PROVISION OF CERTAIN MAJOR REVENUE AND MINOR WORKS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Taking down chowkats or frames not exc. 1.5 Sq mtr each with shutters without taking off shutters from the frames complete all as specified and as directed by the Engineer-in-Charge

All as per ser Item as above but exc 1.5 Sqm and not exc 4 sqm each complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S & F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pan complete all as specified and directed

Providing and fixing powder coated aluminium(minimum thickness of powder coating 50 micron) work for doors,windows,ventilators and partitions(fixed portions)with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285 fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions,i.e. at top,bottom and sides with required EPDM rubber/neoprene gasket etc.Alunimium sections shall be smooth,rust free,straight,mitred and jointed mechanically whereever required including cleat angle,Aluminium snap beading for glazing/paneling,CP brass/stainless steel screws,all as specified and directed

M&L for 12mm thick prelaminated particle board,interior grade,prelaminated both sides with decorative choice laminations fixed with any sections complete all as specified and directed.

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cup borad & kitchen cabinet shutters including lipping with teek wood and all other similar works complete all as specified and directed.

S&F continuous (piano) hinges,40mm width flaps,mild steel,bright finish or electrogalvanised complete all as specified.