. Hard copy of IRSGCC (with up-to-date correction slip) may be perused in the office of the Chief Administrative Officer/ Construction/ South Central Railway / Secunderabad - 500071. The tenderer/s is/are deemed to have kept himself/themselves fully Informed of the provisions of the IRS General conditions of Contract including all corrections and Amendments issued up to date (as on date,IRS GCC-2022 upto ACS no.6 shall be considered) while submission of offer and any claim that he/they is/are not aware of any amendment or correction slip to the IRSGCC shall not be entertained.
The prospective tenderers are advised to follow the IRSGCC with amendments from time to time together with conditions, Special Conditions and specifications which are annexed to the tender document and attached to the tender. The documents attached to the tender document should be clear and legible for evaluation of tenders. Illegible copies will not be considered for evaluation.
The successful bidder shall have to submit Performance Guarantee (PG), within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22ndday after the date of issue of LOA. Further, if the 60thday happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day.If the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated
All the instructions furnished in the Technical compliance/Commercial Compliance/Check-list/Undertakings are only indicative and not exhaustive. The Tenderer shall read The GCC/Tender Document for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
If the Tenderer(s) deliberately give(s) wrong information/incorrect documents in his/their offer or create circumstances for the acceptance of his/their offer, the Railway reserves the right to reject such offer at any stage.
All terms and conditions in the tender documents are binding on the Tenderers.
Railway reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning any reason.
Unreleased Bid Security, if any, held with the Railway Administration, Shall not be adjusted towards the Bid Security to be remitted.
Hyderebad Division-1) Provision of additional COPs for a length o f 32m on PF-1 and 48m on PF-2 at MED station 2) Provision of additional COPs at MXT,YKA & UR 3) Raising of Platforms at MXT 4)Raising of Platforms at YKA 5) Raising of Platforms at HPG.
03-GS-SC-II-26-OT
03-GS-SC-II-26-OT
Open
Works - General
9 Months
Hyderabad, Telangana
₹0
₹11.5 L
29 May 2026
5 May 2026
15 May 2026
82 items across 4 schedules · ₹5,73,61,681.93 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Beyond 10 km upto 20 km per km | cum- km | 26707 | 15.08 | 4,02,741.56 |
| 2 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. | cum | 4095.23 | 494.1 | 20,23,453.14 |
| 3 | All kinds of soil | Sqm | 4368 | 129.85 | 5,67,184.8 |
| 4 | All kinds of soil | cum | 52 | 177.5 | 9,230 |
| 5 | All kinds of soil. | cum | 1692 | 260.3 | 4,40,427.6 |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. | cum | 67 | 196 | 13,132 |
| 7 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 40 | 700.5 | 28,020 |
| 8 | All kinds of soil | cum | 68 | 126.8 | 8,622.4 |
| 9 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | cum | 4 | 2,123.75 | 8,495 |
| 10 | All kinds of soil | Sqm | 100 | 34.15 | 3,415 |
| 11 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 19 | 7,294.7 | 1,38,599.3 |
| 12 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 671.11 | 7,178.75 | 48,17,730.91 |
| 13 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources) | cum | 13 | 10,105.1 | 1,31,366.3 |
| 14 | 1:1 1/2:3 (1 Cement: 1 1/2 coarse sand (zone- III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 8 | 8,726.85 | 69,814.8 |
| 15 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 71 | 9,045.75 | 6,42,248.25 |
| 16 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 88 | 8,583.4 | 7,55,339.2 |
| 17 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 1439.77 | 392.15 | 5,64,605.81 |
| 18 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 50 | 736.4 | 36,820 |
| 19 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 22 | 961.3 | 21,148.6 |
| 20 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 8 | 10,585.9 | 84,687.2 |
| 21 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 225 | 7,132.25 | 16,04,756.25 |
| 22 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 1329 | 1,123.8 | 14,93,530.2 |
| 23 | Cement mortar 1:6 (1 cement : 6 Coarse sand) | cum | 127 | 8,752.55 | 11,11,573.85 |
| 24 | Cement mortar 1 : 4 (1 cement : 4 coarse sand) | Sqm | 74 | 1,105.8 | 81,829.2 |
| 25 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 21 | 7,311.25 | 1,53,536.25 |
| 26 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 118 | 8,198.55 | 9,67,428.9 |
| 27 | Masonry work (second sort), in cement mortar 1:6 (1 cement: 6 coarse sand) | cum | 38 | 10,128.1 | 3,84,867.8 |
| 28 | Area of slab upto 0.50 sqm | Sqm | 418 | 5,413.5 | 22,62,843 |
| 29 | Area of slab over 0.50 sqm | Sqm | 28 | 5,136.3 | 1,43,816.4 |
| 30 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 2594 | 772.4 | 20,03,605.6 |
| 31 | Light shade pigment using white cement | Sqm | 195 | 1,402 | 2,73,390 |
| 32 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 850 | 3,186.7 | 27,08,695 |
| 33 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 621.05 | 4,481.3 | 27,83,111.37 |
| 34 | 110 mm diameter | Metre | 1702 | 377.4 | 6,42,334.8 |
| 35 | 75 mm bend | Each | 48 | 105.9 | 5,083.2 |
| 36 | 110 mm bend | Each | 24 | 150.35 | 3,608.4 |
| 37 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 1562 | 738.65 | 11,53,771.3 |
| 38 | Crimp curve | Sqm | 48 | 496.75 | 23,844 |
| 39 | 1:6 (1 cement: 6 fine sand) | Sqm | 1193 | 383 | 4,56,919 |
| 40 | Flush/ Ruled pointing | Sqm | 52 | 385.4 | 20,040.8 |
| 41 | Two or more coats on new work | Sqm | 196 | 155.9 | 30,556.4 |
| 42 | Two or more coats on new work | Sqm | 1935 | 146.8 | 2,84,058 |
| 43 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 609 | 2,434.25 | 14,82,458.25 |
| 44 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 13 | 3,551.25 | 46,166.25 |
| 45 | In cement mortar | cum | 96 | 2,060.2 | 1,97,779.2 |
| 46 | In cement mortar | cum | 18 | 2,458.95 | 44,261.1 |
| 47 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | Kg | 4834 | 5.65 | 27,312.1 |
| 48 | For thickness of tiles 10 mm to 25 mm | Sqm | 1978 | 73.4 | 1,45,185.2 |
| 49 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 52 | 266.45 | 13,855.4 |
| 50 | G.S. Sheet | Sqm | 100 | 164.95 | 16,495 |
| 51 | Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer | cum | 13 | 11,098.45 | 1,44,279.85 |
| 52 | Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre- moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) | per cm depth per cm width per metre length | 75000 | 5.3 | 3,97,500 |
| 53 | Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in- Charge. | per cm depth per cm width per metre length | 7170 | 8.65 | 62,020.5 |
| 54 | Providing and laying C.C. pavement of mix M- 25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). | cum | 866.64 | 9,823.8 | 85,13,698.03 |
| 55 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | Sqm | 404 | 2,017.6 | 8,15,110.4 |
| 56 | Providing and placing in position 100 mm thick factory made machine batched and machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100 mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc including cost of cartage, all leads and lift, handling at site etc. all complete as per direction of Engineer-in-Charge. | Sqm | 26 | 3,081.95 | 80,130.7 |
| 57 | 32 mm nominal dia Pipes | Metre | 52 | 518.75 | 26,975 |
| 58 | 20 mm nominal dia Pipes | Metre | 232 | 537.6 | 1,24,723.2 |
| 59 | 32 mm nominal dia Pipes | Metre | 180 | 739.3 | 1,33,074 |
| 60 | 65 mm nominal dia Pipes | Metre | 687 | 1,674.4 | 11,50,312.8 |
| 61 | 150 mm nominal dia Pipes | Metre | 161 | 6,822.7 | 10,98,454.7 |
| 62 | 50 mm dia nominal bore | Metre | 52 | 762.15 | 39,631.8 |
| 63 | 50 mm nominal bore | Each | 8 | 1,026.65 | 8,213.2 |
| 64 | 15 mm nominal bore | Each | 167 | 798.95 | 1,33,424.65 |
| 65 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. | Each | 430 | 1,399.95 | 6,01,978.5 |
| Schedule total | ₹4,46,63,321.42 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
systemimprovement-Sitelab.pdf
ATTACHMENT
paymentforsteel2022.pdf
ATTACHMENT
LrtoallconcernedregSpecialconditiononConcreteMixDesign.pdf
ATTACHMENT
content in
ATTACHMENT
DLCdt24.9.2020.pdf
ATTACHMENT
LaboratorySplconditions5526.pdf
ATTACHMENT
ContractorseMBrecord5526.pdf
ATTACHMENT
SpecialConditions-Civilworks.pdf
ATTACHMENT
RevisedBrandsapprovedlist20255525.pdf
ATTACHMENT
TenderDocument.pdf
ATTACHMENT
GCC2022uptoACS7.pdf
ATTACHMENT
ACS9GCC.pdf
ATTACHMENT
ACS10GCC.pdf
ATTACHMENT
ACS11GCC.pdf
ATTACHMENT
DESIGNMIXSystemimprovementguidelinesforbringingeconomyinconcretedesignmix-Reg.1_1.pdf
ATTACHMENT
Listoflatestapprovedbrands26.02.2026.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .