Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹26.1 LAccepted-AOC | 1 | Accepted-AOC ACCEPTED | |
| 2 | 2₹26.5 L+₹37,765 (1.45%)Rejected-AOC SENGADU PO EDAPPULI NADU KOLLIHILLS TK PIN 637411 | KOLLIHILLS | NAMAKKAL | TAMIL NADU | 637411 | 2 | Rejected-AOC REJECTED |
Tender Value
₹36 L
EMD Value
₹36,000
Closing Date
10 Jul 2024, 3:00 pmClosed
Commissioner
113 Thamilzh Salai(Palai Road) Thoothukudi Corporation
Construction Of Study Centre Shed no 2 and Hexagon Shape Shed No 5 6 South West Side Entrance side Lawn Tree planting arrangements Shifting and erection of E Toilet water supply arrangements Prefabricated KIOSK shop and CCTV arrangements
2024_MAWS_456739_1
15/24-25/AEE(W)
Open Tender
Civil Works
Works
30 days
Thoothukudi Corporation
Refer Tender Notice
1 document required · 1 mandatory
₹0
₹36,000
23 Jul 2024
22 Jun 2024
10 Jul 2024
22 Jun 2024
10 Jul 2024
5 Jul 2024
Amount
Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete
Plain Cement Concrete 1:5:10 (one cement, five fine aggregates and ten coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
Supply and fabrication of steel required for all RCC items of works involved in the schedule, cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlapping to the required length whenever necessary and placing the reinforcement in position as as per design given and specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc complete as per standard specification
Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed
For footing and grade beam
For rectangular Columns
Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 3500 Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)
Upto basement
Brick work in CM 1:5 (one cement & five sand) using II Class Country bricks of size 8 3/4"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification
Foundation and beasement
Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.
Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications
Paving the floor with design Rajasthan kotta tiles (colour and shade as directed) of size 610 mm x 610mm x 20mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification
Paving the floor with granite slab of Jet Black approved quality and colour of size 1200x600xthick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand)18mm to20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work
Porotherm ornamental Grid Blocks work of size 400mm x 200mm x 200mm in CM 1:5 including finishing, curing, etc., complete complying with standard specification
Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating as per Design given by the departmental officers etc, complete as per standard specification
Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.
Supplying and fixing in position of best approved colour design and quality Polycarbonate Sheet 6mm thick with necessary 'U' or 'J' bolts, bitumen washers and cutting the sheets to the required size.etc. complete.
Supplying and fixing of Granite three seater sitting bench with table approved quality and colour with fixing charges including the cost all materials etc.,complete, in all floors.
Painting two coats with ready mixed Exterior Emulsion Paint approved quality and colour including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.
Wiring with 2x1.5sq.mm. (22/0.3) PVC insulated unsheathed SC copper conductor of 1100Vgrade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5AFT switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light/fan point (for electronic regulator) (5 points per coil)
Wiring with 2x1.5sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5A 3 pinnon inter locking Wall socket with 5A flush types witch with paintingo f suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point
Wiring with 2x4sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductorcable of 1100V grade insuitable pipe on wall and ceiling with PVC accessories with 150mmx100mmx63mm TWswitch box for 15A3 pinnoninter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point
Supply and fixing of18W 4 Feet LED Fitting with LED fitting including all cost of material and labour charges etc Complete
Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18")
Supply and fixing MS Charging Station of size 300x100x1000mm including all cost of material and labour charges etc Complete
Supplying and Fixing of Stainless steel Tamil Letters of size 100cm to 150 cm and approved colour. The colour treatment process is achieved with power colour coat and then the processed coloured layer is set into the kiln for the heat treatment process including all cost of material and labour charges etc complete
Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer
Supplying and fixing of RCC precaust pollard with approved quality and colour with fixing charges including the cost all materials etc.,complete, in all floors.
Supplying and fixing Granite stone 50mm thick with fixing charges including the cost all materials etc.,complete, in all floors.
Providing Gardening and Landscaping with korean grass including Mannur and bed layer of red soil to 150mm thick, including cost and conveyance of all materials to site etc., complete as per standard specification .
Providing of Tree Planting including Mannur and bed layer of red soil to 150mm thick, including cost and conveyance of all materials to site etc., complete as per standard specification .
Providing laying 20mm dia PVC pipes for internal and external watersupplyarrangements including the cost all materials etc.,complete, in all floors.
Providing laying 110mm dia PVC pipes for internal and external watersupplyarrangements including the cost all materials etc.,complete, in all floors.
Engaging crane 80 tonne capacity for Shifting of E Toilet including the cost and conveyance of labour charges etc complete
Engaging JCB for erection E Toilet including the cost and conveyance of labour charges etc complete
Supplying and fixing of Stainless sink of size 600 mm x 450mm including the cost of material and labour labour charges etc complete
Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work.
Supplying and fixing of RCC Rings of 0.90M Dia the including all cost of material and labour labour charges etc complete
Supplying delivery and fixing of Prefabricated KIOSK shop - PPGI Model of Size: 12' x 8' x '6" the including all cost and conveyance of material and labour labour charges etc complete
MURUGAN (BID ID -1078738)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .