PROVISION OF VEHICLE PARKING SHED IN MT SECTION AT ASTE, SPECIAL REPAIR TO AMF PANELS AT SDI, AF AND CERTAIN SANCTIONED WORKS UNDER AGE BR-1 AND AGE E/M OF GE (AF) MARATHAHALLI.

Amount

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for as in Sunken Floor etc. complete all as specified and directed.

Excavation Post holes in Soft / loose soils (or similar holes) each n.exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, complete all as specified and directed by Engineer-in-Charge.

Material and Labour for Plain Cement Concrete (1:3:6) type C2 using 40 mm graded stone aggregate as in foundations filling and mass concrete Complete all as specified and as directed.

Material and Labour for joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e., within 20mm of the length indicated) with Conforming to Fe-410-W (Gde-E-250) quality - A Complete all as specified and as directed by Engr-in-Charge.

Material and Labour for Mild Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161 - 1998 grade St - 240 Complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

Material and Labour Pre-Cast Cement Concrete block masonry with solid blocks, in PCC 1:3:6, type C1, using 20mm graded stone aggregate exc. 10 cm in width and setting in CM (1:6), complete all as specified and as directed by Engr-in-charge.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in CM (1:4) finished even and fair without using extra cement etc complete all as specified and as directed by Engr-in-charge.

Material and Labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint any tint over a coat of alkaline resistant primer, Complete all as specified and directed by Engr-in-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc., brushing neat cement slurry with 3.0 Kg of cement per sqm complete all as specified and directed.

Material and Labour for 50 mm thick Plain Cement Concrete (1:2:4), typeB1 (using 20 mm graded stone aggregate) as in floors and pavings etc finishing with spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green, complete all as specified and directed.

Froming conctraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound etc. complete all as specified.

Removing/taking out the earth/mud/vegtation etc from undernearth of culvert and drain etc to a distance exc. 1.5Km but n.exc 5 Km at depositing where directed.

Demolition of Brick work or Stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings dressed stonework and precast concrete articles all as directed.

Demolition of Cement Concrete (unreinforced) in ground floor and pavings n.exc 15cm thickness (below or above ground level) etc. complete all as specified and directed.

Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc for shafts, wells, manholes, columns, pier holes etc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in Hard / Dense soil all as specified and directed.

Material and labour Plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in foundations of filling and mass concrete all as specified and directed.

Material and Labour for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in Copings, Cills, bed blocks, filling the pressed steel frames, etc and the like including weathering, slightly rounded or chamfered angles and throating including use of formwork, Complete all as specified and as directed.

Returning, filling in including spreading, levelling watering and well ramming in layers not exceeding 25cm thick in hard / dense soil complete all as directed by Engr-in-charge.

Removing excavated soil material exc 1.5 Km but n.exc 5 Km and depositing where directed complete all as directed by Engr-in-charge.

Material and Labour for 200mm dia Reinforced concrete drain pipes, NP3 laid and jointed complete with collars etc including PCC 1:3:6 type C-2 concrete bed to drain pipes, packing under and haunching against the sides of pipes after they are laid and tested complete all as specified.

Material and Labour for Framed work such as grills, gratings, etc., with ends of bar shouldered and or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks & similar work conforming to Fe 290 Gde E-165 all as specified.

Material and Labour for preparation of new steel surfaces of any description not otherwise descriped over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc crome primary, complete all as specified and as directed by the Engr-in-charge.

Supply and Fix false ceiling grid of size 600mm x 600mm system using hot dipped galvanized steel section with pre coated capping, main tee of size 24 x 32mm having 0.27mm thick at every 1200mm centre to centre, cross tee of size 24 x 27mm having 0.25mm thick at 600mm centre to centre and wall angle of size 19 x 19 mm having 0.35mm thick fixed to the periphery of the wall, and suspended at every 1200mm centre to centre in both directed using 2.00mm thick GI wire and fixing 600x600mm x 14mm mineral fiber tegular edge ceiling tiles complete all as specified and as directed. Make : Amstrong or equivalent.

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC cassing capping complete with and including all accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly for One Light point/Exaust fan point/5 Ap socket on independent board conctrolled by one one way switch complete all as specified and directed by Engr -in -charge

Supply and fix switch piano flush type, 05/06 Amps single pole, one way 240 volts in replacement of old u/s complete all as specified and directed.

Supply and fix of ceiling rose surface type PVC / Polycarboen, isolated body with three terminals in replacement of old u/s complete all as specified and directed.

Supply and fix MCB DB TPN 4 way, Double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match the existing in replacement of old unserviceable item complete all as specified and directed.

M & L for sub main wiring complete with 4 run of 4 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 4 sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed by Engr -in -charge

Supply and Fix MCB SP 6-32 Amps, 'C' series, 240V complete including making conections all as specified and directed. Make : Havells/standard or equivalent.

Supply and Fix MCB SPN 32 Amps, including making conections all as specified and directed. Make : Havells/Standard or equivalent.

Supply and fix Lumiline LED tube with patti, 4 feet, 18 watts complete all as specified and as directed. Make : Bajaj Cat part No : BCLSB 18 WH or equivalent model in Crompton Greaves Ltd/Philips

Materila and Labour for Modular switch 1 way 6 Amps 1 Module complete all as specified and directed.

Materila and Labour for Modular Socket 6 Amps 2/3 pin combined 2 Module complete all as specified and directed.

Supply and Fix white cover plate with frame 3 modular complete all as specified and directed.

Supply and Fix metal flush box 3 module complete all as specified and directed.

M & L for sub main wiring complete with two runs of 1.5 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 1.5 sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed by Engr -in -charge

Material and Labour for wall mounting fan 400mm sweep, 230V, AC all as specified. Make : Havells model Swing D'zire or equivalent in other make.

Provision of Electronic liquid chemical dosing system, supply and fixing chemical dosing system suitable to inject solution up to 6 LPH comprising dosing pump coupled with three phase elctric motor assembly with agitator in one motor agitator with SS sweep blade duly FRP coated, FRP tank 100 ltrs capacity NRV complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete along with DOL starter and suction and discharge PVC tube all as specified and directed by Engr-in-Charge. Make : Satya sai aqua pura services/Pristine water/Sombarsi Enviro Engr Pvt Ltd

Provision of Electronic liquid chemical dosing system, supply and fixing chemical dosing system suitable to inject solution up to 12 LPH comprising dosing pump coupled with three phase elctric motor assembly with agitator in one motor agitator with SS sweep blade duly FRP coated, FRP tank 100 ltrs capacity NRV complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete along with DOL starter and suction and discharge PVC tube all as specified and directed by Engr-in-Charge. Make : Satya sai aqua pura services/Pristine water/Sombarsi Enviro Engr Pvt Ltd

Material and Labour for 25mm PP-R gate valves, (brass insert) all as specified and directed by Engr-in-charge.

Cutting existing steel tubing/PVC pipe for alterations or additions for 25/50/80mm all as specified.

M & L for sub main wiring complete with two runs of 2.5 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 2.5 sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed by Engr -in -charge

Supply and fix of switch socket outlet 3 pin, 05/15 Amps (2 in 1 multipurpose) flush type 240 volts in replacement of old u/s complete all as specified and directed.

Material and labour Plain cement concrete (1:2:4) type C1 using 20 mm graded stone aggregate as in PCC platform concrete all as specified and directed.

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC conduit complete with and including all accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly for 3 pin 15A socket multipurpose on independent obard, One bell point controlled by one switch complete all as specified and directed by Engr -in -charge

M & L point wiring with 2.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC conduit complete with and including all accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly for 3 pin 15A socket multipurpose on independent obard complete all as specified and directed by Engr -in -charge

Supply and fix of switch socket outlet 15/5 Amps (2 in 1 multipurpose) controlled by one switch complete all as specified and directed.

Supply and fix LED fitting of 20 watts, square surface mounted LED flat panel PDC aluminium housing and PMMA diffuser makes it a robust Luminaire alongwith 20W LED lamp complete all as specified. Make :C&S LTDC 0161820W LED, or equivalent in Havells/Philips.

M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 6 sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed by Engr -in -charge

Supply and Fix MCB DB SPN 8 way, S&F MCB DB SPN 4 way with 200 Amps rated busbar, Double door, 240 Volts flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.

Materila and Labour ceiling fan 1200mm heavy duty single phase energy saving model and making connections from ceiliing rose/connector to fan complete all as specified and directed.

Supply and Fix electronic fan regulator stepped, socket type 400W including removing the switch board panel and making the provision for fixing the electronic type regulator and refixing the same complete all as specified and directed.

Supply and fixing in repairs 36W LED Fitting, 2'x2' recess/Surface LED flat panel with high brightness LED for glare free homogenous illumination including LED driver complete all as specified including taking down old unserviceable fittings. Make : Crompton Cat No : LCTLRN-36-FO-CDL equivalent Cat No of Bajaj/HPL

Supply and Fixing LED street light fitting 25 Watts, with powder coated pressure die cast aluminium housing and IP 66 protection, built in control gear complete with anodised reflector, toughened heat resistant glass cover LED 25 watts white colour lamp, connector block with all accessories per wired including necessary electric connection all as specified and as directed. Make : Cat No : LSTS - 25 - CDL cromption or equivalent model in Bajaj/Havells/Philips

Disconnecting power supply from the main panel and removing the existing UNSV LT panel all as specified & directed by Engr-in-charge

S&F in replacement of MCCB 400 A 4 pole 36 KA 50 Hz AC fixed in existing APFC panel board/sheet metal enclosure including connecting up incoming/outgoing cables with suitable lugs and testing complete all as specified and as directed. Make: L&T/ABB/SIEMENS/LEGRAND

S&F in replacement APFC relay 12 stages Make: EPCOS or equivalent in L&T.

S&F in replacement capacitor heavy duty type MPP of rating 5 KVAR 440V,50 Hz AC cylindical type complete all as specified and as directed. Make: EPCOS/L&T

S&F in replacement capacitor heavy duty type MPP of rating 2 KVAR 440V,50 Hz AC cylindical type complete all as specified and as directed. Make: EPCOS/L&T

S&F in replacement capacitor heavy duty type MPP of rating 25 KVAR 440V,50 Hz AC cylindical type complete all as specified and as directed. Make: EPCOS/L&T complete all as specified and as directed

S&F 16Amp TP MCB 10 KA complete all as specified and as directed

S&F in replacement 5 KVAR, 3P capacitor duty contactor complete all as specified and as directed

S&F 10Amp TP MCB 10 KA complete all as specified and as directed

S&F in replacement 2KVAR 3P capacitor duty contactor 3 P complete all as specified and as directed

S&F 25Amp TP MCB 10 KA complete all as specified and as directed

S&F in replacement 25KVAR 3P capacitor duty contactor 3 P complete all as specified and as directed

S&F 230 V 22.5 mm dia Green/Red colour Flush shrouded type Luminous push button (on/off) complete all as specified and as directed

S&F LED type on indicating lamp- RED Make- ESBEE/L&T/SIEMENS complete all as specified and as directed

S&F 6 Amp SP control MCB 10 KA, C curve complete all as specified and as directed

S&F exhaust fan of suitable size fitted complete within the panel for heat dissipation purpose generated in the cubicle complete all as specified and as directed

Supply,laying of cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable(heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5 core 240 sqmm in duct/wall complete all as specified and as directed

Cable termination including gland- 1 set and lugs-4 Nos for 400 sqmm cable complete all as specified and as directed

Cable termination including gland- 1 set and lugs-4 Nos for 240 sqmm cable complete all as specified and as directed

Cable termination including gland- 1 set and lugs-4 Nos for 180 sqmm cable complete all as specified and as directed

Cable termination including gland- 1 set and lugs-4 Nos for 90 sqmm cable complete all as specified and as directed

M&L for angle iron support fabricated from structural steel sections across duct complete all as specified and as directed

Supply and Fixing Pre-paid Meter, PE5121 Micro Processor Based, single phase 240 Volts multifunctional Energy Meter current 10/40A (IS 15884 Standard) with inbuilt default RS 485 & RF recharge facility, Electronic & Mechanical Tamper proof, including wiring chamber & with inbuilt 2 way communication for disconnection & reconnection facility of load, through Elnet pro EMS&EBS version 5.1 web based software, by secured user pass word login, including meter connection complete all as specified and directed. Make : Elmeasure.

Material and Labour for bell Push flush type 5A SP 240 V all as specified and directed.

Material and Labour for bell (Ding-Dong) 230 Volts single pole all as specified and directed.

Supply and installation of Deep freezer hard top more than 320 liter and up to 400 Litre capacity by Engr-in-Charge. Make:- Blue Star, CHF 400

Material and Labour for Earthing complete with copper plate electrode electrode 600 mm x 600 mm x 3.15 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to Copper earth strip 20x3 mm by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., Complete all as specified and as directed. Note: (i) The unit rate includes earth wire and protection pipe up to (maximum 7.5 metre from earth plate) earth point/test point. (ii) Earth pit shall be constructed at least 0.5 metre away from each earth chamber.

Material and labour for Maintenance free earthing system consists of Two pit using copper - bonded steel rods, Earth enhanching compound and exthermic welding for earth pit consists of 17.2 MM Copper bonded steel cored electrodes 10 feet long- 02 No , enhancing Compound 10 Kg bag - 4 Nos, inspection chamber Installation of the Earthing system with single earth pit, digging the earth pit with depth 8 feet. interconnecting the copper bus bar with exothermic powder complete all as specfied and directed by Eng-in-Charge Note: i) Earth resitance value shall be Less than 2.0 ohms ii) 25mm x 5mm x 300 mm copper bus bar - 1 No iii) 25mm x 25mmx 150mm bus bar - 1 No iv) Earth conductor beyond 7.5 Mts shall be measured and paid seprately.

Supply and Fixing RF Card recharging unit for recharging pre paid Meter complete all as specified and directed.

Siddivinayaka Constructions

UNIVERSAL ENGINEERING

H S S ENGINEERS AND CONTRACTORS

devan enterprises

RAHUL ENTERPRISES