Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹75,000
Closing Date
24 Mar 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
Chikkanna M N
Providing 125 KVA DG Set toSri Malai Mahadeshwara Statue at M.M. Hills, Chamarajanagara District
PWD/2024-25/EL/WORK_INDENT20136
PWD/2024-25/EL/WORK_INDENT20136
Open
Electrical
Two Tender Document System(Two Cover)
PWD Electrical Division Office Bengaluru
7 documents required · 7 mandatory
3.2To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. from 2019-20 to 2023-24 c) Executed in any one year during last five years the following minimum quantities of work. 1) SITC of 125KVA / 62.5 KVA DG Set with AMF Panel - 2 Nos
3.2To qualify for award of this contract, each tenderer in its name should have in the last Five years i.e. 2019-20 to 2023-24. b) Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar work i.e., SITC of 125KVA / 62.5 KVA DG Set and connected Work in total of Value not less than: Rs.18.59 Lakhs in a single work.
The tenderer as a Prime Contractor having valid Class-2 & above Electrical License issued by Electrical Inspectorate Govt of Karnataka and should have suitable technical, financial & managerial capabilities.
The Tenderer must submit ongoing and existing commitments details separately.
3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under/ Assessed available tender capacity - (AxNx2.5 - B ) Where, A-Maximum value of construction works executed in any one year during the last five years (updated 2024-25 price level) taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. (03 Months) B - Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next. (03 Months) (period of completion of the works for which Tenders are invited) Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
3.3Each Tenderer should further demonstrate: (b) liquid assets and /or availability of credit facilities of not less than Rs.11.16 Lakhs (For Particular work only) (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period).
3.2To qualify for award of this contract each Tenderer in its name should have during last five years ie from 2019-20 to 2023-24 a) The tenders must have achieved in at least two financial years an average annual financial turnover of an amount Not less than Rs.37.18 Lakhs during last five years. with UDIN Number certified by Chartered Accountant, If Failed to Satisfy the condition tender will be rejected Note: The returns submitted to the I.T. along with the Profit and Loss account statement, Balance sheet should be uploaded for the financial turnover criteria
Nil
Nil
Nil
Nil
Nil
₹930
₹75,000
15 Mar 2025
15 Mar 2025
25 Mar 2025
19 Mar 2025
Providing 125 KVA DG Set toSri Malai Mahadeshwara Statue at M.M. Hills, Chamarajanagara District
ELECTRIC GENERATING SET:- 100KW/125KVA SILENT Electric Generating Set with CPCB IV+ approved acoustic enclosure comprising of Radiator Cooled, Diesel engine developing 161.6 BHP at 1500 RPM, complete ...
Providing, Laying and Jointing Cast Iron (CI) double flanged pipes true to line / hoisting of DI flanged pipe in position and aligning to correct plumb, including cost of jointing materials, conveying...
Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering & levelling the ground for all works other than foundation & depth in Ordinary rock and soft rock...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitr ed, welded and grinded finish, wi...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75x150...
Supplying . amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which a...
Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...
Supplying and Fixing of shunt tripsuitable for MCCB.CBCT. (Vol-6 P.No 17/5.16) Excluding of GST 18 Percent ---- including cost and conveyance of all materials, labour and other incidental charges nece...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (Vol-6 P.No 19/5.38) Excluding of GST 18 Percent ---- including cost and co...
Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) ( Vol-6 P.No 15/5.11.6 )400Amps Excluding of GST 18 Percent ---- including cost and conveyance o...
Fixing of . Amps TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labeling. (Vol-6 P.No 57/13.18.6) 300A to 4...
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. (Vol-6 P.No 19/5.34) Excluding of GST 18 Percent ---- including cost and conveyance of...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 (ESCOM ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable (ESCOM Vol-6 P.No 52/176/21.07) 120 to 240 Sqmm Excludi...
Earth work excavation by manual means for drains,canals, waste weir draft,approach channels, key trench, foundation of Bridges and such similar works,as per drawing and technical specifications, inclu...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Aluminium End Terminal Lug 300 Sqmm (ESCOM Vol-6P.No 27/481/60.13) Excluding of GST 18 Percent ---- including cost and conveyance of all materials, labour and other incidental charges necessary for th...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
GI/Copper strips for grounding connections, using necessary fixing materials as required. (Vol-6 P.No 60/25 x 6 mm GI strip) Excluding of GST 18 Percent ---- including cost and conveyance of all mater...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
LIST OF RECOMMENDED MAKES OF ELECTRICAL MATERIALS TO BE USED IN THE PROJECT (3).doc
Others - List of Makes • 0.07 MB
kppp 20136 kw-2 bid.docx
Tender Document • 0.91 MB
government notification bc loc letter to be issued by the bank (1)(1).pdf
Others - Bankers Certificate format • 1.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .