CERTAIN REPAIRS TO E/M INSTALLATION IN TECH AND DOMESTIC AREA AT 3 BRD AF STN UNDER GE (AF) MC CHANDIGARH

Amount

Taking down chowkhats or frames with shutters without taking off shutters from frame exe 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

Supply and fixing factory made UPVC door frame made of UPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (PVC) moulded door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC ultichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer in-charge.

Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. including Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Dismanting bricks tiles/cement concrete tiles or terracing tiles single layer on roofs and including removal of debris away from site to a designated point by the local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge.

Taking down existing bitumen felt (any layer) including cement mortar bedding padding and cleaning the surface and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed.

Demolition of mud phuska on roofs any thickness including mud plastering (whether full thickness removed or only a part thereof) upto mother slab and removal of debris away from site to a designated point by the local administration or a distance up to 1.5 km from site complete all as specified and directed by Engr-in-charge.

M&L Plain cement concrete type B-0 (12.5 mm graded crushed stone aggregate ) as in padding on roof laid in 40mm thick average required thickness to maintain desired slope, finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

Material and labour for cement concrete (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregate, as in roof kerb, mud stops, benching , including use and waste necessary form work including demolition of existing PCC and removal of all rubbish outside defence land upto a distance exc 1.5Km but n.exc 5Km, complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar (1:3) using WPC @ 200ML per 50Kg bag of cement on surfaces of roof and parapet, finished even & fair without using extra cement, complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-charge.

M&L for cleaning the surface before final treatment on roof as specified, applying the double layer of glass fibre mesh of 60 GSM over the roof using poly plastic fibre adhesive mix in the following manner:- (a) Making poly plastic fibre adhesive mix by adding polyplastic fibre adhesive, white cement in equal proportion and add 25% water in it to make the mixture per manufacturer instructions. (b) The double layer of fibre mesh to be spread on the roof & apply two coat of above mixture of poly plastic fibre adhesive with a roller & brush to cover the fibre mesh throughouly. (c) Process of roof lamination:- Lamination/top coat on the roof using poly plastic fibre coat with white cement & water as per manufacturer instructions. Top coat is ammonia free, w/o any harmful effects, & is flexible in nature. (d) Min thickness of the treatment shall be 2mm.

M&L for removal of paint/putty etc from the wall using mechanical means as per manufacturer instructions. Hacking of existing plastered surfaces upto 2mm. Note:- The wall treatment shall be done on hacked/new cementitious surface for proper bonding & requsite results Surface to be treated shall be passed by Engr-in-Charge. (a) Take Poly plastic fibre adhesive,white cement in equal proportion & add 25% Water in it to make the mix as per manufacturer instructions. Apply 2 coats of wall bind adhesive mixture to the wall using a roller & brush. (b) Final & top coat apply with mixing ratio of poly plastic fibre top coat & water & white cement as per manufacturer instructions. Note For ser No 13 & 14 :- The plastic fibre adhesive should have following characterstics:- (a) Resists positive hydrostatic pressure of upto 14 bars. (b) Crack filling ability upto 45 mm. (c) Temp control upto 14 degree celcious on any surface like concrete roof, metal shed & for walls also. (d) High durablity to water,fire & UV rays covering climate condition to + 55 degree celcious.

Dismantling plain or corrugated steel sheeting/fibre glass transuscent corrugated sheeting, any gauge,thickness, including Nainital or similar pattern roof covering complete all as specified and and directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15cm thickness below or above ground level complete all as specified and and directed by Engineer-in-Charge.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embeded portion and making good disturbed ground with concrete or brick work etc complete all as specified and directed by Engineer-in-Charge.

Taking down mild steel rolling shutters of any size and description complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls, etc including raking out joints, hacking for ke,y scrubbing down with water etc and removing the demolished material out side of the defence land complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

S&F for pre painted Galvalume aluminium zinc coating GI based corrugated / trapezoidal section of steel sheet 0.50mm thick of any colour (AZ-150) having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed.

S&F for pre painted Galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour (AZ-150) having tensile strength of 550Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed.

M & L for 100mm thick plain cement concrete 1:4:8 type D-2 (40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge.

M & L for 100mm thick plain cement concrete 1:2:4 type B1 (20 mm graded crushed stone aggregate) finishing surface even and smooth by brooming without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Chequered cement concrete rubber moulded coloured tiles 300mm x 300mm x 22mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed of cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles including dismantling of existing tiles and removing the debris outside the defence land complete all as specified and as directed.

M&L for Rubber moulded 80mm thick machine pressed coloured glossy finish (Red/Yellow) precast concrete interlocking paver blocks with grey cement and pigment any shape and size conforming to IS 15658-2006 M-40 grade including 25mm thick sand cushion and including dismantling of existing paver block complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class "B" bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for 10mm thick plaster in Cement Mortar 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified

M&L for 15mm thick plaster in Cement Mortar 1:4 on other than fair face of brick walls or concrete surface, finished the surface fair & even without using extra cement complete all as specified

M&L for 10mm thick plaster in Cement Mortar 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified

M&L for rendering 10mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas, roof projection, facia, fins, parapet etc and similar likes at any height including necessary scaffolding including taking down cement/lime plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L, machine cut Kota stone slab 18 to 20mm thick laid and jointed with grey cement slury mixed with pigment to match the shade of slab including rubbing and polishing as in floor including 15 mm thick screed Bed in cement mortar 1:6 complete all as specified. complete all as specified.

M&L, machine cut Kota stone slab 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of slab in skirting, dado and pillar including rubbing and polishing including rendering 10 mm thick on wall and the like to receive tile in cement mortar (1:4), complete all as specified. complete all as specified.

M&L Granite (of any type) 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall with fastener/screw also and like in 12mm thick Screed bed or bedding layer cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing and removing the debris complete all as specified and directed.

Grinding & polishing of old kota stone/marble/baorda green floor/skirting with machine in and including making good of wall finishes as per original specifications complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloured tiles 7-8 mm thick (area of each tile exceeding 0.11 Sqm but n.exc 0.18Sqm) laid in floor with neat cement slurry @ 3Kg/Sqm over and including 15mm thick screed bed in cement mortar 1:6 and including pointing in white cement with pigment to match the shade of tiles including 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded crushed stone aggregate) including dismantling existing tile complete all as specified and directed

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick in cement mortar 1:4 incl dimantling of existing tile complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C1 using 40mm graded crushed stone aggregate as in plinth protection without using extra cement complete all as specified and directed by Engineer-in-Charge.

Dismantling fencing wiremesh, any type in any position and separating them the serviceable materials and removing the unserviceable wiremesh from work site as directed.

Excavating in post holes in Soft/loose soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified.

M&L for cement concrete Type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) for post, struts (including caps) including weathering, slightly rounded or chamfered angles and throating and including necessary form work all as specified and directed

S & F for 10mm dia MS round bar for tighting/securing fencing wire etc,including two coats of synthetic enamel mpaint over a coat of red oxide all as specified and directed

S&F plates (plain or chequred) channels, square cut or nottched (ordinary and counter sunk) forming holes, without any attachment Fe-410W (gde-E-250) quality B all as specified and directed

S&F hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding n concrete and screwing etc winf tiles for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

S&F Roof trusses (framed), trussed, purlins, crane gantires, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats including post etc conforming to Fe-410-W (Gde E-250) quality B complete all as specified and directed by Engineer-in-Charge.

S&F for fabric fencing mesh of size 100mm x 100mm made of GI wire of dia 3mm, PVC coated to achieve outer dia not less than 4mm in required colour and shade fixed in posts with nut and bolts, drilling holes, notching for wire, flat iron filets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting to existing steel or new steel posts all as specified and directed.

S&F 1.00mm thick steel rolling shutters without ball bearing of push pull or manual type as specified, including top cover, anchoring rod, hasp & staple and one shop coat of primer and two coats of synthetic enamel paint; erected in position as indicated complete all as specified and as directed by Engineer-in-Charge

S&F 1.25 mm thick steel rolling shutters without ball bearing or gear operated type with bevel gear box and crank handle as specified, including top cover, anchoring rod, hasp & staple and one shop coat of primer and two coats of synthetic enamel paint; erected in position as indicated complete all as specified and as directed by Engineer-in-Charge.

M&L Overhauling, servicing and realignment of rolling shutters of area not exc 12 sqm including replacement of defective bearing and grinding of wheels for smooth movement of doors, replacement of clamps, bolts etc including cleaning, oiling and greasing of moveable parts and welding work complete all as specified and as directed by Engineer-in-Charge.

S&F 5 mm thick float glass, tinted/smoked shade fixed to frame for door/window/partition etc including aluminium powder coated snap beading and rubber gasket complete all as specified and directed by Engineer-in-Charge.

S&F 4mm thick float glass, tinted/smoked shade fixed to aluminium door/ windows and iron frame including aluminium powder coated snap beading and rubber gasket complete all as specified and directed by Engineer-in-Charge.

S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed

S&F for Aluminum (extruded section) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S&F 180 mm size Powder coated(any tint) aluminium "American Handle" fixed to aluminium door with suitable screws complete all as specified and directed by Engineer-in-Charge.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) white colour three layers hoisted and fixed in position including GI tank nipple etc. complete and all as specified and as directed by Engineer-in-Charge. including dismantling existing water tank and removing from site of any capacity.

Supply and fixing in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) white colour three layers hoisted and fixed in position including GI tank nipple etc. complete and all as specified and as directed by Engineer-in-Charge including dismantling existing water tank and removing from site of any capacity.

Disconnecting existing tanks not exc 500 ltr capacity setting a side or lowering if required and cleaning and removing all seal and dust it from mouth of circulating of pipe etc , the tank shall be cleaned and rinsed twice with 5%detergent solution and refixing tank at its original position and make leak proof complete as directed.

Disconnecting existing tanks exc 500 ltr but n.exc 1000 ltr capacity setting a side or lowering if required and cleaning and removing all seal and dust it from mouth of circulating of pipe etc , the tank shall be cleaned and rinsed twice with 5%detergent solution and refixing tank at its original position and make leak proof complete as directed.

M&L for 15mm bore 'medium grade' GI tubing with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

M&L for 20mm bore 'medium grade' GI tubing with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F 15 mm bore stop valve, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP fancy type bib taps 15mm bore, cast copper alloy with capstan handle, screwed down, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Treating soil along the external wall below concrete or masonry apron using chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

Treatment of soil under existing floors using chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.

Treating the soil under plinth protection at the rate of 5 litres of chemical emulsion (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) per square metre of surface area, complete all as specified and directed.

Treating at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) (Chlorophyriphos 20 EC conforming to IS 8944 or Imidacloprid 30.50 SC conforming to IS 16131 (Refer Table 1 on Sl. Page No. 2 of IS 6313 (Part 2) : 2013)) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed.

M&L for for preparation of new plastered/unplastered/ concrete surfaces of walls and applying two coats of exterior emulsion paint (in camouflage pattern using number of colours) over and including one coat of primer and at any height including necessary scaffolding etc complete all as specified. Note : Pattern of camouflage shall be approved by GE.

M&L preparation of old/new plaster surfaces and applying two coat of oil bound distemper white or tinted complete, all as specified and directed by Engr-in-Charge

M&L for Servicing of split type AC of capacity upto 2.0 TR of any make by washing the outdoor unit, condenser coil with soap water jet followed by clean water jet and indoor unit with the help of Service Cover Bag with Drain Outlet Ac Service Wash Bag Cover Jacket, wipe and clean the unit with dry cloth complete all as specified and directed by Engg-in-Charge. (a) Cost of hiring T&P i.e. blower, pressure pump, bucket, hose pipe, cloth. Dismantling /taking down and re-installation of unit on wall if not possible on existing fitting, transport deemed to be included in above rate. (b) Servicing will be done without damaging electric connection/AC parts and testing and commissioning complete all as specified and directed.

Servicing of window type AC of cap 1.5 /2.0 TR of any make, taking out the AC from outer cover and washing the unit with soap solution jet followed by clean water jet, drying wiping complete all as specified and directed. Note:- (a) Cost of hiring T&P i.e. blower, pressure pump, bucket, hose pipe, cloth. Dismantling /taking down and re-installation of unit on wall, transport deemed to be included in above rate. (b) Servicing will be done without damaging electric connection/AC parts and testing, commissioning complete.

Taking out the unserviceable old perished insulated foam from the gas circulating tubes of the split type air conditioner of different capacity upto 1.5/2.0 ton and supply and fix the new insulated foam over the supply tubes upto the condensing outdoor unit neatly tying the felt ends with PVC insulating tape complete all as specified and directed by Engg-In -Charge.Note -if gas leakage occur during fixing of insulated foam ,then gas filling will be done free of cost by contractor .

Disconnecting and taking down the following unserviceable hermatic compressor and supply and fixing new compressor, hermetically sealed unit including cutting brazing pressure testing and refilling suitable refrigerant to desrie level to obtain adequate cooling etc complete all as specified and directed by Engr-in-Charge.

Split/window type AC 1.5 Ton capacity

Split/window type AC 2 Ton capacity

Water cooler storage type 40/80Ltrs capacity

Disconnecting and taking down the following unserviceable rotory compressor and supply and fixing new compressor, hermetically sealed unit including cutting brazing pressure testing and refilling suitable refrigerant to desire level to obtain adequate cooling etc complete all as specified and directed by Engr-in-Charge.

Split/window type AC 1.5 Ton capacity

Split/window type AC 2 Ton capacity

Water cooler storage type 40/80Ltrs capacity

Refrigerator 165 to 190Ltrs capacity

Refrigerator 300 to 320Ltrs capacity

Supply, installation in replacement of copper tubing superior quality of dia 5/8" (min thickness 0.70mm) including necessary brazing, jointing, clamping/saddles and fix with walls complete all as specified and directed

Supply, installation in replacement of copper tubing superior quality of dia 1/2"(min thickness 0.70mm) including necessary brazing ,jointing, clamping /saddles and fix with walls complete all as specified and directed by Engr-in-Charge.

Supply, installation in replacement of copper tubing superior quality of dia 3/8"(min thickness 0.70mm) including necessary brazing, jointing, clamping/saddles etc and fixing with walls complete all as specified and directed

Supply, installation in replacement of copper tubing superior quality of dia 1/4"(min thickness 0.70mm) including necessary brazing ,jointing, clamping/saddles and fixing with walls complete all as specified and directed by Engr-in Charge.

Taking down defective blade of blower motor & Supply and fixing of new blade for blower outdoor motor of split AC suitable for any make and capacity complete all as specified and directed.

Taking down the unserviceable PCB control unit of the Split Type inverter/non inverter AC 1.5 Ton/2.0 Ton and supply and fix new PCB control unit and connecting with electrical connections and testing complete all as specified and directed for the following capacities:-

1.5 Ton capacity

2 Ton capacity

M&L for Taking down the unserviceable capacitors and supply and fix new capacitors of split type/Window Air conditioner and connecting with electrical connection complete all as specified for the following capacities:-

Starting Capacitor 80-100MFD capacity Make:Epcos/Unistar/Seimen

Starting Capacitor 100-120MFD capacity Make:Epcos/Unistar/Seimen

Running Capacitor 36MFD capacity Make:Epcos/Unistar/Seimen

Running Capacitor 45MFD capacity Make:Epcos/Unistar/Seimen

Running Capacitor 50MFD capacity Make:Epcos/Unistar/Seimen

Capacitor 4MFD 230Volts Make:Epcos/Unistar/Seimen

M&L for Disconnecting and taking down the unserviceable outdoor burn out fan motor of split type AC 1.5 Ton/2.00 Ton outdoor motor of any make and replaced by new fan motor of same capacity/specification/ make fixing and testing complete all as specified and directed.

M&L for Disconnecting and taking down the unserviceable indoor burn out fan motor of split type AC 1.5 Ton/2.00 Ton indoor motor of any make and replaced by new fan motor of same capacity/specification/ make fixing and testing complete all as specified and directed.

Taking out unserviceable condenser fan blades aluminum/ fiber/PVC heavy duty and supply and fix new blade aluminum /fiber/PVC for the window type AC upto the capacity of 2.0 Ton complete all as specified and directed by Engr-in-Charge.

M&L for checking leakages with creating vacuum with dry nitrogen gas for split type/Window air conditioner of 1.5 Ton to 2.0 Ton capacity, including filling suitable refrigernat to desire level to obtain adequate cooling complete all as specified and directed.

Taking out unserviceable remote control unit of the split type/Window Air Conditioner 1.5/2.0 TR and supply and fix new remote control unit of same make with 02 Nos batteries complete all as specified and directed.

Dismantling and transporting split type AC complete with indoor/ outdoor unit with copper piping etc of capacity 1.5/2 TR from MES store/other installed location transporting to the required location within AF station and installing the unit at site including inter connecting pipes, insulation etc checking for leakage, vacuumisation, testing and commissioning and toping up suitable refrigernat complete all as specified and directed by Engr-in-Charge.

Taking out the unserviceable air filter and supply and fix new air filter, cleanable, indigenous of suitable size for split type air conditioner upto the capacity of 2.0 Ton complete all as specified and directed by Engr-In -Charge.

Supply and fixing of pre fabricated angle iron brackets (outdoor stand) for mounting outdoor unit of split type AC's of 1.5 & 2.0 TR complete all as specified directed by Engg in charge.

Supply and fixing drain pipe 15 mm size, flexible type for connections from indoor unit to drain out the condenser water including fixing clamps/saddles etc to fix on walls complete all as specified and directed

S&F in replacement of defective outdoor sealed unit of split type AC of capacity 2TR 5 Star rated comprises of copper condenser, condenser motor, fan, blade, compressor, capacitor, suction, discharge valve, wiring kit outer cover duly power coated complete all as specified and directed Make: Daikin/O General/MITSUBISHI Note : Unserviceable unit will be deposited to MES store

S&F in replacement of defective outdoor sealed unit of split type AC of capacity 1.5 TR 5 Star rated comprises of copper condenser, condenser motor, fan and blade, compressor, capacitor, suction, discharge valve, wiring kit, outer cover duly power coated complete all as specified and directed. MakeDaikin/O General/MITSUBISHI Note : Unserviceable unit will be deposited to MES store)

S&F in replacement of defective indoor sealed unit of split type AC of capacity 2TR 5 Star rated comprises of PCB, filters complete all as specified and directed. Make Daikin/O General/MITSUBISHI (Note : Unserviceable unit will be deposited to MES store)

S&F in replacement of defective indoor sealed unit of split type AC of capacity 1.5 TR 5 Star rated comprises of PCB, filters complete all as specified and directed.Daikin/O General/MITSUBISHI (Note : Unserviceable unit will be deposited to MES store)

Supply and fixing window type sealed AC kit 1.5 TR 5 Star rated complete with cooling and condensing coil, blower motor, compressor , and electrical accessories including with all relevant accessories and adequate eco friendly refigerant complete all as specified directed (Make: Daikin/O General/MITSUBISHI

Supply & fixing in replacement of the following spares/parts for split /window type AC unit capacity 1.5 Ton & 2 Ton complete all as directed.

Starting relay Make:Renutral/Unominda/Novatek

Over Load Protector Make:Renutral/Schneider/Amico

Thermostate switch Make:Donfos/Indofos/Honeywell

Blower motor double shaft for Window AC unit as per existing make.

Reverse Heating System kit in existing AC

Liquid line stainer

Contactor for AC of suitable capacity

S&F in replacement of the following items of existing make and model suitable for water cooler any capacity including taking out old /unserviceable spares/parts complete all as directed :-

Over Load Protector 40/80 Ltrs capacity Make:Renutral/Schneider/Amico

Over Load Protector 150 Ltrs capacity. Make:Renutral/Schneider/Amico

Liquid line stainer any Capacity.

Blade only for condensor motor any capacity

Starting relay Kit 40/80 Ltrs capacity. Make:Renutral/Unominda/Novatek

Starting relay Kit 150 Ltrs capacity. Make:Renutral/Unominda/Novatek

Thermostate switch any capacity. Make:Donfos/Indofos/Honeywell

Starting Capacitor 40-60MFD 230Volts. Make:Epcos/Unistar/Seimen

Running Capacitor 10MFD 230Volts. Make:Epcos/Unistar/Seimen

Running Capacitor 20MFD 230Volts. Make:Epcos/Unistar/Seimen

Condensor motor

Magnetic Rubber gasket for top cover any cpapcity.

PVC Drain pipe 32mm bore not less than 1 metre in length.

Material and labour for complete Internal wiring for AC of any capacity with single core copper conductor FRLS cable as per existing size only including taking down old wiring complete all as directed.

S&F in replacement of Swing Motor of AC any Capacity

Taking out the unserviceable/defective push/lifting cock and supply and fix new chromium plated push/lifting cock 15 mm dia heavy duty for water coolers up to the capacity of 150 liters complete all as specified and directed.

Supply & filling/charging of suitable refrigerant as per existing to desired level for any make and model suitable to the following equipment including detection of gas leakage, brazing and welding etc.to the entire satisfaction of Engr-in-Charge

Split type AC 1.5 Ton capacity

Split type AC 2 Ton capacity

Water cooler storage type 40/80Ltrs capacity

Water cooler storage type 150 Ltrs capacity

Refrigerator 165 to 190Ltrs capacity

Refrigerator 300 to 320Ltrs capacity

S&F in replacement of desert cooler fabricated made out of GI sheet 18 SWG for tank and 20 SWG for body with 3 Nos of moveable shutters with PVC grill including accessories like as 450mm copper wound fan motor, copper wound submersible pump, wiring, switches etc complete electric driven (single phase), having nominal air flow capacity 5000 Cum per hour including angle iron stand made of 25mmx25mmx5mm upto 1.5 Mtr height for desert cooler with duly painted one coat of anti corrosion red oxide primer and two coat of synthetic enameled duco paint (make berger) complete all as specified and directed. Make of Motor: CG /Bajaj/Symphony Note:- Unsv cooler will be deposited to MES store yard.

Taking down carefully the following defective accessories /parts from existing desert cooler and supply and fixing of new acessories in place of defective desert cooler as given below complete all as directed :-

S&F Fan motor 180Watts 230Volts 3 Speed copper winding single phase with blade complete as per existing make.

S&F Submersible type tulu pump 230Volts single phase 1750LPH at 1.5 mtr head complete.

S&F Fan blade of existing size

S&F Slector switch type regulator 4way single phase 230volts.

S&F Switch piano type 5 Amp , single pole 230 vollts.

S&F Front grill of M S /PVC complete with slides operation and indicator lamps.

S&F Wood wool pad set of three of best quality including fixed wth bamboo stick any size.

S&F PVC pipe heavy duty 15mm bore ISI Marked.

S&F PVC DistributionTee, Elbows and other minor items (heavy duty) 15mm bore ISI Marked

Material and labour for complete Internal wiring for desert cooler of any capacity with single core copper conductor FRLS cable as per existing size only including taking down old wiring complete all as directed.

Taking down to desert cooler of any make/capacity carefully without damaging, scraping old paint, completely and painted with 2 coats of synthetic enamel paint over a coat of red oxide primer after filling the cavities of MS Sheet with filler to external surface and inner surface of bottom & sides painted with 2 - coat of black Japan paint completed all as directed. Note : Taking down and re-fixing in the same position after painting work shall be deemed to include in the unit rate of this item.

S&F in replacement the following items of existing make and model suitable for refrigerator 165-320 capacity including taking out old /unserviceable spares / parts complete all as specified and directed.

Starting Relay Box 165 - 180Ltrs. capacity. Make:Renutral/Unominda/Novatek

Overload Protection Box 165 - 180Ltrs. capacity. Make:Renutral/Unominda/Novatek

Starting Relay Box 300 - 320Ltrs. capacity.

Overload Protection Box 300 - 320Ltrs. capacity.

Running Capacitor 10MFD 230volts.

Thermostate switch any cpacity.

Vegetable Tray with glass cover165 - 180Ltrs. capacity.

Vegetable Tray with glass cover 300 - 320Ltrs. capacity.

Rubber door gasket magnetic type 300 - 320Ltrs. capacity.

Capillary tubes copper 1/60"

Liquid line stainer

Material and labour for complete Internal wiring for refrigerator of any capacity with single core copper conductor FRLS cable as per existing size only including taking down old wiring complete all as directed.

Material and labour for dismantling of PCB from split/window AC for repairing PCB defected parts like transistors, fuses, resistors, and capacitors etc of both inverter and non inverter model to made it functional by sending to the trained professional for rectification and same to be fixed after rectification complete all as specified and directed.

Note :- Amount of credit of Rs. 21050.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/s APEX ENTERPRISES (BID ID -3443380)