Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.2 LAccepted-AOC 5 6 MINTO ROAD ALLAHABAD 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹26.8 L+₹2.6 L (10.9%)Rejected-Finance | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹27.2 L+₹3.0 L (12.4%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹27.3 L+₹3.2 L (13.1%)Rejected-Finance | L4 | Rejected-Finance Not Reasonable | |
| 5 | L5₹27.4 L+₹3.2 L (13.4%)Rejected-Finance | L5 | Rejected-Finance Not Reasonable |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
6 Jun 2023, 6:00 pmClosed
Sh Saurabh Gupta, EE
GE(W) Colaba, Mumbai
REPAIRS /REPLACEMENT OF FLOOR AND WALL TILES AND PLASTER WORK IN OTM AND MD ACCN AT AREA I AND V AT AGE B/R (W) UNDER GE (W) COLABA, MUMBAI
2023_MES_593965_1
8745/E8
Open Tender
Civil Works
Item Rate
180 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(W) Colaba, Mumbai
₹80,000
Yes
5 Aug 2023
9 May 2023
8 Jun 2023
9 May 2023
6 Jun 2023
23 May 2023
Amount
Carefully chipping, removing existing internal plaster upto 12 to 15 mm thick by low impact high frequency hammer/chipper without damaging the original sound brickwork or concrete including removal of POP/ Gypsum plaster if any on walls of any thickness, racking of joints, daily cleaning and stacking of debris at prescribed location in polypropylene/paper bags, disposing off the debris so generated on weekly basis out side the premises all as specified and directed.
Carefully chipping, removing existing external plaster upto 25 mm thick by low impact high frequency hammer/chipper without damaging the original sound brickwork or concrete including racking out joints, daily cleaning and stacking of debris, removing all as specified and directed.
M&L for old loose spalled concrete should be chiseled from roof ceiling with the help of scrapers chisele & hammer after that cleaning of rust from mild steel rod and applying cement slurry spray 3.00 kg per sqm by paint brush over cleaned surface for 8-10mm thick ready mix plaster in ceiling or on brick wall or concrete surfaces including making groove of appropriate size and finished even & smooth without using extra cement including applying two coats of OBD over one coat of interior all as specified and directed.
M&L for filling cracks by cutting 'V' groove cracks of internal or external plaster of walls, ceilings/Chajjas all along the crack upto 10 mm and remove the loose plaster/concrete by suitable tools, filling cracks with crack paste compound and apply the second coat after 10-12 hrs of application of first coat and for external application must be coated with paint including necessary scafolding of any hieght of bldg all as specifed and direcetd. Make : Use of Dr Fixit Crack 'X' shrinkfree paste compound/ Smartcare Texture Crack Filler / Build Core Compound / Fosroc Compound, as approved by GE
M&L for cleaning all loose laitance on the wall and concrete substrate and applying one coat of epoxy bonding agent of SBR latex on exposed concrete surface to ensure bond between old concrete & new concrete by brush application including scafolding at any height as specified and directed. Make: Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd or Nerolac perma SBR latex
M&L for plastering 20 mm thick average Polymer modified mortar (ready mix pack) in two coats 15 mm base coat and 5 mm finishing coat with and including curing as per manufacturer's instructions all as specified and directed. Make : Dr. Fixit Repair Pro Polymer Mortar, Fosroc RENDEROC S2 structural grade polymer mortar, ShaliFix FRM Polymer Modified Fiber Reinforced Mortar of STP or equivalent as approved by GE
M&L for 12 mm thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surfaces) and finished surfaces even & smooth without using extra cement all as specified and directed. Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.
M&L for 20-25 mm average thickness Ready Mix plaster in multi layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately as supply only.
M&L for preparing newly plastered surfaces of walls/ceilings by scrapping/rubbing and applying two coats of Anti-fungal, Dust resistant, Water repellant, Crack-bridging, weather proof type (Ist quality), Exterior Acrylic Emulsion paint (100% Acrylic) Base coat of Apex ultima of Asian Paints, protek duralife and top coat of Apex Ultima protek, over a coat of "Trucare" exterior wall primer, through authorized applicator only all as specified and directed. Make: Asian Paints / Berger Paints ( Weather coat All Guard) / Nerolac (Excel Top Guard) / Dulux Paints ( Dulux Weather shield Max), sample as approved by GE.
M&L for preparation of newly plastered wall surfaces and applying a coat wall care putty (Birla White Wall care or equivalent) 2mm thick ( in two coat 1 mm each ) average on plastered surfaces including rubbing with sand paper, preparatory to distempering and applying two coats of acryilic emulsuion over a coat of alkali resistant priming paint all as specified and directed. Make : Apcolite Premium Emulsion
M&L for preparing of old surfaces of walls by and applying two coat of weather proof acrylic exterior paint (100% Acrylic Asian Apex Ultima Protek Duralife or equivalent) over a coat of primer (Ultima Protek Duralife Basecoat) or equivalent) and scaffolding where ever required at any height for external painting all as specifed and directed or equivalent
M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil, greasy spots and apply two coats of distemper oil emulsion on walls by an authorised applicator Make: (a) Paint : Asian paint Tractor Uno Acrylic Distemper or Berger Bison or equivalant in Nerolac/ J & N
M&L for providing & applying anti algalwater-based Elastomeric exterior wall finish on old as well as newly plastered surface including surface preparation, applying suitable wall primer and application of two coats of paint by brush etc. complete all as specified and directed. Make Dr Fixit Rain coat classic,Asianpaints, Berger, Truworth, Apurva or equivalent Note : Height of Bldg Up to fourth floor.
M&L in repairs coloured double charged polished glazed vitrified tiles 10 mm thick (Square/rectangular) polished, area of each tile exc 0.36 sqm but not exc 0.72 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles including dismantling complete all as specified and directed. Make : H R Johnson/ Nitco / Kajaria.
M&L in repairs coloured double charged digital glazed vitrified tiles 10 mm thick (Square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exc 0.72 sqm in vertical surfaces such as skirting & dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles including dismantling complete all as specified and directed. Make : H R Johnson/ Nitco / Kajaria.
M&L in repairs coloured polished digital vitrified tiles 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles including dismantling all as specified and directed. Make : H R Johnson/ Nitco / Kajaria.
M&L in repairs coloured polished glazed vitrified tiles 10 mm thick (Square/rectangular) polished, area of each tile not exc 0.36 sqm in vertical surfaces such as skirting & dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling all as specified and directed. Make : H R Johnson/ Nitco / Kajaria.
S&F golden/any colour pencil tilles of size 8-10 mm medium size, glossy finish, fixing in dado spacing all as specified & directed
M&L in repairs coloured, digital glossy/matt finish outdoor elevation ceramic tiles, in vertical surfaces 600x300x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles including 10 mm thick rendering in CM 1:4 & including dismantling all as specified and directed. Make - Varmora(GL-1001 to 1032 of any type) /Johnson/ Kajaria or equivalent)
M&L in repairs coloured Digital cremic tiles 10 mm thick (Square/rectangular) polished area of each tile not exc 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling all as specified and directed. Make : Kajaria/Varmora/Orient bell/Johanson
M&L in repairs coloured Digital cremic tiles 10 mm thick (Square/rectangular), polished area of each tile not exc 0.36 sqm in vertical surfaces such as skirting & dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles including dismantling all as specified and directed. Make : Kajaria/Varmora/Orient bell/Johanson
M&L in repairs Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular), area of each tile exc 0.06 sqm but not exc 0.11sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles including dismantling all as specified and directed. Make : Kajaria/Varmora/Orient bell/Johnson
M&L screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes like tiles all as specified and directed.
M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.
M&Lin repairs glazed tiles digital coloured ceramic tiles 300x450x7mm /300x600x7mm thick in vertical surfaces such as skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles including dismantling all as specified and directed. Make : Kajaria/Varmora/Orient bell/Johanson Note:- Rate of designer border (Highlighter) tiles are included in the quoted reate of this item.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados, etc. laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.
M&L for machine cut, polished, cudappah stone work 20 to 25 mm thick (table rubbed and polished) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over 15mm thick cement mortar (1:4) all as specified and directed.
M&L for granite stone slab (of any approved colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding, polishing including moulding edges as in kitchen platform, counter for WHB, flooring and all other similar works all as specified and directed.
S&F in repairs 20 mm thick, machine cut, Kota stone slab of uniform shade, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, grit polishing followed by wax etc. with and including 20mm thick screed bed in CM 1:4 all as specified and directed.
All as per item above item No 29 but as in skirting/ riser/ dado etc with and including 10 mm thick backing coat in CM 1:3 all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore all as specified and directed
Taking up or down steel tubing and connection including cleaning for refixing or removal to store, 20 mm dia bore all as specified and directed
Taking up or down steel tubing and connection including cleaning for refixing or removal to store, 40 mm dia bore all as specified and directed
Refixing of old 15 mm bore steel tubing with fixtures and fittings and including cleaning in positon (walls, ceiling and floor etc complete) all as specified and directed
Refixing old 20 mm bore steel tubing with fixtures and fitting including cleaning in positon (walls, ceiling and floor etc complete) all as specified and directed
S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik
S&F GI tubing 20 mm bore medium grade with all fittings and fixtures and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik
S&F GI tubing 40mm bore medium grade with all fittings and fixtures and fixed complete to wall and ceiling or laid in floors all as specified and directed. Make: Jindal / Tata / Swastik
Cutting chases, pinning in and making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n, exc. 10cm girth all as specified and directed.
S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe (excluding flushing cistern) including seat cover for pedstal panall as specified and directed. Make : Cat Part No S1050102 of Cera or Equivalent in Hindware / Parryware.
S&F in repairs two piece vitreous China wash down water closet pan (pedestal pattern) white, including trap, connection to drain and flushing pipe, including flushing cistern, including soft close seat cover for pedstal pan all as specified and directed. Make : Cat Part No S1021105 of Cera or Equivalent in Hindware / Parryware.
S&F in repairs vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete all as specified and directed. Make : Cat Part No S2040139 of Cera or Equivalent in Hindware / Parryware.
S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe all as specified and directed. Make : Cat Part No B1010106 of Cera or Equivalent in Hindware / Parryware.
S&F in repairs counter Top wash basin oval shape 550x460mm fixed with waste coupling & waste pipe & accessories complete all as specified and directed. Make : Cat Part No 10095 of Hindware or equivalent in Cera / Parryware.
S&F in repairs wall mounted water closet pan of size 520x360x410mm fixed with anchour fastener, outlet pipe & accessories all as specified and directed. Make : Cat Part No20104 of Hindware or equivalent in Cera / Parryware.
S&F in repairs 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed. Make:-Jaquar/ Cera/Hindware .
S&F in repairs 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed. Make:- Jaquar/ Cera/Hindware .
S&F as in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed screwed both ends for iron pipe or for unions all as specified and directed.
S&F as in repairs 40 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions all as specified and directed.
S&F PVC connection 15mm size PTMT nuts of length 450 mm all as specified and directed.
S&F as in repairs 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make:- Jaquar/ Cera/Hindware .
S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule. with wall flange all as specified and directed. Make:- Jaquar/ Cera/Hindware .
M&L in repairs 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower(with bush and piston Divertor fittings) with aerator all as specified and directed. Make:- Jaquar/ Cera/Hindware .
M&L in repairs for fancy type 15 mm bore central hole basin mixture with 'U' shaped round casted spout with 3" long pipe connection with aerator all as specified and directed. Make : Jaquar Cat Part No CON-169KNB or Equivalent of Prayag / Parko.
S&F in repairs 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1 metre long all as specified and directed. Make:- Jaquar/ Cera/Hindware .
S&F in repairs fancy type CP towel rail 61 cm long all as specified and directed. Make : Jaquar/ Cera/Hindware .
S&F in repairs CP towel ring all as specified and directed. Make:- Jaquar/ Cera/Hindware .
S&F in repairs CP soap dish all as specified and directed. Make:- Jaquar/ Cera/Hindware .
S&F in repairs CP toilet paper holder all as specified and directed. Make:-Jaquar/ Cera/Hindware .
S&F sheet glass corner shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed.
S&F in repairs 15 mm bore overhead shower of size 150x150mm single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 200 mm long (stainless steel) square shape with wall flange all as specified & directed. Make:- Cera Cat Part Not F7010506AB or Equivalent of Jaquar / Parko.
S&F as in repairs ss grating round 125mm size of anti- cockroach, anti-clog, anti faulall as specified and directed.
S&F in repairs 15 mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed shank and fly nuts all as specified & directed. Make:- ESS ESS CROMA Cat Part No C 201 or Equivalent of Jaquar / Parko.
S&F in repairs water closet seat cover any coloured pattern with flat bottom and mild steel chromium plated or aluminium hinging devices all as specified and directed. Make : Cat Part No S1020101 of Cera or Equivalent in Hindware / Parryware.
S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm all as specified and directed. Make : Blue Star Model No SBSD-127 or equivelant of Nirali / Prayag
S&F in repair Kitchen sink without drainage board made of stainless steel 1 mm thick, with plugs, washers and waste pipe & coupling including bedding in cement morter to dwarft wall or including fixing GI cantilever brackets as per site requirement and connecting with suitable size of pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 178mm (or nearest size as per Cat Part specified) all as specified & directed. Make : Blue Star Model No SSSB-06A or equivalent of Nirali / Prayag.
M&L in repairs 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed.
Demolition of cement concrete in ground floor & paving n. exc 15 cm thick (below or above GL) unreinforced all as specified and directed.
M&L PCC 1:4:8, type D2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete for sunken floor treatment all as specified and directed.
M&L for applying evenly a tack coat of industrial grade bitumen 85/25 grade @ of 1.2 Kg/Sqm including cleaning of surfaces in sunken floor treatment all as specified and directed.
M&L for rendering 10 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces, with using liquid water proofing compound @ 200 ml per 50 kg bag of cement or as per manufracture's instructions, finished surfaces even and smooth using extra cement all as specified and as directed. Note: WPC shall be measured and paid for seperately under relevant item.
Supply only liquid water proofing compound all as specified and directed. Make : Pidilite / Sika / Fosroc.
S&F in repairs vitreous China squatting pan, ' Orissa pattern, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including taking down existing squating pan all as specified and directed. Make : Cat Part No S3010104 of Cera or Equivalent in Hindware / Parryware.
S&F in repairs 2.00 mm thick PVC tile/sheet laminated plain coloured, marbled mosaic or mottled finish of any colour laid with approved rubber based adhesive in floors including preperation of floor surface all as specified and directed. Make : Royal House / Premier Poly Film Ltd.
K.C.P ENTERPRISES
RAMESH ENTERPRISES
M/S V N ENTERPRISES
RUPESH CONSTRUCTION CO
NATH CONSTRUCTION
Nagma Enterprises
Nilesh Construction
SHREE JAGDISH FURNITURE CO.
Bright Construction Co
Unitech Enterprises
ASHOK CONSTRUCTION
Colaba Group Works
Bidder Name
Unitech Enterprises
Frends Enterprises
K.C.P ENTERPRISES
Nilesh Construction
RAMESH ENTERPRISES
ASHOK CONSTRUCTION
NATH CONSTRUCTION
Colaba Group Works
Bright Construction Co
SHREE JAGDISH FURNITURE CO.
RUPESH CONSTRUCTION CO
Nagma Enterprises
M/S V N ENTERPRISES
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .