PERIODICAL SERVICES, PETTY REPAIR, REPAIR/ REPLACEMENT OF JOINERY ITEMS, FLOORING, WALLS, PLUMBING SYSTEM, SANITARY ITEMS AND OTHER LEAKAGE SEEPAGE WORKS FOR OTM ACCN DGIS, WARDEC, IML UNDER AGE B/R-I OF GE (SOUTH) DELHI CANTT-10

Amount

Attending complaint for petty repair to leaking water in bib tap, pillar tap, stop cock, angle valve, flushing cistern, WHB, Sink, wall mixer etc. of any description any size by changing the washers(s)/jumper(s) etc, by adjusting/replacing the washer(s) and adjustment of lever required for making the flushing cistern functional, by tighting the leaking waste pipe of WHB/Sink and providing 'M' seal to stop leakage as required. Removal of air lock/blockage of water in GI water tubing and cleaning the pipe or fittings etc. including replacement of major defective item if required, complete all as specified and directed. Notes :- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis.Any major item required to be replaced with new one, to make the system functional shall be measured and paid for seprately as " S & F" under respective applicable item of this schedule. Old retrived item (s) as considered in 'Schedule of Credit' shall become property of the contractor. 2. Contractor shall provide minimum one plumber for DGIS, WARDEC and IML including all necessary T & P on all working days from 9AM to 5 PM .Additional workers can be engaged if nature of work required to be completed with in fixed time as desired by GE . Rate shall be quoted accordingly . Keeping in mind above said provisions. 3. Where material provided shall be paid as " S&F underrespective item of Sch. 'A' the payment of complaint under this item shall not be paid. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained by Engineer-in-charge.

S&F in repair brass jumper washer, brass head, face and spindle for bib cock/pillar cock/stop cock 15 mm bore any type complete all as specified and as directed.

S&F in repair 15mm bore chromium plated bib tap long body with flange cast copper alloy with crutch or butterfly handle, screwed for iron pipe, complete all as specified and as directed.

S & F in repair 15 mm bore Chromium plated Pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure screwed in iron pipe complete all as specified and as directed.

S & F in repair 15 mm bore chromium plated Stop valve/angle valves cast copper alloy, screwed down both, high pressure, with crutch or butterfly handle, screwed both end fixed, complete all as specified and as directed.

S & F in repair chromium plated brass overhead shower with arm 195 mm with flange with swivel joints, any size, including fixing to steel pipe or union for 15mm bore pipe complete all as specified and as directed.

S & F in repair towel rail brass chromium plated 60 cm long,20mm dia, complete all as specified and as directed.

S & F in repair 15 mm dia bib tap standard of PTMT any colour for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and as directed.

S & F in repair small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and as directed. Note: This item will not be measured against item No.19 here in after.

S & F in repair small fittings galvanised iron 'medium grade' such as socket, elbow, nipple of any length upto 150mm long, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and as directed. Note: This item will not be measured against item No.20 here in after.

S & F in repair PVC connection 15 mm dia 45 cm long with 2 Nos PVC check nuts with washer complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F in repair 32 mm to 40mm dia PVC waste pipe for WHB & sink, 60 cm long with union complete all as specified and as directed.

S & F in repair CP grating 127 mm dia with/without hole round, fixed on floor / nahani trap, fixed with cement mortar(1:3) complete all as specified and as directed.

S & F in repair PVC syphone with handle complete for low level flushing cistern complete all as specified and as directed.

S & F in repair PVC long bend for low level flushing cistern complete all as specified and as directed.

S & F in repair 10 ltrs capacity PVC Low level flushing cistern including PVC syphon and float valve with float, PVC long bend for out let connection of cistern with WC complete fixing and connecting bend with WC complete all as specified and as directed.

S & F in repair PVC float valve for cistern tank complete all as specified and as directed.

S&F galvanised steel water tubing 15 mm bore 'medium grade' with and including all fittings and fixed to walls or laid in floors including taking down of old GI tubing complete all as specified and as directed.

S&F galvanised steel water tubing 20mm bore 'medium grade' with and including all fittings and fixed to walls or laid in floors including taking down of old GI tubing complete all as specified and as directed.

S&F in repair for vitreous china wash hand basin flat back size 550x400 mm size white excluding taps waste chain and plug and porcelain stopper but including brackets and 32 mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm X 600 mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair vitreous china squatting pan (Orissa pattern white) long pan fixed size 580x440mm white with integral footrest with 100 mm bore Cast iron `P' or `S' trap complete (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repair Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified

S&F Vitreous china urinal partition white of size 310x700 mm complet all as specified and as directed.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Disconnecting existing tanks of capacity 500 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting at other place as directed and reconnecting , repair if required and re-fixing in position complete all as specified and as directed.

Disconnecting existing tanks of 1000 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting at other place as directed and reconnecting , repair if required and re-fixing in position complete all as specified and as directed.

Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding 250 litres but not exceeding 500 Litres capacity of tanks complete all as specified and as directed.

Cleaning and removing all scales and dirt etc from existing tanks and from mouths of circulating pipes etc for exceeding 500 litres but n.exc 1000 Litres capacity of tanks complete all as specified and as directed.

S&F rotational moulded polyethelene water storage tank 4 layer capacity 500 litres cylindrical vertical with closed top hoisted and fixed in position including dismantling water tanks not exceeding 500 litre and removal from sitecomplete all as specified and as directed.

S&F rotational moulded polyethelene water storage tank 4 layer capacity 1000 litres cylindrical vertical with closed top hoisted and fixed in position including dismantling water tanks not exceeding 1000 litre and removal from sitecomplete all as specified and as directed.

S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and as directed.

S & F in repair HDPE PVC lid (cover) for 300 to 1000 Ltrs capacity PVC tank complete all as specified and as directed.

S&F in repairs 100 mm bore cast iron sand soil waste or vent pipes, in any length with or without ears with joints in cement mortar (1:3), laid in trenches, floors or fixed to walls all as directed including making good to match with existing surfaces including taking down cast iron pipes including fittings by burning out lead joints etc to facilitate dismantling old serviceable fittings/pipes laid in trenches, floors or fixed to walls omplete all as specified and as directed.

All as per srl item No 34.00 here-in-before but 75 mm bore.

S&F in repair, 100 mm bore cast iron branch piece (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

All as per srl item No 36.00 here-in-before but 75 mm bore.

S&F in repair, 100 mm bore cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

All as per srl item No 38.00 here-in-before but 75 mm bore.

S & F in repair CI floor trap with grating including jointing to waste pipe in run lead, dia of outlet 75 mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified and as directed.

S & F in repair CI floor trap with grating including jointing to waste pipe in run lead, dia of outlet 100 mm including floor around to required depth and burning lead joints etc to facilitate dismantling old CI trap and making good complete all as specified and as directed.

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval including taking down of eaves gutter rain water pipe (any size of pattern) including all fittings, heads, shoes, bends, swan-necks and cleaning or fixing or removal , complete all as specified and as directed.

S&F PVC (SWR) bends/Tees of radius, suitable for 110 mm dia PVC pipes fixed complete all as specified and as directed.

Attending complaint for petty repair to easing of Doors/Window/Cup Board shutters by tightening of hinges / handles / Al-drop bolt / tower bolt / knobs, hasp and stapple etc of any size / any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts,sliding bolts, replacement of looking mirror etc complete including replacement of major defective item if required, complete all as specified and directed. Notes :- 1. The contractor shall make all arrangement for attending the different types of complaints on every day basis. Any major item required to be replaced with new one, to make the system functional shall be measured and paid for seprately as " S & F" under respective applicable item of this schedule. Old retrived item (s) as considered in 'Schedule of Credit' shall become property of the contractor. 2. Contractor shall provide minimum one Carpenter for DGIS, WARDEC and IML including all necessary T & P on all working days from 9AM to 5 PM .Additional workers can be engaged if nature of work required to be completed with in fixed time as desired by GE. Rate shall be quoted accordingly . Keeping in mind above said provisions. 3. Where material provided shall be paid as " S&F underrespective item of Sch. 'A' the payment of complaint under this item shall not be paid. 4. Proper records (date wise) of complaints received & rectified by the contractor and attendance register of trademen shall be maintained by Engineer-in-Charge.

M&L for welding in repairs n.exc 2.5 cm in length of any thickness of metal in any situation and in any position such as hinges and similar articles etc for steel door, gates, window, ventilatiors and grills etc for upto four stoery building complete all as specified and as directed.

S&F in repairs 200mm mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

S&F in repairs 100mm size of butt hinges, medium weight cold rolled mild steel complete for door etc, with welding to steel chowkhats, at any floor up to four storied bldgs and making it functional, complete all as specified and as directed.

S&F in repairs steel window handles (right & left) and peg stays etc as per sample complete all as specified and as directed.

S&F in repair 125 mm aluminium anodised handle cast type, complete all as specified and as directed.

S&F in repair 150 mm aluminium anodised handle cast type, complete all as specified and as directed.

S&F in repairs MS Morties lock mild steel 4 levers vertical type size 100mm fixed in floor complete all as specified and as directed.

S&F in repairs for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S&F in repairs aluminium (die cast body) Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 Sqm in each pane including hacking out old broken glass complete all as specified and as directed.

M&L for easing of aluminium doors by adjusting floor / hydraulic door closer including jointing of cleats and hinges for smooth functioning including necessary taking down and refixing in the same opeing with entire satisfaction of Engr-in-Charge complete all as specified and as directed.

S&F in repairs rubber bead for fixing of aluminium doors glass complete all as specified and as directed.

S&F in repair powder coated aluminium frame for partitions,doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F in repair aluminum powder coated door shutter, aluminium section weighing not less then 0.55 Kg/m incl necessary jointing cleats, glazing clips rubber neoprene packing incl (a) 150mm handle - 02 Nos (b) Stainless steel hinges - 100mm - 03 Nos (c) Mortice lock in built 3 lever-01 Nos in each shutter, alum anodized snap beading screw etc complete all as specified and as directed. Note: Glass & particle board shall be paid measured and separately.

S & F 4.8 mm thick tinted glass fixed to aluminum frame work with rubber beading gasket complete all as specified and directed.

S&F 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed to aluminum framing all as specified and directed.

S&F 12 mm toughened glass coloured match with existing glass including all necessary fittings up to 4th story bldg. all as specified and as directed.

M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1: 6 including dismantling old tiling including cement mortar bedding (but not backing) of any description and thickness and removal of rubbish off the premises complete all as specified and as directed.

M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1: 6 including dismantling old tiling including cement mortar bedding (but not backing) of any description and thickness and removal of rubbish off the premises complete all as specified and as directed.

M & L for coloured glazed ceramic tiles of size 200mm x 300mm x 6 mm thick, on vertical surfaces such as dados etc, set and jointed in neat cement slurry and pointed in white cement over and incl 10 mm thick rendering in cement mortar 1:4 including dismantling old tiling including cement mortar bedding (but not backing) of any description and thickness and removal of rubbish off the premises complete all as specified and as directed.

M&L for Vitrified glazed Ceramic tiles (light shade), 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6, including dismantlling of existing tiles complete all as specified and directed.

M& L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of graniteand including 15 mm thick screed bed in cement mortar 1: 6 including dismantling old tiling including cement mortar bedding (but not backing) of any description and thickness and removal of rubbish off the premises complete all as specified and as directed.

M& L for glazed coloured ceramic tiles in vertical surface of size 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white cement over and incl 10 mm thick rendering in cement mortar 1:4 including dismantling old tiling including cement mortar bedding (but not backing) of any description and thickness and removal of rubbish off the premises complete all as specified and as directed.

S&F machine cut kota stone slab flooring 20-25 mm thick laid over 20 mm thick cement screed base 1: 6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing including dismantling old tiling including cement mortar bedding (but not backing) of any description and thickness and removal of rubbish off the premises complete all as specified and as directed.

M&L cleaning of / removal of forgeion material from roofs (complete roof for one block), like tree leafs, small busses, grass, trees shrubs, small plants girth not exceeding 30 cm, etc and clean grating jallies at mouth of rain water pipe ,and made functional all the rain water pipes, including removing of all debries from roof by collecting in gunny begs and thrown away at a distance not exceeding 1 km meter from site complete with entire satisfactin of Engr-in-Charge.

Deemolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick Cement concrete 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection, finished fair and even without using extra cement, complete all as specified and as directed.

M&L for 100 mm th PCC 1:2:4 type B-2 (40 mm graded crushed stone aggregates) as in finishing cement concrete surface even and smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar including quoins, arches, pillers etc. complete all as specified and as directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified and as directed.

Taking down shutters of any description area exceeding 1 Sqm & not exceeding 2 Sqm each and refixing in the same opening complete all as specified and as directed.

Taking down shutters of any description area exceeding 1 Sqm & not exceeding 2 Sqm each complete all as specified and as directed.

Taking down door chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 sqm each complete all as specified and as directed.

M&L for Pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc complete of frame size 105mmx60mm including PCC for filling of hollow portion and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer, complete all as specified.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side as gap insert for top rails bottom rail, panelling of plain colour PVC sheet to be fitting in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drg complete all as specified and as directed.

S&F 35 mm thick, 2nd class hardwood, glazed and Skelton shutters, open rebated and prepared to receive glass / gauze etc ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M & L for preparation of new wooden surfaces of any description over 10 cm in width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S&F 100 mm butt hinges of stainless steel medium weight complete all as specified and as directed.

S&F 200 mm long SS barrel tower bolt of extruded section complete all as specified and as directed.

S&F 125 mm SS handle cast type, complete all as specified and as directed.

S&F 150mm long SS barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing for ISI marked 250 mm long SS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring of 140 mm size with vulcanised rubber piece complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to aluminium window frame / wooden doors or steel section windows complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to aluminium window frame / wooden doors or steel section windows complete all as specified and as directed.

Distmantling of ceiling boards (fibre, pulp, insulation etc.) or insulation bords/ slab/blankets, any thicness, including cover fillets complete all as specified and as directed.

S&F anodised aluminium snap grid frame (with minimum 15 micron uniform anodic coating) size of 605mm x 605mm consisting of Tee/Angle section, size 40 x 40 x 2mm as approved make confirming to IS-733 in frame of false ceiling including aluminium cleat with necessary CP brass/stainless steel shunk screws. Aluminium perimeter angles fixed to wall/wooden frame at centre to centre and fixing frames to level adjusting anchors 8mm dia GI wire with hook in Tee members at 1.5m centre to centre fixed to steel trussed roof including 4mm thick non asbestos (E board) fibre cement building boards fixed or laid/inserted to aluminium frame work with screw in ceiling complete all as specified and as directed.

M&L for Dholpur stone 25-30mm thick cladding gangsaw cut machine cut edges, uniform colour of each stone size exc 0.25 sqm area and not exc0.50 sqm area (Stone size as per site) fixed with and including one number SS clamps (grade 202) of flat 30mm x 2mm ,150 mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for fastner, polishing, rubbing & including silicon treatment and grouting with CM 1:3 (SS Fastners 75-100 mm long, complete all as specified and as directed. Note : Necessary scaffolding rates included in the above item.

M&L for drilling hole in the existing dholpur stone 20-25 mm thick (flush fastner fixed in the centre of each stone) for fastner, polishing, rubbing & including silicon treatment and grouting with CM 1:3 on existing stone on wall and match with existing colour (SS Fastners 75-100mm long) complete all as specified and as directed. Note:- The height of building up to 4th storey building, necessary scaffolding rates included in the items.

S & F in repair Vitreous China wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, fixing with screws of suitable size, plastic seat cover, white closed pattern with flat bottom and cover, complete all as specified, making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, complete all as specified.

S&F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium anodised hinging device complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M & L for rendering 10 mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1: 6 and top layer 5mm thick in cement mortar 1: 4 mixing water proofing compound on faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed.

Supply only water proofing compound, complete all as specified and as directed.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces of ceiling, chajja, etc finished fair and even complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying average 1 mm thick water proof cement base wall care putty to achieve even and smooth surface and then applying two or more coat 100% anti fungal acrylic emulsion exterior grade weather proof paint over and including one coat of exterior primer with fully automatic airless spray machine of paint application having an electric motor of min 8 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 Hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as specified and as directed. Note : Primer should be compatible with the paint and cleaning of window panes post completion of paints work.

M&L for complete removal of existing treatment under (OBD/Oil paint/ white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than 1500, sending pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour complete all as specified and as directed.

M&L for cement based putty of average thickness 1-2 mm over the plastered/Old painted wall /ceiling surcafes to make the surface free from dust etc, by skilled labor as per following steps :- Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with wall mixture with the mixing capacity of minimum 2.5 kg putty per minute Step 2 :- Applying the first coat of prepared mixture with the help of fully automatic airless spray machine of putty application having flow speed of maximum 6 liters per minute with a maximum pressure of 3300 PSI. Step 3 :- Allow 6-8 Hrs time to dry the putty surface.

M&L for applying two coats of oil bound distemper on wall/ceiling surfaces over and including one coat of primer using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 m the spray machine should be of reputed manufacturer with Pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed.

M&L for preparation of old surfaces by manual/mechanical grinding applying one coat of oil bound distemper on wall and ceiling using airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 m the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note-Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part of sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete all as specified and as directed. Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

Demolition of RCC of any description, in any position roofs, floors (other than ground floors), beams staircases, landing, chajjas, RCC overhead tank and similar suspended work and Removing excavated material /demolition material exc. 1.50 km but n exc.5 km including taking down from upto four storey complete all as specified and as directed.

M&L for form work to chullah hoods, chajjas, parapets, troughs and similar items including edges for rough finished surfaces of concrete, complete all as specified & directed.

M&L for RCC (1:1.5:3) type B-1 using 20 mm graded crushed stone aggregate as in chajjas complete all as specified and as directed.

M&L for TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500/550, complete all as specified& directed.

M&L for TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500/550, complete all as specified& directed.

Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of mud in roof, any thickness, including plastering and leeping incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or as directed complete all as specified and as directed.

Removing soil excavated material exc. 1.5 Km but not exc 5km and depositing where directed at above the starting point complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) on roof padding surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for screed bed 10 mm thick (average) plaster on concrete surfaces in CM (1:3) on roof, mixed with water proofing compound and finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note. Water proofing compound shall be measured and paid seperately.

M&L for APP based polymeric water proofing membrane minimum weighing not less than 3.5 Kg/sqm and 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) membrane shall be laid by torch application side over lap of 100 mm and end lap of 150 mm shall be provided and joints /overlap shall be sealed with torch application as per manufacturer's instructions by authorised applicator over and including a coat of bitumen primer conforming to IS 3384 over plastered surface @ 0.4 Kg/sqm by the same membrane manufactured, complete all as specified and as directed. Note:-The water proofing treatment shall be carried out by manufacturer or their authorised applicator as per manufactures instruction and as directed by Engr in Charge.

M&L for preparation of new surface of APP membrane and applying two coats of aluminium paint at surfaces of any description, over 10cm in width or girth, not otherwise described, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specially provided for, complete all as specified and as directed.

M & L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered and hold fast on edge including necessary form work, complete all as specified and as directed.

S&F PVC wall panelling plastic section for wall panelling of 5 mm thick fixed with 5 mm thick PVC sheet fillets of width 35 mm for wall paneling and fixed to wall to make PVC frame as per specification and drawing including dismantling of old boarding, complete all as specified and directed.

S & F in repair Single Piece EWC (European Water Closet) of size 710 × 390 × 790 mm, Cruiser model, Snow White colour, made of vitreous china, with matching seat cover, twin flush system, and strap, including all fittings such as flexible connection pipe, rubber gaskets, nuts, bolts, washers, and making necessary connections to CI/UPVC soil and vent pipes, cutting and making good the floor/walls wherever required, complete all as specified and directed by Engineer-in-Charge.

S& F in repair table top Wash Basin of size 650 × 380 × 110 mm, Catmax make, Snow White colour, vitreous china of approved quality and shade, including CP brass waste coupling (32 mm, full thread, with ceramic pop-up), CP brass bottle trap (32 mm), necessary chromium plated fittings, making all connections with waste/soil pipe, cutting and making good the surfaces wherever required, complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP Brass Waste Coupling with Ceramic Pop-up, full threaded type, 32 mm size, heavy duty, suitable for wash hand basin, including rubber washers, gaskets, necessary fittings and making leak-proof connections, complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP Brass Bottle Trap of size 32 mm, heavy duty, with suitable wall flange, rubber gaskets and all necessary fittings, fixed to wash hand basin outlet and connected to waste pipe, complete all as specified and directed by Engineer-in-Charge.

S&F angle cock fancy type cast copper alloy, screwed down, high pressure, with crutch orbutterfly handle, screwed both ends for iron pipe or fo runions and fixed to 15mm bore pipe complete all as specified and directed.

S&F Pillar Cock Mixer, 2-in-1 type, long body, single handle, suitable for counter top wash basin, of approved make and design, including all CP brass fittings, rubber gaskets, PTMT connection pipe and making leak-proof connections with water supply lines of 15mm bore , complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP brass Bib Cock with wall flange and single knob, of approved make and design and making leak-proof connections with water supply lines of 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP Wall Mixer, 3-in-1 type, with wall flange, suitable for hot and cold water arrangement, of approved make and design and making leak-proof connections with water supply lines of 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP Brass 2-Way Bib Cock with wall flange and single knob, of approved make and design and making leak-proof connections with water supply lines of 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F in repair shower panel of size 1400 × 200 mm, anti-fingerprint stainless steel finish, complete with overhead shower, body jets, hand shower with flexible hose, diverter and all necessary CP brass fittings, with provision for hot and cold water inlet connections, including wall mounting arrangements, gaskets, washers and making leak-proof connections with water supply lines of 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP Health Faucet with ABS body (push type), complete with wall hook and 1.0 metre long stainless steel braided rubber hose pipe, including necessary CP brass fittings, washers, gaskets and making leak-proof connections with water supply line of 15mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F Corner glass shelf 300x300 mm with 'D' / F type brackets complete all as specified and directed.

S & F brass CP Soap dish complete all as specified and directed.

S & F brass CP Liquid Soap dispenser complete all as specified and directed.

S & F Stainless steel (AISI-304) toilet paper holder complete all as specified and directed.

S&F Stainless steel (AISI-304) Towel rack 600 mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F Stainless steel (AISI-304) Towel rail 450 mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats. complete all as specified and as directed.

S&F 12mm toughened glass with frosted sun film partition in bathing area with door sliding/openable as rqd with all necessary fittings i.e. handle, clits for smooth functioning, locking arrangement and top/sides are fixed as required with wall complete all as specified and directed.

H S KALSI AND BROS (BID ID -3460802)