Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.6 LAccepted-AOC 852 EKTA VIHAR 1 C NEAR ANAND NAGAR 9 B PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹27.9 L+₹2.8 L (11.4%)Rejected-Finance 300 PREM BASTI 10 SANGRUR SANGRUR PUNJAB 148001 | SANGRUR | PUNJAB | 148001 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹31.4 L+₹6.3 L (25.3%)Rejected-Finance 44 NEAR DURGA MANDIR TRIPURI TOABA TRIPURI TOWN PATIALA 147004 PB | PATIALA | PUNJAB | 147004 | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹31.8 L+₹6.8 L (27.0%)Rejected-Finance | L4 | Rejected-Finance NOT BEING LOWEST | |
| 5 | L5₹32.2 L+₹7.2 L (28.5%)Rejected-Finance H NO 597 SEONA ROAD RANJIT NAGAR PATIALA PB 147001 | PATIALA | PATIALA | PUNJAB | 147001 | L5 | Rejected-Finance NOT BEING LOWEST |
| Sl No | Description | Qty | Unit | Arneja Builders L1 | SWAMI ENGINEERS L6 | Jawandha Enterprises L5 | m/s s.n. builders L8 | The Rahul Vig L7 | Mohinder Pal and Sons L3 | AGGARWAL & CO L2 | Gurcharan Singh Enterprises L4 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply and fix in replacement electronic driver with power factor correction suitable for 45/50/60 Watt LED street lights, input AC 85-300V, input frequency 50/60 Hz, output voltage DC 22-38V, output current 1500mA (+/-) 5%, waterproof level :IP 65, shell material : aluminium with IS 15885, complete all as specified and as directed. | 70 | Each | 200 ₹14,000 | 300 ₹21,000 | 150 ₹10,500 | 70 ₹4,900 Lowest | 200 ₹14,000 | 150 ₹10,500 | 100 ₹7,000 | 313 ₹21,910 |
| 2.00 | Supply and fix in replacement electronic driver with power factor correction suitable for 70-90 watt LED street lights, input voltage 70V AC to 300 V AC , power factor 0.99 (Unity) , over voltage 300 V cutt off , short and open circuit protection isolated, surge protection up to 10 to 12 Kv, maximum output voltage 55 Kv, maximum current up to 1.5amp waterproof level :IP 65, shell material : aluminium with IS 15885, complete all as specified and as directed. | 100 | Each | 250 ₹25,000 | 400 ₹40,000 | 200 ₹20,000 | 80 ₹8,000 Lowest | 150 ₹15,000 | 200 ₹20,000 | 100 ₹10,000 | 370 ₹37,000 |
| 3.00 | S&F in replacement (as per existing) Rectifier plate with diod assembly complete all as specified and as directed. | 3 | Each Set | 2,500 ₹7,500 | 2,000 ₹6,000 | 500 ₹1,500 | 3,000 ₹9,000 | 150 ₹450 Lowest | 1,800 ₹5,400 | 200 ₹600 | 613 ₹1,839 |
| 4.00 | Supply and fix in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with IP 65/66 protection complete all as specified and as directed. | 628 | Each | 1,100 ₹6,90,800 Lowest | 1,800 ₹11,30,400 | 1,600 ₹10,04,800 | 2,900 ₹18,21,200 | 1,500 ₹9,42,000 | 1,700 ₹10,67,600 | 1,850 ₹11,61,800 | 1,750 ₹10,99,000 |
| 5.00 | Supply and fix in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with IP 65/66 protection complete all as specified and as directed. | 300 | Each | 1,000 ₹3,00,000 Lowest | 1,600 ₹4,80,000 | 1,550 ₹4,65,000 | 2,200 ₹6,60,000 | 1,800 ₹5,40,000 | 1,600 ₹4,80,000 | 1,750 ₹5,25,000 | 1,550 ₹4,65,000 |
| 6.00 | Supply and fix in replacement LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with IP 65/66 protection complete all as specified and as directed. | 50 | Each | 800 ₹40,000 Lowest | 1,500 ₹75,000 | 1,000 ₹50,000 | 1,800 ₹90,000 | 1,250 ₹62,500 | 1,180 ₹59,000 | 1,250 ₹62,500 | 1,113 ₹55,650 |
| 7.00 | Supply and fixing in replacement LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,complete all as specified and as directed. | 50 | Each | 2,000 ₹1,00,000 Lowest | 2,200 ₹1,10,000 | 2,500 ₹1,25,000 | 4,000 ₹2,00,000 | 3,500 ₹1,75,000 | 2,900 ₹1,45,000 | 2,700 ₹1,35,000 | 2,313 ₹1,15,650 |
| 8.00 | Supply and fixing in repair automatic street light control switch single phase 5-8 KW 40 Amps using infrared sensor based nature switch for automatic switching of street lights. Nature switch operation should be based on Natural light lux level. The sensor along with suitable power contactors and incoming out going MCBs should be enclosed pole/wall mounted thermo plastic polycarbonate enclosure conforming to IP 66 protection class 2.
Make: Nature switch:/BAJAJ/Havells/crompton
Contactors: BCH/L&T/Schneider
MCBs: Hager/Schneider/L&T
Enclosure: Hensel/GE / Indo-asian /C&S
Circuit wiring: Polycab/ Finolex /Havells | 5 | Each | 13,000 ₹65,000 | 13,500 ₹67,500 | 14,000 ₹70,000 | 15,000 ₹75,000 | 12,000 ₹60,000 | 14,000 ₹70,000 | 14,000 ₹70,000 | 10,513 ₹52,565 Lowest |
| 9.00 | Supply and fix in replacement integrated auxiliary contactor 65 Amps, AC 3 phase, 220 to 415 volt, 50/60 Hz, three/four pole, contacts 2NO+2NC conforms to IEC/EN -60947-4-1 suitable for street light timer panels, complete all as specified and directed .
Make:- Havells Cat No. IHPHA065300W , Legrand Cat No. 416146 or equivalent in C&S/Schneider. | 2 | Each | 2,500 ₹5,000 | 3,500 ₹7,000 | 10,000 ₹20,000 | 4,500 ₹9,000 | 5,000 ₹10,000 | 3,500 ₹7,000 | 1,900 ₹3,800 Lowest | 3,213 ₹6,426 |
| 10.00 | Supply and fix in replacement integrated auxiliary contactor 40 Amps, AC 3 phase, 415 volt, 50/60 Hz, three pole contacts 1NO+1NC conforms to IEC/EN -60947-4-1 suitable for street light timer panels, complete all as specified and directed .
Make:- Havells Cat No. IHPBC040100, Legrand Cat No. 416111 or equivalent in C&S/Schneider. | 2 | Each | 2,000 ₹4,000 | 2,500 ₹5,000 | 5,000 ₹10,000 | 4,000 ₹8,000 | 5,000 ₹10,000 | 3,200 ₹6,400 | 1,900 ₹3,800 Lowest | 3,213 ₹6,426 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
11 Jul 2025, 6:00 pmClosed
MAJ MOHAMMED AQIL AZEEM
GE NORTH PATIALA MILITARY ENGINEER SERVICES SANGRUR ROAD PATIALA CANTT
REPAIR/MAINT OF DG SET, SECURITY LIGHTS, FLOOD LIGHTS, TIMER SWITCH, SECURITY LIGHTS CABLES AND CONNECTED WORKS AT NEW CANTT UNDER GE NORTH PATIALA
2025_MES_713893_1
GE (N)/TOKEN-20/2025-2026
Open Tender
Civil Works
Item Rate
240 days
PATIALA
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE N PATIALA
₹80,000
Yes
11 Sept 2025
12 Jun 2025
14 Jul 2025
12 Jun 2025
11 Jul 2025
27 Jun 2025
Amount
Supply and fix in replacement electronic driver with power factor correction suitable for 45/50/60 Watt LED street lights, input AC 85-300V, input frequency 50/60 Hz, output voltage DC 22-38V, output current 1500mA (+/-) 5%, waterproof level :IP 65, shell material : aluminium with IS 15885, complete all as specified and as directed.
Supply and fix in replacement electronic driver with power factor correction suitable for 70-90 watt LED street lights, input voltage 70V AC to 300 V AC , power factor 0.99 (Unity) , over voltage 300 V cutt off , short and open circuit protection isolated, surge protection up to 10 to 12 Kv, maximum output voltage 55 Kv, maximum current up to 1.5amp waterproof level :IP 65, shell material : aluminium with IS 15885, complete all as specified and as directed.
S&F in replacement (as per existing) Rectifier plate with diod assembly complete all as specified and as directed.
Supply and fix in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with IP 65/66 protection complete all as specified and as directed.
Supply and fix in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with IP 65/66 protection complete all as specified and as directed.
Supply and fix in replacement LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with IP 65/66 protection complete all as specified and as directed.
Supply and fixing in replacement LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,complete all as specified and as directed.
Supply and fixing in repair automatic street light control switch single phase 5-8 KW 40 Amps using infrared sensor based nature switch for automatic switching of street lights. Nature switch operation should be based on Natural light lux level. The sensor along with suitable power contactors and incoming out going MCBs should be enclosed pole/wall mounted thermo plastic polycarbonate enclosure conforming to IP 66 protection class 2. Make: Nature switch:/BAJAJ/Havells/crompton Contactors: BCH/L&T/Schneider MCBs: Hager/Schneider/L&T Enclosure: Hensel/GE / Indo-asian /C&S Circuit wiring: Polycab/ Finolex /Havells
Supply and fix in replacement integrated auxiliary contactor 65 Amps, AC 3 phase, 220 to 415 volt, 50/60 Hz, three/four pole, contacts 2NO+2NC conforms to IEC/EN -60947-4-1 suitable for street light timer panels, complete all as specified and directed . Make:- Havells Cat No. IHPHA065300W , Legrand Cat No. 416146 or equivalent in C&S/Schneider.
Supply and fix in replacement integrated auxiliary contactor 40 Amps, AC 3 phase, 415 volt, 50/60 Hz, three pole contacts 1NO+1NC conforms to IEC/EN -60947-4-1 suitable for street light timer panels, complete all as specified and directed . Make:- Havells Cat No. IHPBC040100, Legrand Cat No. 416111 or equivalent in C&S/Schneider.
Supply and fix in replacement street light panels analog time switch (with battery back up), 3P Module, 24 hours program, programmable every 15 min, current capacity 16 Amps, suitable for 63/40/32 Amps street light timer, AC 3 phase, 110-240 V AC (1CO) base/ Din 16 pulse digital time switch,complete all as specified and directed . Make:- Indoasian Cat No. TA925450, L&T Cat No. WT2DCDS or equivalent in C&S/Schneider.
Supply and fixing PVC insulated copper cable 2.5 sqmm three core multi stranded flexible 1100 volts complete all as specified and directed
S & F as in replacement brackets 1.2 m long made to shape fabricated out of GI pipe Light grade 40 mm dia incl provn of socket nipple welded at one end to suit the light fitting and fix to pole including clamps made of FI 25x3mm with nuts and bolts of suitable size cutting, drilling and welding and fixing to pole and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed
Supply and fixing street light junction box of size 300 mm x 200 mm x 100 mm, made out of hot press moulded SMC with weather proof hinged door including self locking arrangement, out door type, IP-55, weather and vermin proof complete comprising of insulated / high quality PVC sleeves aluminium bus bar of capacity 63 Amps 04 Nos (three phase RBY and black for neutral) with and including 6 Apms MCB single pole, single phase 230 volts, including provision of 25 x 3 mm flat iron mounted on insulators, having arrangement of connecting incoming and outgoing cables complete and all as specified and directed.
Suppy and fix rigid non-metallic PVC conduit 20 mm dia exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete and all as specified and directed.
Servicing of DG set upto 10 KVA Make- Kirloskar, including replacement of following parts alignment of Alternator, Minor reapir and complete checking of fuel Pump after necessary inspection of DG set complete all as specified and directed ( spares shall be measured and paid separately under respective items of schedule here-in-after):-
Supply only Filter kit comprising of Air,Fuel and oil filters
Supply only Fan Belt as per sample
Dismantling Radiator assy complete including cleaning, washing with cleaning equipment and refitting the same complete all as specified and directed.
Supply & filling and topping up Engine oil of suitable grade.
Supply & replace Coolant for Radiator.
Servicing of DG set 40 to 50 KVA (SM/MES No- (i) 715/6010/DG/AL/06, (ii) - 261839W ) Make-Kirloskar, including replacement of following parts alignment of Alternator, Minor reapir and complete checking of fuel Pump after necessary inspection of DG set complete all as specified and directed ( spares shall be measured and paid separately under respective items of schedule here-in-after):-
Supply only Filter kit comprising of Air,Fuel and oil filters
Supply only Fan Belt as per sample
Supply only Diesel pipe set with clamp as per sample
Supply only Repair of diesel pump
Supply only Repair of nozzle
Supply only Battery lead
Supply only Vibration pad
supply only diesel water filter kit
Servicing of DG set 30 KVA (MES No- 263/6118-DG/AL/20 ( Make- Kirloskar) including replacement of following parts alignment of Alternator, minor work and complete checking of fuel pump after necessary inspection of DG set complete all as specified and directed ( spares shall be measured and paid separately under respective items of schedule here-in-after):-
Supply only Diesel filter kit
Supply only Oil filter kit
Supply only Fan belt as per sample
Supply only Diesel pipe set with clamp as per sample
Repair of diesel pump
Repair of nozzle
Supply only Battery lead
Supply only Vibration pad
Supply only Diesel water filter kit
Supply and replace contactor AC 415 volt , operating coil -230 volts , four pole type MCX 32 of L&T or equivalent in Scheneider / C&S / Legrand including auxiliary contacts 2NO+2NC suitable for AMF panel complete all as specified and directed.
Supply and replace contactor AC 415 volt , operating coil -230 volts , four pole type MCX 33 of L&T or equivalent in Scheneider / C&S / Legrand including auxiliary contacts 2NO+2NC suitable for AMF panel complete all as specified and directed.
Supply and replacement of AMF panel auto start relay / as per existing and with copper wiring of AMF panel with suitable size wire complete all as sample of existing relay, complete all as specified and directed.
Supply & install in repair Lead Acid Battery 12 V 150 AH complete all as specified and directed. Make- EXIDE/AMRON/Boch
Supply and replacing AVRs unit of alternator of DG Set 30 to 50 KVA capacity as per existing type and model and all as per the direction of the Engr-in-charge.
Supply and replacing complete hose pipe set with clamps for DG sets of DG set capacity 12.5 KVA to 50 KVA as per existing type and size.
Dismantling AC alternator assembly of DG set any capacity and exciter of any capacities including taking out of worn out windings of Rotor and stator incl rewinding the coils with suitable guage of super enamelled winding wire of copper , renewal of insulation materials, heat varnishing, connecting leads and terminal plates all as required to make serviceable of the DG and including reassembling the same after necessary testing all as directed. The item rate includes shifting of altternatos from location to workshop and back to the installation complete all as directed Note : Winding coils of super enameled copper shall be measured & paid separately under relevant item of the schedule.
M&L for copper winding for item No-27 above as per existing guage complete all as specified and directed
Taking down self starter assembly of DG set of capacity 30/40/50 KVA, 12 volt from the existing position, opening in to parts, sort out the unserviceable items like carbon brush, pinion etc. and replace the same with new one including rewinding of field coils, re-assembling and re-fixing the same in its original position including to and fro conveyance charges to work shop and testing and all as per the direction of the Engr-in-charge.
Taking down the Dynamo 12/24 Volts from the existing position of 30/40/50 KVA, shifting to the work shop and back , opening into parts, cleaning to sort out the unserviceable parts, replace by new one, rewinding and varnishing, heating of coil, reassembling and re-fixing to its base including to and fro conveyance charges for work shop to the site for any capacity of DG and all as per the direction of the Engr-in-charge.
Dismantling fuel injection pump (FIP) of DG set carefully from 30/40/50 KVA, opening in to parts, for maintenance, servicing, tuning by overhauling and calibration up to 6 cylinders, adjustment of nozzle pressure and other controls, replacement of unserviceable spares, re-fixing the FIP on its original position including to and from charges to the work shop and all as per the direction of the Engr-in-charge.
Labour only for complete calibration for function and checking of AMF panel with and including minor repairs,tightening of wiring cables complete all as specified and directed at site
Material and labour for painting by using spray painting method for DG set canopy/complete body/LT panel board (After removing incoming/out going electrical connection and refixing the same) with two coats of superior quality synthetic enamel paint after cleaning of existing surface, removing rust including marking of incoming/outgoing feeder with letters, MES/SM Nos complete and all as per the direction of the Engr-in-charge.
Day to day complaints of street lights of various type for working height varies from 9m to 15m in the juridiction of AGE E/M, GE (N) Patiala within 15 km radious incl removing carbon from LED light connection by deploying dedicated team having the experience in the same field. Contractor has to provide all required Tool and plants for street light fault rectification. Contractor will make record of all given complaints and rectified complaints updated on daily basis. Street light complaints should be rectified within 24 hrs after intimation via any communication mode. Contractor is to collect serviceable lights from E/M stores and deposit U/S LED lights back to store. If the comaplint is not rectified within stipulated time contractor will bear penality of Rs 100 per day per complaint. Note :- (i) Necessary suitable vehicle shall be contractors own arrangement for carrying man power, tools and store. (ii) One repair/replacement of street light shall be counted as one job. (iii) The complete arrangement ie. veh, manpower tool and plants, adhesive tape roll etc is enclusive in this quoted rate.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtr in depth for laying of cables errecting of pole including getting out in any kind of soil complete all as specified and directed.
All as per item no 34 but exceeding more than 1.5 m in depth
Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.
Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.
Clean dry sand laid in trenches/ducts for bedding and cushioning to cable, including spreading and leveling complete, all as specified. Note:-(i) Consolidated/punned sand shall be considered for purpose of payment.(ii) Sand shall be same as specified for plastering work.
M & L for precast concrete cable covers type 2 flat, size 250mmx150mmx40mm laid dry in trenches for cable protection all as specified and directed by Engineer in Charge.
Supply,laying, commissioning and testing or passing through pipe, XLPE insulated, armoured, electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade in duct / trenches for small length for extension/replacement of the defective cable of nominal cross sectional area 10 sqmm 4.0 core including brass compression cable gland, terminal aluminium lugs etc making connection and testing complete all as specified and directed. Note :-(i) Pipes and bricks for protection, mild steel clamp nut and bolts sand cushioning shall be measured and paid separately.
All as per item No. 40 here-in before but for cable of size 4 core 16 sqmm.
Supply,laying,galvanised steel tubing light grade complete with all fitting of size 40 mm dia for cable protection along with pole across road etc. Complete all as specified and directed by Engr-in-Charge.
M & L for PCC 1:4:8 TYPE D-2 using 40 mm graded broken stone aggregate as in mass concrete in foundations etc . complete all as specified and directed.
Cutting hard standing / road for laying of cable / protection pipe and making good the existing surface with PCC 1:2:4 type B-1 complete all as specified and as directed.
M&L for Boring of holes under road, pavement, hard standing by trench-less technology using ultrasound technique and necessary machine suitable to pass through 40 to 80 mm bore GI tubing and cable etc complete all as specified and as directed.
Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.
Supply and fixing in replacement 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor of size 10 Sqmm X 2 Core served with inner sheathing of PVC tape and overall PVC sheathed in service connection wire one twin core cable flat or circular complete all as specified and directed. Note :- One roll of cable consist 90 RM cable in each roll of cable.
M & L for taking out of injector of DG Set of any type/make of capacity 10 KVA to 50 KVA disconnection and opening of fuel injector assembly , carrying complete overhauling / servicing fuel injector system , including renewal of injector kit , calibration of injector , checking of pressure complete for each injector and re-assembling the same in original positon by making proper fuel connnection and testing for smooth operation complete all as directed .Note : renewal of parts to be measured & paid separately
Supply only Needle valve
Supply only Nozzle holder
Supply and fixing high pressure fuelline sutable for DG set of capacity 10KVA to 50 KVA
Opening /taking out of fuel injection pump (FIP) of DG Set of any type/make of capacity 10 KVA to 50 KVA, disconnecting of fuel injector line, carrying complete overhauling /servicing of injecor pump, calibration of fuel pump as per manufacturer instruction , assembling of the same with DG Set properly in original position , checking the allignment , making proper fuel connection including renewal of unserviceable/defective minor parts like seal, 'O' ring, gaskit fuel pump, gear, technometer, bushing, technometer cover, fuel pump, gear housing, fuel pump gear etc and testing for smooth operation complete all as directed , after renewal of following major parts if found defected/unserviceable.
Supply only Plunger
Supply only Control rack
Removal of self starter motor from the DG Set of capacity 10 KVA to 50 KVA , strip opening the starter for the renewal of minor parts like bush gear, o ring assembly , bush set, sealing kit,including assembling and re fixing at site complete all as specified and directed.after renewal of following major parts if found defected/unserviceable
supply only Armature
supply only Solenoied switch
supply only Field Coil
Taking down old unserviceable fuel feed pump and S&F feed pump for fuel injection pump complete assy for capacity 10 KVA to 50 KVA of DG Sets.
S & F (in repairs) of fuel shut down solenoied valve kit including takingout old valve assy and making all connection testing for smooth operation in any type DG Set complete all as specified and directed by Engr-in-Charge.
M & L for 'B' check kit of DG set 10 KVA to 50 KVA
S & F ( in repairs) Radiator cap suitable for DG set of any type /make and capacity complete all as directed.
S & F (in repairs) Fuel hose flexible with matalic tape from fuel tank to filter, filter to FIP including allied nut bolt washer and coupling for DG set 10 KVA to 50 KVA with and including taking out old hose and making all connection testing for smooth operation all as directd.
S & F (in repairs ) of radiator hose pipe suitable both inlet and outlet of 10 KVA to 50 KVA DG Set with including taking out old hose and making all connection , testing for smooth operation complete all as directed .
S & F (in repairs) thermostat with new thermostat alongwith complete assy for DG set connection complete all as specified and directed.
S&F ( In repairs) RPM CABLE of any type/make of DG set complete all as specified and directed by Engr -in- Charge .
S&F ( In repairs) Water Temp Meter of any type and all as specified and directed by Engr -in- Charge .
S&F ( in repairs) OIL PRESSURE METER of any type and all as specified and directed by Engr -in- Charge .
S&F ( in repairs) OIL TEMP METER of any type and all as specified and directed by Engr -in- Charge .
S&F ( in repairs) High Cylinder Temperature (HCT) Switch of any type and size of DG Set and all as specified and directed by Engr-in-Charge.
S&F ( in repairs) Low lube oil pressure (LLOP) Switch of any type and size of DG Set and all as specified and directed by Engr-in-Charge.
M & L for taking down of existing fuel from fuel tank by any means, removing of sludge and sediments deposited inside the fuel tank by repeatedly washing by using of chemical & detergent with air compressor including rectifing of leakage if found and refixing the same in position as per direction of engineer in charge by testing all as specified and directed. cap 10 KVA to 50 KVA DG Sets.
Opening and taking out of cylinder head 10 KVA to 50 KVA capcity DG Set Renewal of inlet and exhaust valve , valve guide seats and lapping of valve machining job, pressure testing including renewal of unserviceable parts, reassembling complete testing as required complete.
S & F( in Repairs) of battery charging sets 12V DC automatic type , fixed in DG set /panel with transformer and rectifier etc including rewiring of faulty control completer all as specified and directed by Engr-in-Charge.
S & F in Repair DG set panel board by means of painting by power coated with proper fixing of nut, bolts, hinges, welding and fixing of necessary door lock set of DG sets of any capacity with handle including double key complete all as specified and directed by Engr-in-Charge.
S & F in repairs Rotating diods assembly suitable for DG set of capacity 10 KVA to 50 KVA with and including taking out old diods and making all connection testing for smooth operation complete all as specified and directed .
M & L for opening /taking out of turbo charger of DG Set of 10 KVA to 50 KVA capacity , disconnection of air supply connection pipe etc complete overhauling servicing of turbo charger renewal of turbo charger repair kit including calibration /testing of turbo charger system complete and re assembling the same fitted with DG set properly in original position checking the alignment making proper all connection testing for smooth operation complete all as directed.
Renewal of Exhaust Muffler of DG Set any type any cap and all as specified and directed by Engr-in-charge.
Renewal of Expension bellow for exhaust of DG Set any type any cap and all as specified and directed by Engr-in-charge.
M & L for carrying out complete overhauling /servicing of DG Set panel ,AMF Panel ,control panel including checking and rewiring faulty electrical circuit using 1.5 sq mm FRLS copper conductor making all concections to CTs, push button, digital volt meter , digital amp meter and renewal of LED indicator and testing for smooth operation of any cap and all as directed.
Renewal of asbestos rope of 19 mm dia around of the exhaust pipe of diesel engine any capacity complete all as specified and directed by Engr-in-Charge.
M & L for taking out old burnt winding from exhaust fan and rewinding with suitable size super enamelled copper winding wire of exhaust fan motor of any type and size and refixing the same including dismantling and all as specified and directed by Engr-in- charge.
AGGARWAL & CO (BID ID -3345677)
Mohinder Pal and Sons (BID ID -3344981)
Gurcharan Singh Enterprises (BID ID -3346585)
Jawandha Enterprises (BID ID -3347449)
SWAMI ENGINEERS (BID ID -3345134)
The Rahul Vig (BID ID -3354996)
m/s s.n. builders (BID ID -3354721)
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .