Balance work of Home guards Building in District- Mathura (U.P)

Excavation in foundations in ordinary soil (Loam clay or sand) including lift upto 1.5 m. and lead upto 30m. (100 fts.) & including filling. watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in- charges upto a distance of 30 m.(100 fts.) from the foundation trenches.

Providing and laying Cement concrete 1:4:8 (1 cement: 4coarse sand: 8 graded stone ballast 40 mm nominal size) including supply of all materials.labour and T&P etc. required for proper completion of the work and curing complete. also including cost of formwork in foundation & Under flooring .

First Class brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, and T & P etc.required for proper completion of the work.

15 mm cement plaster on plinth side of single or half brick wall of mix: 1:4 (1) cement: 4 coarse sand .

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate .

Providing and placing computer table with one side racks made with both side laminated particle board size 1200mm X750 mm x 750mm complete as per direction of engineer -in-charge.. (Make- Godrej or equivalent).

Supplying and placing in position of 360 degree revolving high back officer chair. the back rest of the chair shall be made by keeping the comfort complete as per direction of engineer -in-charge.. (Make- Godrej or equivalent).

Providing and placing Main Officer table with extended return unit size 1800mm x 900mm d x750mm H with top made of 36mm thick partical Board, The working edge shall be provided with machine pressed 2mm thick pvc edging using special hot melt glue at hot temperature. The table should have a provision of side storage of size 1200mm L X450mm D X675 mm complete as per direction of engineer -in-charge.. (Make- Godrej or equivalent).

Providing & placing in position of table of overall size 2500mmx1600mm x750mm with one side Rack 3 nos with bottom frame are made of steel and Top are made from partical board 25mm thick complete as per direction of engineer -in-charge.. (Make-Godrej or equivalent).

Providing & placing in position of table of overall size 1200 mmx600mm x750mm with bottom frame are made of steel and Top are made from partical board 25mm thick complete as per direction of engineer -in-charge.. (Make-Godrej or equivalent).