Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹3.6 L
Closing Date
31 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SOUTH
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N OR 'V' Whichever is less; where. V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per ANNEXURE-XXXIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Trenching,Cable laying,Location and /or signal foundation/erection/termination/wiring in connection with any signalling work
8 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender document, Scope of work & GCC 2022 are attached with the tender.
Signalling work in connection with CSMT - Kalyan - Improvement of Track Alignment by Track Slewing and OHE modification in Mumbai Division.
CR-BB-SNT-SOUTH-2026-81
CR-BB-SNT-SOUTH-2026-81
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹3.6 L
31 Jul 2026
2 Jul 2026
17 Jul 2026
23 items across 1 schedule · ₹1,52,70,650.89 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of copper lugs 25 Sq.mm double hole for AFTC track lead (Rail side) as per Drg.No. R- ST 11788 make Braco.Dowells,Shakti, Ascon. (Sample to be approved before bulk supply). (Inspection Agency- Consignee) | Numbers | 500.00 | 47.11 | 23,555.29 |
| 2 | Supply of 25 Sq.mm copper lugs ( single hole) with 6 mm dia- MAKE : dowels or Similar. AS PER DRG NO : RST-11790.(Inspection Agency- Consignee) | Numbers | 500.00 | 12.98 | 6,490 |
| 3 | Digital current clamp meter to measure current leaks parasitic draws down to 1 mA and electric load from 1 mA to 100 Amp AC/DC, and voltages from 0 to 600 V AC/DC, small jaw size to measure current in signaling circuits, 4 digit display. make FLUKE/ GTC/KIOCO or superior with better specification mentioned with all accessories like test lead, batteries and carrying case, sample may got approved from consignee before supply. (Inspection Agency- Consignee) | Numbers | 20.00 | 25,581.6 | 5,11,632 |
| 4 | "Execution of S & T work related to Signalling/enginnering maintainance/block activities, in one job five unskilled manpower have to be provided for S&T work as per Railway site engineer instruction.(Inspection Agency- Consignee)" | Job | 800.00 | 3,971.52 | 31,77,216 |
| 5 | Casting of cement concrete to protect S&T equipments and laid cables, above pipes etc by concrete mixture of cement, sand, stone in theratio of 1:2:4 using 25 mmgraded stone aggregate asper instruction of site incharge of railways. Concreteis to be casted with the helpof suitable size shutteringform as per site requirement.Concrete is to be cured for sufficient time as per standard practices on railways(Inspection Agency- Consignee) | cum | 5.00 | 4,228.44 | 21,142.2 |
| 6 | Repairing of location foundation with masonarywork. This also includescleaning the locations, sandfilling in the location andplastering inside the location(Inspection Agency- Consignee) | Numbers | 50.00 | 2,647.02 | 1,32,351 |
| 7 | 40V Cordless driver drill with 2 Batteries (40V 2.5 AH) Maker MAKITA, FEIN or HILTI etc. or similar as per Technical specifications attached in ANNEXURE-I(Inspection Agency- RDSO) | Numbers | 6.00 | 69,384 | 4,16,304 |
| 8 | Suitable Dual port charger as per Cordless drill driver Make MAKITA, FEIN or HILTI .(Inspection Agency- Consignee) | Numbers | 6.00 | 22,936.37 | 1,37,618.22 |
| 9 | Wheel sensor with protection tube of Frauscher make MSDAC type Rsr 180 (with BBIK- M 12 GS05 fixing along with cable length of 5 mtr (GS05)(Inspection Agency- RDSO) | Numbers | 15.00 | 1,65,364.02 | 24,80,460.3 |
| 10 | Wheel sensor with protection tube of Frauscher make MSDAC type Rsr 180 (with BBIK-M 12 GS05 fixing along with cable length of 15 mtr (GS05)(Inspection Agency- RDSO) | Numbers | 8.00 | 1,92,617.51 | 15,40,940.05 |
| 11 | Wheel sensor with protectiontube of Frauscher makeMSDAC type Rsr 180 (withBBIK- M 12 GS05 fixing alongwith cable length of 10 mtr. (Inspection Agency- RDSO) | Numbers | 5.00 | 1,87,140.19 | 9,35,700.95 |
| 12 | "VENUS ADJUSTABLE SPANNER 15"" /375MM PHOSPHATE FINNISH (Venus) Cast Iron conforming to Grade BM 310 of IS :2108-1977 (for light duty wrenches) preferably Drop Forged, Maximum opening of adjustable jaw (min 36 mm to 41 mm) + Tolerance(3 mm) make Taparia, VENUS, JK.(INDER Normal duty Type A Phosphate Coating Adjustable single ended open jaw wrench .(Inspection Agency- Consignee)" | Numbers | 10.00 | 761.28 | 7,612.8 |
| 13 | Solid Carbide Coated Drill Dia7.1mm For Track DrillingDimensions are Dia7.1X30X61 Shank - 9mm .(Inspection Agency- Consignee) | Numbers | 340.00 | 1,878.45 | 6,38,673 |
| 14 | CAD white Paper 2 Inch Core Roll to suit the XL 3600 36-inch plotter (Inspection Agency- Consignee) (UNIT NUMBER SHOULD BE READ AS ROLL)(Inspection Agency- Consignee) | Numbers | 200.00 | 649 | 1,29,800 |
| 15 | Supply of DWC/HDPE pipe with one snap fit coupler 'O' ring confirming to IS 14930 (Part 2: 2001) Non metallic, normal duty, pliable with protection against chemical attack and fire resistant, anti rodent, in 6 meter length of size 50 mm inner dia.(Inspection Agency- Consignee) | Metre | 300.00 | 389.76 | 1,16,928 |
| 16 | Battery operated High performance LED area with 3000 lumens output light weight & unbreakable as per specification attached (1) Product specification M18 HAL -+ M18 NRG 502B (2) Article No. 493345123 (3) Battery compatibility all Milwaukee M18 Batteries (4) Battery capacity (Ah) 5.0 (5) Battery type Li ion (6) No of Battery charger supplied 01 No. (7) Full Battey charging time 59 min (8) Max light output 3000/1500/650 (9) Max run time battery 2/4/9 hr. (10) No. of batteries supplied 2 Nos. (11) Voltage (AC) (V) 220-240 (12) Voltage (DC) (V) 18 (13 Wight with battery pack (kg) 3 (14) One year onsite warranty, installation & training free of cost mak Eibenstock/Milwaukee or equivalent.(Inspection Agency- Consignee) | Numbers | 2.00 | 60,279.74 | 1,20,559.48 |
| 17 | "Self-Fusing Rubber Electrical Insulating and Sealing tape consist of an ethylene propylenerubber (EPR) Backing coated with an aggressive, temperature-stable mastic adhesive. The tape is 50 MMWidth X 10 Feet length X 1.65 MM Thick for Quick Application Build ?Up. It is designed for electricalinsulating and moisture sealing applications. It can be used on copper or Aluminium Conductors rated at90 Degree Celsius, with an emergency overload rating of 130 Degree Celsius. It offers excellentresistance to moisture and ultraviolet exposure and is intended for both indoor and weather exposedoutdoor applications.MAKE : 3M,NITTO DENCO,ACHEM or similar.(SAMPLE TO GET APPROVED BEFOREBULK SUPPLY) (Test Certificate of the Product related to this specification is to be provided with the offerelse the offer shall not be considered) (Inspection Agency- Consignee)" | Numbers | 500.00 | 1,652 | 8,26,000 |
| 18 | Z219 Silicoseal (SILIRUB 2)of McCoy soudal of 310 ml marketted by stanvac Chemical or or similar . Product must be approved by consignee before supply(Inspection Agency- Consignee) | Numbers | 1200.00 | 402.33 | 4,82,796 |
| 19 | Supply of counting head ZP 43 V complete with 15m sensor for Siemens make MSDAC(Inspection Agency- Consignee) | Numbers | 3.00 | 3,59,836.58 | 10,79,509.73 |
| 20 | ACM200 module with ID Plug for Siemens make MSDAC. ACM200 module with ID plug without IM for Siemens make MSDAC(Inspection Agency- Consignee) | Numbers | 3.00 | 3,03,608.1 | 9,10,824.3 |
| 21 | SIRIUS CARD for Multi Section Digital Axle Counter Siemens make RDSO specification No.RDSO/SPN/176/2013 Ver.3 or latest Make/Brand: SIEMENS(Inspection Agency- RDSO) | Numbers | 4.00 | 1,74,336.53 | 6,97,346.13 |
| 22 | "Portable Automatic Relay Testing kit,Automatic test set up with auto record/print facility for measurement of important parameters of Metal to Carbon Relays, Model Name : UNI-REL Q, version-1.0(Inspection Agency- Consignee)" | Numbers | 1.00 | 5,31,000 | 5,31,000 |
| 23 | Motherboard for MSDAC part no. 3CRo1838AAAA make Eldyne(Inspection Agency- Consignee) | Numbers | 7.00 | 49,455.92 | 3,46,191.44 |
| Schedule total | ₹1,52,70,650.89 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
FINALNEWTENDERDOC2026-81.pdf
ATTACHMENT
GCC_April-2022_1.pdf
ATTACHMENT
CORRECTIONSLIP1to11GCC2022_compressed_1.pdf GCC CORRECTION SLIP 1 TO 11
ATTACHMENT
CORRECTIONSLIP1to11GCC2022_compressed_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .