SPL REPAIR TO BLDG NO. P-16/02 AND 14/04 NALWA ROAD (OFFICERS MD ACCN) AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Demolition Cement Concrete (un-reinforced) of any description in any position not otherwise specifically provided for, complete all as specified and as directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Material and labour Brick Work with fly ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

All as per Srl item No. 3.00 here-in-before but except bricks

Material and labour for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls in CM 1:4 complete all as specified

Taking down Chowkat or Frame (without taking off shutter from the frame) not exc. 1.50 Sqm Each, complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but not exc 4.00 Sqm Each, complete all as specified and as directed.

Refixing of shutters including taking down of any description exc 1.00 and n exc 2 Sqm each in same opening complete all as specified and directed.

Refixing of shutters including taking down of any description exc 2 Sqm each in same opening complete all as specified and directed.

Supply and fixing factory made flush shutters, 35mm thick, solid core construction with block board core & ply wood face panels, commercial type on both side incl 35 x 6mm thick 2nd class HW lipping on edge, complete all as specified and directed

Supply and fixing factory made 2nd Class softwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats, complete all as specified and directed

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed

Supply and fixing factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed.

Supply and fixing 5mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required and including fixed black film on glass surface complete all as specified and directed

Supply and fixing SS curtain rail of 25mm dia of 22 gauge thick complete all as specified and as directed

Supply and fixing in repair, End Stopper, Decorative type and Fixing Brackets for the Drapery Rod 25 mm dia. (One Set comprises of 2 No. of Decorative type End Stopper 2 No. of Fixing Brackets) complete all as specified and as directed

Supply and fixing 200 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing in repair of 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing 150mm aluminium handles, cast type, anodised complete all as specified and as directed.

Supply and fixing 100mm size mild steel butt hinge medium weight all as specified.

Supply and fixing 75mm size aluminium alloy anodised butt hinges all as specified and directed.

Supply and fixing 300mm brass ordinary rat tail pattern springs incl roller plate complete as specified.

Supply and fixing aluminium sliding door bolts 300mm,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body & tongue of size 75mm, anodised with hard drawn spring, fixed in door, complete all as specified and directed

Supply and fixing in repair floor door stopper of aluminium alloy body & tongue of size75 mm, anodised with hard drawn spring, fixed in door, complete all as specified and directed

Supply and fixing stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over coat of pink primer on newly wooden surfaces of any description not otherwise described over 10 Cm width or girth complete all as specified and directed

Material and labour for preparation of old painted surface of wooden and applying one coats of synthetic enamel paint of any description not otherwise described over 10 Cm width or girth complete all as specified and directed

Material and labour for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed

Material and labour for preparation of old painted surface of steel and applying one coats of synthetic enamel paint, complete all as specified and directed

Supply and fixing in repair factory made built-in steel cup board with pressed steel frame of size 75 mm x 50 mm x 1.25mm thick with pressed steel shutter 1.25mm thick fixed to masonry wall by hold fasts, made out of 25x3mm flat iron including MS hanging rod of 10mm dia with brackets fixed on inner side of one leaf of shutter and on other leaf provn of MS peg set 3 pegs including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surfaces of frame and shutter and fixing in PCC (1:2:4) all as directed and shown on Drg No CEJZ / TD / 20 / 11 sheet 1/5 to 5/5 dt 01.08.11, complete all as specified and directed. Make : Godrej, Durian or equivalent as approved by GE

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing rubbish off the premises, complete all as specified and as directed.

Material and labour for non-skid ceramic colour tiles 400x400, 7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed with white or coloured to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed

Material and labour for cloured glazed ceramic tiles in vertical surface 450x 300x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles over and incld.10mm thick screed plaster in CM 1:4, complete all as specified and directed

Material and labour for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed

Material and labour for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed plaster 10 mm thick in CM (1:4) complete all as specified and directed

Material and labour for marble work 18 to 20mm thick of any shade other than white and black (table rubbed and polished) in steps, riser, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified

Material and labour for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture match with shade of granite and including screed bed/plaster layer 15 mm thick in CM (1:6) complete all as specified and directed

Taking down Cement Plaster of any description on brick walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc., complete all as specified and as directed.

Material and labour for Rendering 12mm thick in cement mortar 1:6 on INTERNAL fair faces of Brick walls or on concrete surfaces, finished smooth and even, complete all as specified and as directed.

Material and labour for 15mm thick rendering in Cement Mortar 1:4 on External Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even, complete all as specified and as directed

Material and labour for Rendering 5mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc., plastered surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.

Material and labour for preparation of new plastered surface of wall and applying two Exterior Acrylic Emulsion paint over a coat of alkali resistant primer, complete all as specified and directed.

Material and labour for complete removal of existing treatment of old plastered surface of wall and applying two Exterior Acrylic Emulsion paint, complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall putty, all as specified & directed

Material and labour for complete removal of existing treatment of old plastered surface of wall and applying two coat of Acrylic washable distemper over a coat of 1mm average thick wall putty white cement base (J K & Birla) and making smooth finish, complete all as specified & directed

Material and labour for preparation of old plastered Surfaces of ceiling and applying one Coats of White Wash complete all as specified and directed.

Material and labour preparing newly Plastered Surfaces of Ceiling and applying two coats of White Wash, complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed

Material and labour for preparation of old decorated plastered or unplastered surfaces and apply one coat of white wash on walls including cornices etc all as specified and directed

Supply and fixing Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete as specified of size 125x60mm complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for cement concrete 1:3:6, Type-C-1 (20mm graded stone aggregate) as in filling in steel frame/roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering complete all as specified

Demolition of mud in roofs any thickness all as specified

Material and labour for wire brushing and cleaning top surface of cement concrete, including flashing and junction of parapets etc complete all as specified

Material and labour for brushing neat cement slurry with 3 kg of cement per sqm complete all as specified

Material and labour for cement concrete in foundations, filling and mass concrete 1:2:4 type C-0 using 12.5 mm graded stone aggregate as in roof padding 50mm thick in average complete all as specified and directed

Material and labour for 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc all as specified and directed

Supply and applying high built elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/brush applied, membrane with an elongation of 280% and tensile strength of 2.7 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1: (resin; harder) application with 100% water dilution and pure polyurethane application in 2 coats with a total min consumption of 1.25 kg per Sqm. Application should be done with Graco sprauer by a company autorised applicator complete all as specified and directed. Make : STP/ Sika/ Berger

Demolition of cement concrete (unreinforced) exc 15cm thickness above ground floors, complete all as specified and directed.

Material and labour for 15mm thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick, finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. Note:- WPC measured separately

Supply only integral water proofing compound, complete all as specified and directed

Demolition of cement concrete in ground floor and paving/as in sunken portion (below or above ground level) all as specified

Material and labour for cement concrete 1:5:10 type E - 2 (using 40 mm graded brick aggregate) as in sunken flooring complete all as specified and directed

Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WCs etc shall be as under:- (a) The top surface of the sunken RCC slab shall be laid with cross slope as indicated in drgs towards the spouts. The min thickness of the RCC slab shall be as specified in drg. (b) PCC 1:1.5:3 fillets at corners with 12.5mm graded aggregate shall be provided. (c) Plastering in CM (1:3) 15mm thick with WPC on walls as well as on sunken floor finished even and smooth using extra cement. (d) GI Pipe 40mm dia medium grade be inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe upto two storey construction and 25cm beyond two storey construction.

(e) After doing the plaster, testing be carried out by ponding (for 72 hrs) the sunken portion before further treatment to the sunken slabs. Any leakage/seepage observed shall be rectified before carrying out water proofing treatment. (f) Two component Acrylic modified Cementitious coating:- (i) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coating and achieve a gripping profile that is clean, dry and free from laitance and dry other form of surface contamination. The installation instructions in manufacture's published literature should be strictly complied with, including but not limited to the following:- (ii) Chipping out any visible cracks in "V-Groove" pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/Dr Fixit 302 SBR latex/ Perma latex SBR/FOSROC Nitabond SBR latex/Asian paint latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required. (iii) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating of sika Top Seal-107/Brush Bond FOSROC/Dr Fixit/STP/CICO.

(iv) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified cementitious coating of SIKA Top Seal-107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions. (v) Apply glass fabric sheet of SIKA Fab 1/FOSROC/Dr Fixit/STP whilst the first coat is wet. (vi) Once touch dry, apply second coat of Acrylic modified cementitious coating of SIKA Top Seal -107 /Brush Bond FOSROC/Dr Fixit/STP/CICO of viscosity as per manufacturer's instructions on the entire area. (vii) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (viii) The waterproofing coating should be taken to a height minimum 300mm above the finished floor level on the vertical surfaces. (ix) It is essential to cure Acrylic modified cementitious coating immediately after application (minimum 6-8hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking. (x) A protection plaster 12-15mm thick) in CM 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645.

Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with SIKA Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture: SIKA Plastocrete Plus/FOSROC/DR Fixit/STP/CICO conforming to IS 2645. (xi) All the corners and joints should be pre-treated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of Make SIKA Seal Tape/FOSROC/Dr Fixit/STP. (xii) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations. (xiii) Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturer's and approved by GE. (g) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (h) All CI traps in sunken slab to be enclosed with PCC 1:1.5:3 (Min 15cm) all around.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Material and labour for 15mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed

Material and labour for 20mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors

Material and labour for cutting chases, pinning in making good to facing where required for concealed water tubing or concealed conduit wiring and making good in CM 1:3, cutting not exc 10cm girth etc on brick walls complete all as specified and directed

Supply and fixing in repairs 15mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe in repairs complete all as specified and directed

Supply and fixing in repair Centre Hole Basin Mixer with popup waste with 450mm long of approved make suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repair Concealed Stop Cock with Adjustable Wall Flange of approved MAKE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated fancy type screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed

Supply and fixing in repair Wall Mixer 3-in-1 with provision for both Over Head Shower and Hand Shower complete with 115mm long bend Pipe, connecting legs & wall flange of approved MAKE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repair Single lever Sink mixer swinging spout (Wall mounted) with connecting legs & wall flanges of approved MAKE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repair Over Head Shower 140mm round shape multi flow with air effect(ABS body & face plate chrome plated) with rubit cleaning system of approved MAKE suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repair Hand Shower 105mm round shape multi flow with air effect(ABS body & face plate chrome plated) with rubit cleaning system as approved suitable for fixing to 15mm bore (dia) GI Pipe, complete as all specified and as directed.

Supply and fixing in repair Brass Chromium plated Shower Rose 125mm size, with or without Swivel Joints, and fixing to Steel Pipe or Union, complete all as specified and as directed.

Supply and fixing in repair, Towel Rack with Lower Hanger as approved fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.

Supply and fixing in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

Supply and fixing in repair hand shower (health faucet) with 8mm dia, 1.2 mtr long flexible tube & wall hook of approved MAKE, suitable for 15mm dia for iron pipe or for brass ferrule all as specified & directed

Supply and fixing in repair CP jet spray with holder for EWC,1.5m long, complete all as specified and directed.

Supply and fixing in repair PVC connection, heavy duty15 mm bore, 45 cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed

Supply and fixing in repair new flxible PVC waste pipe of approved quality 32 mm bore, 75 cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed

Supply and fixing in repair, Coloured PVC Toilet Cabinet of size 450x450x90mm with Looking Mirror (as approved) fixing with Chromium plated Brass Screws and Wooden/Plastic Cleats, complete as all specified and as directed.

Supply and fixing in repair, Sheet Glass Shelf Assembly, consisting of 5.5mm thick Sheet Glass Shelf 12 Cm Wide with Chromium plated Bracket Guard and Railing 60 Cm long, complete all as specified and as directed.

Supply and fixing in repair Corner glass shelf (with bracket) of approved MAKE, complete all as specified and as directed

Supply and fixing in repair Soap Dish holder of approved MAKE complete all as specified and directed.

Supply and fixing in repair Toilet roll holder with flap of approved MAKE complete all as specified and directed.

Supply and fixing Vitreous China White Wash Down Water Closet Pan with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /disturbed surfaces including dismantling the existing Old Unserviceable Water Closet complete all as specified and as directed

Supply and fixing in repair, White Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device, complete all as specified and as directed.

Supply and fixing Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan including provision of Lime Concrete Bedding and Making Good to Floor/disturbed surfaces and fixed-in-repairs, complete all as specified and as directed

Supply and fixing PVC Flushing Cistern 10 LITRE capacity White, Low Level, Valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing Old Unserviceable Cistern complete all as specified and as directed.

Supply and fixing Vitreous China Wash Hand Basin of size 550x400mm (Flat Back or Angle Back type) with full pedestal including 32mm bore (dia) Brass Chromium plated Waste Fitting, a pair of Cast Iron Bracket duly painted / Erecting Stand including cutting and pinning in Ends Making Good disturbed Surfaces in Cement Mortar 1:3 including dismantling the existing Old Unserviceable Wash Basin complete all as specified and as directed.

Supply and fixing in repair, Stainless Steel Sink with Drainage Board 1.0mm thick Overall size 915x460mm and double Bowl size 410x330x160mm for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Brass Chromium Plated, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

Disconnecting existing tanks exc 250 but n. exc 500ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Supply and fixing rotational moulded synthetic (HDPE), water storage tank 1000 litre capacity (cylindrical vertical with closed top,) hoisted & fixed in position all as specified in SSR Part-I, including dismantling of existing water tank, complete all as specified & directed.

Supply and fixing chromium plated grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed

Dismantling of cast iron drain pipe jointed with cement mortar/lead joint and taking out from wall/floor if reqd 75/100mm complete all as specified and directed

Supply and fixing 110 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed.

Supply and fixing 75 mm bore PVC pipes single socketed in any length with rubber ring joints fixed to walls or laid in floor, complete all as specified and directed

Supply and fixing 110 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

Supply and fixing 75 mm dia PVC (SWR ) bends any radius complete all as specified and as directed.

Supply and fixing 110 mm dia PVC (SWR ) branches piece, double (double Y) equal or unequal with rubber rings joist fixed to walls complete all as specified and as directed

Supply and fixing 75 mm dia PVC (SWR ) branches piece, double (double Y) equal or unequal with rubber rings joist fixed to walls complete all as specified and as directed

Supply and fixing 110 mm dia PVC (SWR ) junction single, (Single T) equal or unequal with rubber rings joist fixed to walls complete all as specified and as directed

Supply and fixing 75mm dia PVC (SWR ) junction single, (Single T) equal or unequal with rubber rings joist fixed to walls complete all as specified and as directed

Supply and fixing 75mm dia PVC (SWR ) vent cowl complete all as specified and as directed.

Material and labour 75mm PVC (SWR) PVC (SWR) floor/nahani trap, plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.

Supply and fixing in repair Stainless steel pipe railing of 50mm dia meters in horizontal and 25mm dia stainless steel pipe in vertical at at a distance 25cm between step to step , all welded together, vend to shape as directed and fixing both ends in floor complete all as specified and directed.

Supply and fixing factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors & Cabinets

Supply and fixing factory Made 18mm thick 100% Solid WPC (Wood polymer Composite) One side Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm manufactured by Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer-In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen/Balcony Doors and Cabinets

Supply, Fixing and installation of wall mounted Electric Kitchen Chimney of size 75 cm, compact design suction 1400m3/hr Auto clean type touch control with wave sensor duct dia 150mm including free Kit for installation with duct cover of adequate size ,kutchina and equivalent make as approved by GE.

Supply and fixing auto hinges for cabinet case complete all as specified and directed (Make ; KARF/HETICH)

Supply and fixing stainless steel plain basket of size 15”x18”x4” (Make: Everlite/ Slimline/Peacock/Fabshine) complete all as specified & directed.

Supply and fixing stainless steel plain basket of size 15”x18”x6” (Make: Everlite/ Slimline/Peacock/Fabshine) complete all as specified & directed.

Supply and fixing stainless steel plain basket of size 15”x18”x8” (Make: Everlite/ Slimline/Peacock/Fabshine) complete all as specified & directed.

Supply and fixing stainless steel partition of size 17”x20”x6” (Make: Everlite/ Slim line Peacock/Fabshine complete) all as specified & directed.

Supply and fixing stainless steel cutlery of size 17”x20”x6” (Make: Everlite/ Slim line Peacock/Fabshine) complete all as specified and directed.

Supply and fixing stainless steel grain trolly with stand of size 21”x17”x10” (Make: Everlite/ Slimline Peacock/Fabshine) complete all as specified and directed.

Supply and fixing stainless steel cup & soucer, trolly of size 15”x18”x4” (Make: Everlite/ Slim line Peacock/Fabshine) complete all as specified and directed.

Supply and fixing stainless steel Plate basket of size 24"x30" (Make: Everlite/ Slim line Peacock/Fabshine) complete all as specified and directed.

Supply and fixing 20” long telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed (Make: Nixon/Radol/Ozone Ultima or Equivalent) complete all as specified and directed.

Supply and fixing 150 mm size stainless steel bright finish handle for cabinet shutter.

Material and labour for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed

Material and labour for 100mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base finishing the surface even and rough to receive floor finishes complete all as specified and directed

Material and labour for durastone vitrified tile 400x400x10 to 12mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in seismic and other similar bands, coping, bed block or similar work including necessary form work as in filling of pressed steel door frame complete all as specified and directed

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out in any type of soil returning, filling in and ramming earth in layers n.exc 25cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 (40mm graded stone aggregate) as in foundations and mass concrete complete all as specified and directed

Supply and fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1998 complete all as specified and directed

Material and labour for mild steel plates plain, square cut welding to base of hollow pipes etc complete all as specified and directed

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified and as directed

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

Removing excavated material (soils) to a distance exc 250m but n.exc. 500m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for sand cushion 25mm thick under floors including watering & consolidation complete all as specified and directed.

Material and labour for 60mm thick Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006 of M-35 grade complete all as specified and as directed

Material and labour for Providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed

Material and labour for cutting holes into or through brick walls built in cement mortar and making good in n.exc 150 Sqcm cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed

Material and labour for precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in Manhole cover slab set in CM 1:4 including necessary formwork if required complete all as specified and directed

Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for refixing of serviceable light, accessories for taking credit of unserviceable light and accessories as per Sch of credit and making good disturbed surface of walls, roof, floors etc. with any type of civil workd involved complete all as specified and directed.

Material and labour for point wiring for light/fan point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl steel sunken boxes of suitable for modules for modular fitting/accessories including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engineer-in-Charge.

All as per Srl item No. 146.00 here-in-before but for one socket outlet 5 Amps on independent board complete all as specified.

All as per Srl item No. 146.00 here-in-before but for one socket outlet 5 Amps on the same board controlled complete all as specified.

All as per Srl item No. 146.00 here-in-before but for one bell point controlled by one bell push complete all as specified.

All as per Srl item No. 146.00 here-in-before but for one light point controlled by two way switches complete all as specified.

Supply and fixing in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified.

Material and labour for sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 2.5 Sqmm drawn through in and including new PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity single wire FRLS PVC insulated unsheathed multistranded copper conductor cable 2.5 Sqmm ( green insulation) with any type of civil work including making good to disturbed surfaces to match existing surface complete all as specified. Note: Two run of 2.5 sqmm wire and one run of 2.5 sqmm wire as earth wire including PVC conduit shall be measured as one unit.

Supply and fixing Modular switch piano flush type, 6 Amps AC single pole, one way complete all as specified.

Supply and fixing Modular switch piano flush type, 16 Amps AC single pole, one way complete all as specified.

Supply and fixing Modular socket out let 6 Amp, 5 pin, 2-in-1 flush type complete all as specified.

Supply and fixing Modular socket outlet multi purpose 2 in 1, 5/6 pin, 6 & 16 Amps, flush type complete all as specified.

Supply and fixing in repair Decorative wall mounting light fitting (City-1) suitable for 09 watt LED lamp complete with glass shade/ polycarbonate cover including 1 x 09 watt retrofit LED lamp complete all as specified and directed..

Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified.

Material and labour in replacement Bell electric AC (Ding Dong) 240 volt SP complete all as specified.

Material and labour Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

Supply & fixing LED retrofit lamp 9W , 6500K, 220-240V with base cap B-22. complete all as specified and directed.

Supply and fixing 2 Module five step fan regulator, electronic type, single phase, including connection complete all as specified.

Supply and fixing in replacement Modular bell push switch flush type 5 Amps, SP, 240 volts complete all as specified and directed.

Material and labour for sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 4 Sqmm drawn through in and including new PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity single wire FRLS PVC insulated unsheathed multistranded copper conductor cable 4.0 Sqmm ( green insulation) with any type of civil work including making good to disturbed surfaces to match existing surface complete all as specified. Note: Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire including PVC conduit shall be measured as one unit.

Material and labour for SPN DBs, 4 way double door, complete all as specified and directed

Supply and fixing MCB SPN 32 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Legrend/ ABB/ Siemens/ Hager. complete all as specified and directed by Engineer-in-Charge

Supply and fixing MCB SP 6 to 32 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Legrend/ ABB/ Siemens/ Hager. complete all as specified and directed by Engineer-in-Charge

Supply and fixing LED lights fitting 1x 20 Watt, 220V AC decorative box type frame with holder including LED tube rod 20 watt connecting up single/ double connections with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Supply and fixing LED light fitting mirror type with high out put diffuser 9/10 watt 220 V AC decorative type including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

Supply and fixing energy saving bulk head light luminaire with opal diffuser LED 10 watt 6000 K, power factor more than 0.90, IP-65 class-I protection with high efficiency BIS marked LED electronic driver, surge protection 2 KV, operative on 140 volts to 270 volts AC supply complete prewired, connecting and testing complete all as specified and directed.

Supply and fixing single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amps including Top Plug complete all as specified & directed by Engineer-in-Charge.

Supply and fixing exhaust fan, Metal body AC single Phase. 230V of size 225/230 mm sweep with blades, frame and louvers complete including making/ cutting of hole in wall of any thickness and making good to disturbed surface complete incl plastering all as specified and directed.

Material and labour for Cutting holes for exhaust fan of size 225/230 mm dia sweep in brick walls built in cement mortar or cement lime mortar and stone walls built inline mortar for inserting holdfasts and making good dismantled / disturbed portion in cement mortar 1.3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed

Material and labour for taking down carefully and refixing Exhaust Fan of any sweep or make, painting of fans complete (as per previous colour) with synthetic enamel paint by spraying, cleaning all dust etc including replacement of flexible wire, bolts all as specified and directed.

Supply and fixing in replacement FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm single core for invertor wiring passing through PVC conduit complete all as specified and directed

Fixing only serviceable light fittings any type and any description obtained from Srl item No 145.00, including necessary electric connection with round flexible wire with multi stranded copper conductor of size 0.50 sqmm, 3 core, 1100 volts grade complete all as directed.

Taking down carefully and refixing ceiling fan of any sweep or make, painting of fans complete (as per previous colour) with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc including replacement of flexible wire, rubber reel, nut, bolts all as specified and directed.

Material and labour for taking down Geyser of any capacity or model after disconnecting all water supply and electric connections complete all as specified and directed.

Material and labour for Repainting of geyser ( as per existing colour) by spraying with two coat of synthetic enamelled paint after cleaning all dust etc, after cleaning of inner tank and minor repair work including transportation of geysers from existing site to contractor's workshop and workshop to existing site complete all as specified and directed

Material and labour for fixing only Geyser of any capacity or model installing with new fastener, connecting all water supply and electric connections testing and commissioning complete all as specified

Material and labour for PVC connections for water heaters with PVC flexible pipe 15mm dia 450 mm long, suitable for hot water size with 02 Nos connectors and washers complete all as specified and directed

Material and labour for taking down carefully TPN DB 4 way DB 4 way including MCB SP/TPN by taking shut down and disconnecting all electrical connections and fixing the same, including cutting, chases and plaster work, making good to disturbed surfaces and making electric connections complete including testing and commissioning to the entire satisfaction of Engineer-in-Charge.

Material and labour for repair of niche of size 2.30 x 2.20 mtr with plaster and brick work on brick/ concrete surfaces, plaster, finishing the surface even and fair including cleaning the wall scrapping down with wire brush including filling cavities with cement or bricks, making good to disturbed surfaces all as specified and directed.

Supply and fixing Modular switch cover plate with frame of white colour suitable for 2 module complete all as specified.

Supply and fixing Modular switch cover plate with frame of white colour suitable for 3 module complete all as specified.

Supply and fixing Modular switch cover plate with frame of white colour suitable for 4 module complete all as specified.

Supply and fixing Modular switch cover plate with frame of white colour suitable for 6 module complete all as specified.

Supply and fixing Modular switch cover plate with frame of white colour suitable for 8 module complete all as specified.

Supply and fixing 1 Module blank (dummy) plate suitable for Modular switch cover plate complete all as specified.

Earthing complete in replacement with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved all as specified and directed and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

Ms Sanjiv Kumar

G S TRADERS

SANDEEP JHANJI CONSTRUCTIONS

SANMATI UDYOG

S S CONSTRUCTION

M/S Kuldip Construction Co.